How to clean an Aircon // DIY Aircon Service - Panasonic // Fix Aircon Leakage 

Thanks for all the views, if I had known in advance that this video would get so many views, I would have put more effort into better recording quality. I'm considering to create a better version including your feedback and missing information based on the comments received.

Thank you for a step by step demo of this service. I live 300km away from any service people and they charge quite a lot to do the job. I'm going to try this tomorrow. I'll post again to let you know how I went. Very helpful.

Thanks man i followed your video just now and manage to clean 3 of my Panasonic AC at home and it's damn cold now. Saved me 500 ringgit. Im gonna reward myself with cold beer now lol

Thank you. Your video was easy to follow and without it I am sure I would have had a lit of trouble. My aircon was really dirty. The air smells so fresh now. Like a new one.

Hi, I like to give a HUGE thank you to you. This DIY video helped me alot when I was fixing my aircon yesterday. My aircon was leaking for awhile then I stumbled upon your video and you gave such a great and informative tutorial. For me it took the entire day yesterday as I always went through trial and error but your video helped me alot especially when the country is under lockdown and I cant call for service. Now my airconditioner is running well and not leaking anymore. So again thank you very much!

Our air conditioners are the same. One minor difference is the steps on how to disassemble and assemble it together. Apart from that, it is helpful. Thanks.

Great tutorial, man! Keep up the good work! I just have two recommendations. First one is to switch off the breaker for the AC from the control box. Second is to clean the radiator as well. This and the turbine are the two main mold collectors. You can use an industrial degreacer, works like a charm. Just don't let it sit on the aluminum radiator for more than a few minutes and rice it well with some water. Hope this helps you and everyone else.

Finally got it up and running. The only delays we had was because we realized we needed some extra parts (I’ll list that below) ru-vid.comUgkxihMYiJNXcHdbH-7ihymsLz61l7jVyb5O . So we have a loft where our current hvac just couldn’t seem to keep cool during the summer. We have been using a window unit since we bought this house over 6 years ago (all the houses in this neighborhood were built in the 80’s and majority of the houses built like ours use a window unit). I hate window units because they are just so noisy and the one we had really only cools one side of the loft. I had contemplated upgrading our current HVAC, but with all the rising prices these days, it would take years before saving up enough to do that. With the advice of my father-in-law (used to run an HVAC business), he recommended we get an inverter instead. We thought we bought everything we needed, but there were just a few other parts we didn’t anticipate needing (which is what caused most of our delay). My friend and father-in-law did all the work to get it installed and running and now we have nice cool air circulating nicely throughout the entire loft. It is very quiet and even the outside unit is much quieter than our main HVAC unit. Saved ourselves thousands getting this.

This was a pretty amazing guide. You deserve an award! Thank you.

Thank you so much for the step by step guide for aircon service. Great job guy....

Thanks for this tutorial video.really helpfull one.

Thank you. Hi from Turkey

Thank you for your tutorial. Very informative

Cheers mate thank you for the information. Excellent.

Thank you so much for posting this! It was quite confusing for me to open the aircond because some of the screws are hidden and wondering where was it. But then I found your video, I go-through it with your video while doing it. Danke

its really helpful we have a same aircond unit maybe next can try show us how to clean the the outdoor unit

Good man. I got a 2.5 +3.2 Panasonic conditioner similar to yours. Last night, It leaks a little water. After watching your video. I think I can fix that little problem myself. Thank you very much for your nice video indeed.

thank you for make it in detail . i fixed it by myself by watching your video thanks youuu🥰

thank you👍

Thank you

Before washing the parts I find it best to use a vacuum with the long bristle brush attachment to remove the majority of the dust first. Depending on how well the vacuuming is done there may not be a need to wash the parts.

Thank you, I hv learnt alot am going to put it in practise

thank you

Reinhard, many thanks!! Haven't done it yet, but at least now I have instructions. 🙏 You mentioned using Stetol (or similar sounding) spray. For disinfection. Is that specific for aircons? (It just came to mind that a specific about aircons is that whatever you spray on those surfaces also gets into the air that's blown out of the Aircon later, so probably needs to be safe for inhalation) Thanks again!

Thanks!

Thank you, a very good detail cvideo co tent . I see that you can easily removee the flap and fan blower. I ll try and do this.

-nice- cool!

You don't have to remove the set's screw for the cross flow fan all the way , just loosen it till you can slide the wheel to remove.

Thanks for sharing. Really helpful!

Very detailed helpfull Video Thanks for your efforts Thou please mention how to check and clean the nano-air-purifier device on the ac

Thank you for yor demonstration, but how to install the bigger size motor into the dark shell in the right side

I have 3 of these AirCons..... all 2.5 Tons..... and it's a pain cleaning them. Especially dismantling the the front 4 way swings ........ The worst part is that I have my telly right under the AC...... big big mistake....... Next renovation or house, that's going to change for sure.

at 6:48, what is the cone shape that protrudes from plastic lower part? i pumped water into it while washing the unit and noticed it no longer flares as the AC is running( it used to). did I mess it up?

Thank you for your tutorial and great info!! But cam view still got lot of way to improve. :) (feel dizzy when watch)

Working solo with head cam sometimes don't give proper view, coz our head keeps moving...still great work...👍👍

Hi, after mounting I have vibrations on the inner body. What I can check?

Hello, please how long it takes for such a mold to grow in the unit? Does cleaning it once a year professionally prevent this or is this on your video one year worth of growth? Did you use Nanoe feature much? I thought this should prevent it too. Thank you!

คุณไม่ฉีดนํ้าล้าง คอล์ยเย็นหรือ

Why u didn't clean the coil ?

👍

I have a weird problem after the cleaning (following all your steps) - the AC turns on, all lids are moving fine, the fan is rotating without normally, nothing different than the normal work of the AC. But after few minutes I realized that the fan is just rotating and not blowing anything. You can feel the radiator is heated up a lot, the air around the fan is hot. But it is not blowing it outside. I unplugged and plugged again the AC, switched of and on several times - no change. I took photos on every step and I have one with the exact spot of the thermal sensor on the radiator. I put it back then. I cannot find out why it is not blowing. Can you give me an advise what to check ?

Du solltest die Schraube vom Lüfterrad nie ganz herausdrehen sondern nur um ein paar Umdrehungen lösen.

👍🏻❤️

Would be nice to point what need to remove first pointing camera at it..then remove..would be more clear

07:45 My radiator won't move so I can't get the drum out :(

Poor in cam operation, not visible each and every screw and where it was to open

u r not cleaning the coil

☕️🙏🙏☕️🙏👍👍👍

panasonic econavi ac

parownik jak był, tak po myciu dalej jest zajebany czarnym nagarem. użyj RENEWZ "a będzie Ci zapłacone podwójnie" Tylko Renewz ,reszta shit.

YOU did not clean the evaporator(cooling coil) which is very important!

The main part u didn't clean

Not properly visual,not clearly seen

I would totally ruin this and have to pay someone to come put it back together 🙄

The filming was not very good..one cannot see what is being done!!!!

Poor videography