No video :(

How To Clean And Re-Seal A Stamped Concrete Patio | Everything You Need To Know

Подписаться 298 тыс.

Просмотров 179 тыс.

50% 1

#Cleanandsealconcrete #resealstampedconcrete #mikedayconcrete
How to clean and re-seal your stamped concrete patio. This video is a complete tutorial on how to clean your concrete before re-sealing, what's the best sealer to use for stamped concrete, and how to apply the stamped concrete sealer.
I start by showing you the best pressure washer attachment to use to clean concrete with. Then I show you how to clean your stamped concrete.
After the concrete is clean and dry, I talk about the best way to apply the sealer and the best sealer to use for your concrete to make the colors pop and to protect the concrete.
I am using Foundation Armor's AR 350 solvent acrylic concrete sealer to seal this stamped concrete patio. This is a matte look sealer, they have a high gloss sealer AR 500 if you want that look.
I did my best to answer all you questions you might have about cleaning and re-sealing stamped concrete. If you have any other questions, leave them in the comments and I'll try to answer them for you.
FOUNDATION ARMOR 350 CONCRETE SEALER:
amzn.to/2Yy2zk1
STAINLESS STEEL PUMP UP SPRAYER:
amzn.to/31voDce
(This is the one I'm using in the video)
PRESSURE WASHER:
amzn.to/31r4eVy
SURFACE CLEANER ATTACHMENT:
amzn.to/2MQu696
18 INCH PAINT ROLLER:
amzn.to/2KpvZZ1
18 INCH ROLLER FRAME:
amzn.to/2MQurIU
POLE FOR PAINT ROLLER:
amzn.to/2GY1Qh9
LEARN HOW TO STAMP CONCRETE:
mike-day.mykaj...
MY CONCRETE SLAB COURSE:
mike-day.mykaj...
VISIT MY WEBSITE:
www.everything...
USE THE SAME TOOLS I DO:
SPECIAL DEAL: Use Coupon Code EAC on all equipment and tools bought from Marshalltown's website and get 10% off the price plus FREE SHIPPING!!
MARSHALLTOWN POWER TROWELS:
marshalltown.c...
MARSHALLTOWN SHOCKWAVE VIBRA-SCREED:
marshalltown.c...
MARSHALLTOWN CONCRETE TOOLS:
marshalltown.c...
TOPCON LASER LEVEL:
amzn.to/2VrJ3zV
DEWALT PENCIL VIBRATOR TOOL:
amzn.to/2Km5Zis
INVERTER GENERATOR LIKE WE USE:
amzn.to/2XfWfwe
BULLFLOAT:
amzn.to/2U1Kx2F
HAND FINISHING KNEE BOARDS:
amzn.to/2TZmTUj
MAG FLOAT & STEEL TROWEL SET:
amzn.to/2IgmDOq
2" MARGIN TROWEL:
amzn.to/2G33KNn
CONCRETE PLACER OR KUMALONG:
amzn.to/2I00gxp
CONCRETE FINISHING BROOM:
amzn.to/2UytU2B
CONCRETE SCREED:
amzn.to/2WZxtwm
CONCRETE EDGER:
amzn.to/2GbGkEp
CONCRETE GROOVER:
amzn.to/2PaL414
BOSCH HAMMER DRILL:
amzn.to/31AHnaN
MY RECOMMENDED TOOLS PAGE:
www.everything...
SUBSCRIBE to my email list and get my FREE video guide on how to get the perfect broom finish on a concrete patio:
forms.aweber.c...
Follow me on Twitter:
/ creteexpert
Follow me on Instagram:
www.instagram....
Follow my Facebook Page:
/ everythingaboutconcrete

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 213

@keithdale5841 3 года назад

By far, one of the best DIY videos I've seen. Thanks so much. If you lived close to me it would be worth my money to pay you to do the job.

@MikeDayConcrete 3 года назад

Thanks Keith!

@rslr 3 года назад

Hey Mike - thank you so much for taking the time to share this information and for putting together such a helpful video. After clicking through a few other 'how to seal' videos, I quickly realized yours was the most comprehensive. Thanks for not skipping steps and taking a step-by-step approach. Appreciate it. I think I've finally got the information (and courage) I need to re-seal our patio next spring. Take care.

@dksellou Год назад

He is amazing!

@blitzmakesunevenmm4323 4 года назад

Going thin on your sealer applications (400 sq. ft./gal.) and spraying the solvent you used as your tool cleaner back into your solvent- based sealer container are great tips and makes perfect sense after seeing it done.

@MikeDayConcrete 4 года назад

Thank you

@LanNguyen-ss5dn Год назад

Hi Mike, I'm a 70 years old retiree who has nothing to do at home for killing the time , it is so boring and I want to impress my old lady by DIY to recolor & sealing my stamp concrete in the back & front yard And after watching quite a few videos on you tube I start to have a little confident for my self that I could do it and after all of those , your video as the last , I would say this : ' Thank you so much For an excellent video that you have made with your daughter to show to the world how to do the perfect job of cleaning and sealing concrete , you are the best of the best SIR , you should work as The instructor for city college or some private school to teach people remodel their house or home improving . At last thank you so much .

@MikeDayConcrete Год назад

Thank you!

@Harvardfacebook 3 года назад

Great teacher, I paid attention all the way through...

@MikeDayConcrete 3 года назад

Thank you!

@harmonsteamway7222 2 года назад

Great information, and it is also great to see your daughter working side by side with you, great family bonding.

@cyclonic7134 4 месяца назад

This is a damn solid DIY video. I feel like i could totally do this now. I love this guy.

@lkstaack74 5 месяцев назад

I followed this video to seal my driveway and patio three years ago, and I'm reviewing as I prepare to do it again. However, I won't be using AR350. It turned out great initially, but the sealer started turning a milky-white sheen in random areas after about six months. Then, it began to show significant wear after a year. The sealer is all but gone three years later.

@oscarvenegas2420 2 года назад

Best video I’ve seen on resealing stamped concrete, very detailed, thank you! You gave me confidence to take on my 700 squared feet project with some hairline cracks.

@bruceblankenship7036 11 месяцев назад

Thank you Mike for a very great training video for resealing my patio stamped cement.

@iowamatt2519 5 лет назад

I've got to have the ez clean, I get tired of going over it several directions to eliminate lines. I have about 50 yards worth of decorative at my own house i've been neglecting. U made my sunday morning, just wish I saw this yesterday when I powerwashed for 6 hours at my place.

@michaelpostell799 3 года назад

The best vidoe ever on how to clean & seal your stamp concrete.

@JMO777X Год назад

This video is top tier quality. Much appreciated thanks!

@chrmbly 3 года назад

This was a great DIY video, helped me do my own stamped concrete patio and worked great. Thanks Mike!

@garciavega3298 2 месяца назад

Great video. I tried the xylene this weekend and it looked good when laced but when it dried I seen all of the grey /dry spots re appear. I think it needs to be stripped and re applied. I’m going to purchase your recommended stealer from Amazon. I noticed after applying the xylene after 2 days it feels crunchy when walked on it . I’m going to strip and remove it asap.

@ajnunya5518 3 года назад

This is a SUPER informative video! Thank you 🙏. I was originally going to roll it on but this spray method with the backrolling looks a lot better for my uneven concrete (made that way). Thanks a bunch and great video 👍

@cameronoverfield8764 5 лет назад

I like what you do keep it up.

@user-be2dl6ks2b Год назад

Thank you Mike for putting together this super detailed informative video. I'm going to do it myself now.

@coryharrison9659 2 года назад

This video is exactly the information I was looking for. Thanks for being so thorough!

@user-ql7mx8qs5r 2 месяца назад

This is the most detailed and professionally done video on the subject. Thanks for the time and effort (including your beautiful helper) to explain everything to newbies like us. Appreciated.

@MikeKolker 4 года назад

Many thanks for the comprehensive video Mike. You've given me confidence that I can reseal my concrete patio myself. Part of my patio is covered and part is not. The part that is not covered has little to no sealant on it anymore (as expected). However, the covered portion is still somewhat sealed and glossy (solvent-based). Do I need to strip that old sealant off or can I just cover it with a light coat of new sealant after cleaning it? Again, thank you!

@SometimeAgo65 Год назад

Love it...its beautiful!! I would have to stain and seal the wood around porch too...but this is very nice ❤

@jackkocks9838 2 года назад

Nice job and instruction. Thank you!

@MikeDayConcrete 2 года назад

Glad it was helpful!

@johngueli6293 Год назад

Thank you for the video and tips!

@MikeDayConcrete Год назад

Glad it was helpful!

@tylercone8545 2 года назад

This was beyond helpful. Thank you Mike, you da man!

@tessm9775 3 года назад

Awesome video, thank you so much.

@MikeDayConcrete 3 года назад

Thank you!

@Kettenhund75 4 года назад

Mike, we have smooth stained concrete floors throughout our house. Everywhere there is a crack in the concrete and next to most of the baseboard the concrete sealer is turning white. It's very unsightly, and I would like to address it. How would you do this in an enclosed area? Can you spot seal to get rid of the white areas? Do you have to do the whole floor?

@erwmlw 9 месяцев назад

Nice job just wish you would have showed a final overview of it after it had dried completely and i have a question about the over spray on the house and post doesn't it show?

@franciscojavier4670 4 года назад

Awesome explanation!!!! One question, what kind of roller is that ? Name ?

@sarasmith8596 4 года назад

Thanks I may be able to do this. Great and thorough

@gator7082 4 года назад

Awesome,thank you, this certainly helps.

@hustlindaddiy5194 4 года назад

Great video Mike. Thanks for posting.

@jina111111 3 года назад

Thank you for your easy to follow tutorial video.

@jerryw4881 4 года назад

Great video....thanks for taking the time to explain step by step.

@MikeDayConcrete 4 года назад

Glad it was helpful!

@anthonyross3957 2 года назад

Amazing. Thank you so much. Great information.

@christianspahr7336 2 года назад

What about your over spray on vinyl does the solution damage siding

@andrewcarmack1075 Год назад

Hey Mike, I had a stamped patio done. The stamping didn't come out the best with the lines in the pattern. It's a basic square and rectangle design. Can I ask them to grind the missing lines in? I know the color might be off, but I feel like it would look better than have them missing.

@bethcarty397 4 года назад

Great video, Mike. It gave me encouragement that we can do this ourselves to restore our 2500 sq ft of stamped concrete (driveway & patios) that have been neglected for 20+ years. The one question I have is about applying the new sealer. I live in Southern California and the stamped concrete gets VERY HOT daily. If I apply the first coat of sealer in the late afternoon/early evening like you suggested (when the concrete is cooling off), is there any problem if I wait until the next morning to apply the second coat? I don't think I'd have enough time to get both coats applied the same day.

@mudwellies1 2 года назад

I wish he had answered this question...same boat

@jayt6215 3 года назад

Thank you. Great, very informative.

@janellehansen658 3 года назад

The concrete company we hired 3 years ago put color on as a top layer with the sealer. We need to reseal. Do you think the color will "revive" with the new sealer? Can we test it ahead somehow? They left alot of bubbles and now there are white spots like you describe, but we are afraid maybe the white could also be where the sealer is no longer covering and possibly leaving us just gray concrete without color? ??? I am anxious to try your methods. You do a GREAT job explaining. We bought the things in your links, also! (Except a lacquer sealer we already have)

@BigTpowerwashing 3 года назад

Excellent video..thank you

@MikeDayConcrete 3 года назад

Glad you liked it!

@chuckwhite9198 3 года назад

Outstanding video. So thorough and easy to follow. Question: With stamped cobblestone colored concrete patio/driveway, what PSI is appropriate when doing cleaning?

@kbob8424 4 года назад

Great video. What if you want to spray a stamped concrete sidewalk surrounded by artificial grass? Do you need to cover it to protect from overt spray or just avoid it as best as possible?

@MikeDayConcrete 4 года назад

Not sure what it would do to artificial grass but someone can be holding a piece of cardboard along the edge while you spray to block any over spray.

@erickpena5004 4 месяца назад

Is it okay if I use Xylene all over the concrete patio and then do sealer afterwards? My stamped patio is 5 years old now and has never been resealed.

@YourLocalRealtor50 3 года назад

is over spray a concern on the wood posts and siding?

@jorgenj1 Месяц назад

Can I use pain thinner instead of the Xylene

@chrispraet5424 4 года назад

Looking for your video on stripping old sealer before applying new sealer to stamped/colored concrete that you mentioned at 15:30 of this video. I am from Michigan and using Euclid Chemical products and was told to roll xylene on and let sit for a bit and then wipe off with rags to keep from harming grass/plants in the area and making a mess?? They said a couple applications might be needed to remove all/most of old sealer.

@fakeleftr 4 года назад

I was also hoping to find this, but searching all Mike's videos doesn't seem to show anything. Either way, thanks for this video, I think I can finally get our stamped patio fixed up right.

@gaylacrisler9818 3 года назад

Great video, but very little said about water based sealer. Can’t find a video to show how to strip and seal it again.

@romeoswish 2 года назад

Hi Mike, Great video! Quick question. Once the stamped concrete is finished and curing, at what point does the sealer get applied first? At exactly 3 days after curing or more days etc?

@Mikeexteriorcleaning Год назад

Minimum 14 days is the standard

@sharamighandi5740 Год назад

Thank you for the video. I was wondering if there is a safer version of sealer- most of the concrete sealers have the California warning- contain carcinogens 😞

@bridgetbleigh8895 5 месяцев назад

Do u have a link for all the tools equipment you used

@Cocora22 4 года назад

First of all, you did a fantastic job explaining and demonstrating the process. Thank you! I used that exact same sealer on our walkway last September. I rolled it on and initially it looked fantastic. Now it looks whitish in places and brittle in other places, but only in areas where the weather really hits it hard and also where we walk. Additionally Xylene is a precious commodity in the state of Maryland, I hoarded several gallons last year while it could be had. Now that it’s not available what other solvent might you suggest? I pressure washed it today and my plan was to go over most of it with a roller and xylene and try to reconstitute it and then decide if I should reseal it with more product. I have a feeling I may have put it down a bit too thick. Any suggestions?

@MikeDayConcrete 4 года назад

Yea, Xylene is the best for thinning it and trying to remove the whiteish areas. You can try Acetone or Laquer thinner also. If it's too thick and needs to be removed you can check out this sealer remover: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-66QLH1pMfjY.html

@arod2435 3 года назад

Hi Mike love your videos ,learned alot, my problem was i was applying to much Sealer , My Question is I have Brand new Porcelean flooring in our Backyard, Can i put Foundation Armor AR-350 On it?

@crkimberly 3 года назад

Excellent video, Mike. Very helpful. I just wiped some Xylene on a white area on my patio. The whiteness didn't go away and the surface didn't get tacky. Does this mean the previous owner used a water-based sealant? Is there anything else I can do to confirm?

@joerosenti2979 3 года назад

Thanks for the video. Are you using the nozzle that comes with the sprayer?

@user-rp1lt1jy1p 3 месяца назад

so you start off with a "dry" 18" roller, correct?

@stephendesimone7388 Год назад

Mike, Great video. My question is to do with my colored stamped concrete that is about 35 days old. I sealed my exposed aggregate walkway a few days ago that was poured at the same time. Some of the "cream" gray color is visible on the exposed aggregate because I believe that the release agent didn't remove it all. It was not evident when wet with water or wet while I was sealing it. I had pressure washed the stamped and the exposed numerous times. Before I seal the colored stamped concrete, I'm thinking I should wash it with a mild muriatic acid solution so I don't end up with the same condition on it. Does that sound correct? I didn't put the second coat on the exposed aggregate after I saw what happened to it. Does the acid wash cut through most sealers or will only xylene?

@TheJackie2007 2 года назад

Nice job Mike

@pattysnyder6133 11 месяцев назад

Why do I need Xylene to clean the sprayer when the product I'm putting down is acrylic-based. Won't soap and water clean the sprayer?

@ravireddy2535 Год назад

Thank you Mike for a great video with all tips & tricks of the trade. I got the same sprayer tank you linked in the description; but when I tried to spray with it though, it sprays differently than yours…it was spraying more on the edges and less in the middle. Are you using a different tip or something? Please advice.

@scottherzog5746 3 года назад

Great video learned alot

@dognatious6153 3 года назад

This works good if you are just doing your annual re-sealing maintenance and the sealer is sightly dull, but not de-laminating. (That's assuming you used the correct sealer/ commercial sealer initially.) If you have multiple sealer layers that are failing, or lacquer-based sealers that are failing (aka, de-lamination) this won't work very well to remove the exfoliating sealer. Only the weakest peeling sealer will come off with this method. But remember, this machine could also further loosen more of the competent sealer. It could be daunting. So, if you are trying to restore the concrete stain (i.e., re-staining the concrete) or removing de-laminating sealer, you must remove ALL of the topical sealer. We have a cost-effective way to remove it using mechanical AND chemical stripping techniques. Stripping a sealed, stamped concrete slab (in preparation for re-staining or re-seaing) is generally considered the contractor's worst nightmare. We do those "nightmares" regularly, successfully. Re-sealing over de-laminating sealer creates a bigger and bigger headache later. It's like painting over loose paint. YOU MUST DO PROPER SURFACE PREP. And re-seal the concrete lightly with a sprayer, every year. USE the RIGHT sealer for your area. Certain sealers have miserable UV-resistance and poor weather-resistance. And barrier sealers are the worst because the laminar layer blocks moisture, and poof, eventually moisture pushes it up (de-lamination) and the entire slab turns white (hazy). Concretetransformed.com (PS There is soda blasting which works great, but generally the minimum charges for them to show up is bout $1500.)

@richard4647 2 года назад

Great video! One question: How do you gauge the "thickness" of the sprayer's application of the sealant? You mention 400 and 300 square feet per gallon. How do you know how much you're putting down? Thanks.

@henryraymond383 2 года назад

, I

@SeanPD1193 4 года назад

I have the Chapin 1949 sprayer and wondering which tip you use? Mine has 1/2 gpm and 1 gpm. Thanks

@BigTpowerwashing 3 года назад

Hi Mike..I just recently sealed a driveway with solvent-based wet look sealer after cleaning the entire drive which was previously sealed. As soon as I sprayed the sealer on my helper started to backroll and the sealer immediately became stringy no matter what type of roller I used. Luckily I did the entire driveway without having to backroll. In your video, your helper has no problem backrolling the entire patio..Even though the drive came out great what could have happened for future reference? Thanks, Mike

@richardpowers4200 4 месяца назад

Hi Mike! Curious about thoughts to only pressure wash vs. using simple green too?

@bradleymindt900 3 года назад

Videos are to the point.

@carloagostini3792 3 года назад

Awesome video!

@michaelbusada2429 3 года назад

Hey Mike, great video. I plan on resealing my stamped concrete around my pool this summer for the first time. I was wondering, I have been told to add a grip to the sealer to help with the slippery conditions when wet around the pool. Is there a grip additive you would recommend? Also, can a sealer that has a grip additive still be sprayed on or will it gunk up in the sprayer? Thanks so much.

@MikeDayConcrete 3 года назад

Foundationarmor.com has grip additive. And it's easier to roll it on, yes.

@jamesmcgarity614 27 дней назад

Does it hurt vinal siding

@LizNguyen 4 года назад

Is getting the sealer on the walls not a concern? I was going to tape off the edges but I don’t want to waste time If not needed. And how long between coats? Thank you!!

@suenewport9145 4 года назад

Great video, Mike. thank you for sharing your expertise. Here is what I have happening. I have cleaned my stamped concrete and was totally amazed, it hasn't looked that good since it was poured. Now my question is, I have a pink sidewalk and patio which was suppose to have a dark brown release on it but I swear that our people forgot that part (it was pink from day one). This was poured about 1994. I was wondering if I could stain the concrete with a brown before sealing it to try and get rid of some of its pinkness. It is worn and tired and you can see a lot of the pebbles at the surface now. How would you suggest that I proceed? I purchased the sealer you recommended and am excited to move forward however I don't want to mess things up. If you think I can stain it what would you recommend?

@MikeDayConcrete 4 года назад

Sue, check out this sealer - it has a brown tint to it, maybe it's what you're looking for: www.foundationarmor.com/agbrown This company also has other tinted sealers you can use to color (re-color) your concrete.

@pradipbulsara9263 3 года назад

@@MikeDayConcrete , which roller would you use , if only roller and not with spray.?

@al76groovekeeper 3 года назад

Love your videos

@audelioespinoza1934 4 года назад

This is a very helpful video, thx

@dksellou Год назад

Hi Mike, I followed your directions and I think I did a good job. However, the part of the patio which is exposed to sun and rain ( not covered by the roof) , still has spots that seem like there is no sealer or less sealer than the covered patio. Does this mean I didnt apply enough? Or after 1 month it is normal to fade? I would expect to last longer ( I used the expensive one you mention in the video). I dis the first coat using the sprayer and the roller and the second coat only the sprayer. After 1 month, will it be stupid to wash this part of the patio and reseal it for a third time using a roller? Or I need to power wash again and start all over again? Thanks!

@speedymg 3 года назад

Very informative. By a pool, there is also caulking, do you replace that before or after sealing? Thank you in advance.

@anthonyviscusi4042 3 года назад

Great video by the way Mike. What would you recommend for stripping concrete pavers that were sealed and painted over the years. I used xylene based products and I would like to take it down to the original paver and then just seal it. Any techniques would be helpful. Thanks.

@johnmessick424 Год назад

Hi Mike, I followed your instructions and I am very happy with my results. I purchased the Armor AR350 seal, stainless steel sprayer, the rollers, and even the surface attachment for my power washer. My stamped concrete patio looks even better than when it was originally installed. I do have a question. In the video you recommended sprayer the xylene cleaning agent back into the Armor AR350 solvent drum. Z Helene is not available in Delaware, the replacement is Klein Strip painter’s Solvent. Can the painter’s solvent also be sprayed back into the AR350 solvent?

@beardybeardface Год назад

I wouldn't. just get another container you can dispose. if the solvent in the sealer matches the cleaning solvent all he's doing is diluting it a little but if you use a different solvent you can ruin the formulation and it might not work next time.

@carymoreth1497 2 года назад

Great video! Is there any concern with overspray on vinyl siding? Is the non-slip additive effective when spraying it on or does it clog the nozzle?

@doggerproductions 3 года назад

One hell of a sprayer that😄👍

@my1948hummer Год назад

Can you tell me what size tip you are using? I have the Chapin Extreme sprayer and when applying Foundation Armor I dont get an even fan. The ends come out as a slight stream which is definatly not good for the second coat. Thanks in advance.

@richardplatt2020 2 года назад

Can I do this without a sprayer and get good results. I was thinking of just using a roller

@rtaylor3350 3 года назад

We had stamped concrete installed October 18th last year. My husband used a snow blower on the sidewalk and I noticed black streaks maybe from the rubber wheels. How do I clean those off before I reseal it? I wanted to put a sealer that doesn't make it slippery because when it's wet, and especially in the snow, it becomes dangerous. Thanks

@nanayaa7022 2 года назад

So it needs maintenance. Compound floor tile vs stamped concrete. What are thier differences.also which one is less to maintain

@tessm9775 3 года назад

Is it ok to leave the sealer in the sprayer for 1-4 hours between coats?? Or do you clean the can between coats? Thanks!

@MikeDayConcrete 3 года назад

It'll be ok to leave it in there.

@debratornes3956 4 года назад

This video is great! It was a big help, but I have one question. I power washed my stamped concrete patio. It is about 1,400 sq ft. My patio is 8 yrs old. The initial sealant was solvent based. About 4 yrs later I used Xylene over the whole thing to revive it and it looked great. It was sealed last year with a water based sealant by a contractor. After the water based sealant was applied the patio looked bad within a month. After power washing I can see most areas are without a sealant, but a few areas still have some on it. (like under the tables where there was no foot traffic or sun) Do I need to use Xylene on those shiny areas prior to using the AR350?

@rossibytes 2 года назад

We had a stamped concrete walkway installed almost 4 years ago. Unfortunately we did not reseal it and there are several spots where the color is turned to almost a white color and overall color has faded. The installer used a medium brown release when he did our walkway, but does the release get mixed in with the sealer to give it the brown color again or is just the sealer needed? Our installer also told me to never buy any other sealer products other than the type he used on the job and from the same company, no other companies.

@irahemtulla 4 года назад

Great Video, thanks. What’s the name of that disc cleaner which you attached to the Pressure Washer?

@MikeDayConcrete 4 года назад

It's right here: amzn.to/38hwuhU

@hubbzy1 2 года назад

Bought the same sealer. Applied with a roller. I think I went too thin on the first coat. Just right on the second. Now it looks slightly blotchy almost as if some of the areas absorbed more sealer than others. Would a light 3rd coat fix this?

@MikeDayConcrete 2 года назад

Yes, it should. That's normal, maybe roll those areas first, then do the 3rd coat.

@bigt4774 3 года назад

I think you said on the roller you use a 3/8 inch nap roller. Do you find that it sheds into the sealer or are they pretty much fine I've always used a foam roller thank you

@littleeddie133 2 года назад

Is that sealer going to damage the siding, when my contractor used Poly-seal 400 he got it on the siding and ruined about 2 feet up

@johnd9541 2 года назад

Shouldn't u mask/block off adjacent surfaces (posts, siding, block wall, etc) to prevent overspray/staining?

@00fastvic 3 года назад

great video my drive in the uk is flaking whats the best way to strip it please

@jmeponte972 4 года назад

Do you use anything to prevent slipping..we normally use shark grip which you can pour in the pump sprayer as well.

@MikeDayConcrete 4 года назад

Sometimes we do. Foundation Armor has their own product like Shark grip.

@jeff_9074 3 года назад

If I add Sharkgrip, should I add it to both coats or just top coat? Also I thought your supposed to wait 24hrs per foundationarmor instructions before adding second coat? Thanks!

@kerry7967 4 года назад

Shouldn't you cover the siding with plastic?

@bvknarula 3 года назад

Applied sealer last year and it's already looking really faded, some slight chalking. Should I just try xylene only?

@Kman. Год назад

I would think that the pressure washer will remove and lift off not only the remaining protective coat, but also the coloration on top of the concrete.

@leonidaavila4006 2 года назад

I like that flooring that because I dream to My house

@pollyramer5935 Год назад

What type of roller do you recommend, a foam roller or one with a short nap, i.e. 3/8" polyester?

@JS-km6ol 3 года назад

Hey Mike, I used a regular brush to apply the sealer on my stamping, and now there’s a layer of it and I’m trying to get rid of it, I tried to use xylene to remove the lair but it didn’t work, is there any chemical that you think can get rid of it, if u have any products can you send me the link here Thank you

@anthonyviscusi4042 3 года назад

I was also thinking about wet sandblasting to get the paint up. Do you think running the blasting media through the surface cleaner attachment is a good idea?