How to Clean Canon Printhead

Подписаться 27 тыс.

Просмотров 335 тыс.

50% 1

This will work for almost all Canon Printheads. Usually Canon printer heads are easy to remove and clean. Just soaking it may not always do the trick. Also, make sure you have ink in the cartrudges. This fix does not apply to printers with 2 ink cartridge system (Tri-Color and Black).
Link to a video on how I made a hose that I use in this video:
• Homemade hose for clea...
Cleaning Solution Recipe Suggestion:
Mix 40% windex, 20% ammonia, 40% hot water. Cold water is fine too, but hot water makes the solution warm and is more effective.
Another good solution for cleaning printheads is LA's totally Awesome" brand cleaner from dollar tree or dollar general. Mix 50% Cleaner /50% water (50/50)
Our Ebay store:
www.ebay.com/str/303electronics
Please like, share and subscribe ‪@303electronics‬
This cleaning process will work on these printheads:
QY6-0030, QY6-0031, QY6-0032, QY6-0033, QY6-0034, QY6-0035, QY6-0035, QY6-0036, QY6-0037, QY6-0038, QY6-0039, QY6-0040, QY6-0041, QY6-0042, QY6-0043, QY6-0044, QY6-0045, QY6-0046, QY6-0047, QY6-0048, QY6-0049, QY6-0050, QY6-0051, QY6-0052, QY6-0052, QY6-0053, QY6-0054, QY6-0055, QY6-0056, QY6-0057, QY6-0058, QY6-0058, QY6-0059, QY6-0060, QY6-0061, QY6-0062, QY6-0063, QY6-0064, QY6-0065, QY6-0066, QY6-0067, QY6-0068, QY6-0069, QY6-0070, QY6-0071, QY6-0072, QY6-0072, QY6-0073, QY6-0074, QY6-0075, QY6-0076, QY6-0077, QY6-0078, QY6-0079, QY6-0080, QY6-0081, QY6-0082, QY6-0083, QY6-0084, QY6-0085, QY6-0086, QY6-0087, QY6-0088, QY6-0089, QY6-0090, QY6-0091, QY6-0092
Canon Printer Models:
Canon BJ-5
Canon BJ-10E
Canon BJ-10EX
Canon BJ-20
Canon BJ-30
Canon BJ-30v
Canon BJ-100
Canon BJ-130
Canon BJ-130E
Canon BJ-200
Canon BJ-200E
Canon BJ-200EX
Canon BJ-220JC
Canon BJ-220JC II
Canon BJ-220JS
Canon BJ-220JS II
Canon BJ-230
Canon BJ-300
Canon BJC-50
Canon BJC-55
Canon BJC-70
Canon BJC-80
Canon BJC-85
Canon BJC-85W
Canon BJC-210
Canon BJC-210SP
Canon BJC-240
Canon BJC-250
Canon BJC-255SP
Canon BJC-600
Canon BJC-600e
Canon BJC-610
Canon BJC-620
Canon BJC-800
Canon BJC-1000
Canon BJC-2000
Canon BJC-2010
Canon BJC-2100
Canon BJC-2110
Canon BJC-3000
Canon BJC-4000
Canon BJC-4100
Canon BJC-4200
Canon BJC-4300
Canon BJC-4400
Canon BJC-4550
Canon BJC-5000
Canon BJC-5100
Canon BJC-5500
Canon BJC-6000
Canon BJC-6100
Canon BJC-6200
Canon BJC-6200S
Canon BJC-6500
Canon BJC-7000
Canon BJC-7100
Canon BJC-8000
Canon BJC-8200
Canon BJC-8500
Canon BJ-5
Canon BJ-10E
Canon BJ-10EX
Canon BJ-20
Canon BJ-30
Canon BJ-30v
Canon BJ-100
Canon BJ-130
Canon BJ-130E
Canon BJ-200
Canon BJ-200E
Canon BJ-200EX
Canon BJ-220JC
Canon BJ-220JC II
Canon BJ-220JS
Canon BJ-220JS II
Canon BJ-230
Canon BJ-300
Canon BJ-330
Canon BJ535PD
Canon BJ895PD
Canon i70
Canon i80
Canon i250
Canon i450
Canon i450X
Canon i455
Canon i455X
Canon i470D
Canon i475D
Canon i550
Canon i550X
Canon i560
Canon i560X
Canon i850
Canon i860
Canon i865
Canon i900D
Canon i905D
Canon i950
Canon i960
Canon i965
Canon i990
Canon i6100
Canon i6500
Canon i9100
Canon i9900
Canon i9950
Canon 50i
Canon 80i
Canon 450i
Canon 455i
Canon 470PD
Canon 475PD
Canon 550i
Canon 560i
Canon 850i
Canon 860i
Canon 865R
Canon 900PD
Canon 950i
Canon 960i
Canon 990i
Canon 6100i
Canon 6500i
Canon 9100i
Canon 9900i
Canon MultiPASS
10
C20
C30
C50
C70
C75
C80
C100
C530
C545
C550
C555
C560
C635
C755
C2500
C3000
C3500
C5000
Canon PIXMA iP1000, iP1200, iP1300
iP1500
iP1600
iP1700
iP1800
iP1980
iP2000
iP2200
iP2500
iP2600
iP2700
iP3000
iP3100
iP3300
iP3500
iP3600
iP4000
iP4000R
iP4200
iP4300
iP4500
iP4600
iP4700
iP4800 (iP4830)
iP4900 (iP4930)
iP5000
iP5200
iP5200R
iP5300
iP6000D
iP6100D
iP6210D
iP6220D
iP6310D
iP6320D
iP6600D
iP6700D
iP7100
iP7200 (iP7230)
iP7500
iP8100
iP8500
iP8600
iP9910
iP90
iP90v
iP100
mini220
mini320
mini360
iX4000
iX5000
iX6500 (iX6530)
iX7000
MP500
MP510
MP520
MP530
MP540
MP550
MP560
MP600
MP600R
MP610
MP620
MP630
MP640
MP700
MP710
MP730
MP740
MP750
MP760
MP780
MP790
MP800
MP800R
MP810
MP830
MP950
MP960
MP970
MP980
MP990
MG2100
MG2200
MG2470
MG3100
MG3200
MG4100
MG4200
MG5100
MG5200
MG5300
MG5400
MG6100
MG6200
MG6300
MG8100
MG8200
MX700
MX710
MX7600
MX850
MX860
MX870
MX880
MX882
MX890
MX892
MX922
Canon PIXMA E500
E600
Canon PIXMA Pro9000
Pro9000 Mark II
Pro9500
Pro9500 Mark II
Canon PIXMA PRO-1
PRO-10
PRO-100
Canon SELPHY DS700
Canon SELPHY DS810
Canon SELPHY ES1
Canon SELPHY ES2
Canon SELPHY ES3
Canon SELPHY ES20
Canon SELPHY ES30
Canon SELPHY ES00
Canon SELPHY CP-10
Canon SELPHY CP-100
Canon SELPHY CP-200
Canon SELPHY CP-220
Canon SELPHY CP-300
Canon SELPHY CP-330
Canon SELPHY CP400
Canon SELPHY CP500, CP510, CP520, CP530
Canon SELPHY CP600, CP710, CP720, CP730, CP740, CP750, CP760, CP770, CP780, CP790
Canon SELPHY CP800
Canon SELPHY CP810
Canon SELPHY CP820
Canon SELPHY CP900
Canon SELPHY CP910
Canon SELPHY CP1000
S series
Canon S100
Canon S200
Canon S300, S330, S400, S450, S4500, S500, S520, S530D, S600, S630, S750, S800, S820, S820D, S830D, S900, S9000

Хобби

Опубликовано:

30 янв 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 284

@BocaBill86 Год назад

Thanks for the tutorial. My takeaway was that you can really get it all wet and it will still work. I replaced my 2 ink cartridges and nada, so while I was shopping for a new print head, I came across this video and it allowed me to experiment. I ran it under warm water from both side and saw the ink and various "clots" coming out of the print head. Kept it up for about 5-10 minutes, then blew off the excess water, let it sit for a while to dry, put it back in with fresh ink and viola'. Worked like a charm. Thanks for saving me $45 for a new print head.

@craiglawrance5342 Год назад

So helpful thanks- you have to see someone do this to understand how to remove the print head . No amount of manuals could ever illustrate it as well as this guy. Top man!

@GuidedPrayers 3 года назад

THANK YOU! You help fix my Canon Pixma 9000 that would act like its printing but not output any ink. I microwaved a dish of DISTILLED water to a boil with 1/2 tsp of dish soap and soaked for 20 minutes. Then I used a dollar store plastic ketchup bottle and placed the tip over the ink wells and pushed pressurized distilled water through them. It never made a stream like your video but had a nice flow of water droplets bleed through the print head (like dew on a rose pedal). Dried it with a lint free towel, installed it, and now works like a new! Thanks again! GOD bless you!

@e11world Год назад

I tried this last week and wanted to thank you for this. You saved me from having to buy another printer. I dipped the printhead in boiling water multiple times and opened the hot water on just a bit to get it to fall as wide as a straw to clean each color and after 30-40 minutes it was all back to normal.

@TBNTX 3 года назад

Good video. I appreciate it. I'd like to suggest one last step before drying the printhead. Rinse it in distilled water. Tap water contains a lot of dissolved minerals that will calcify when water dries away. By rinsing it with distilled water those contaminants will be removed.

@303electronics 3 года назад

Thank you very much for the suggestion. I think you are right about rinsing with distilled water.. Have a great day!

@katieroehrich8199 3 года назад

You saved my sanity today! Three trips to Target and 10 hours to get this dumb thing sorted. Thank you!

@marcusniessen7793 3 года назад

Many thanks for your video. It gave me confidence to apply a lot more warm water and soaking time to fully clean a very clogged print head (extended storage). The yellow nozzles had a thick carpet of spikes and the black nozzles were just a ribbon of black. Printer just gave a B200 error on startup attempts. After a day of cleaning and soaking the water finally stayed clean. I reinstalled the print head and fresh ink. It needed the reset procedure of leaving the cover open until the head moved left (to clear the B200 error). First print test was perfect and it has been working well since the cleaning. Thank you.

@lovswr 5 лет назад

This worked for me! I have a 6-year old Canon MX922. I was away from home & ended up buying an Canon TS6220. One day after I got back I had the dreaded B200 error on the MX922. Followed your instructions & at first it did not work. Then the next day I had the bright idea of taking the print head out of the 4-day old TS6220. Well when I turned on the MX922 to get the print head to move so I could take it out, the B200 error was gone. I put a fan on it after I took it out of the cleaning solution, but I guess it was not totally dry. Kudos & thanks.

@tweegerm 2 года назад

thank you, these videos are more helpful than anything canon itself puts out!

@bigredzphilly4558 5 лет назад

Thank you so much!!! It worked for my MX882 which kept showing the B200 error msg.. after following your steps it seems to be working perfectly. Test page, regularly printing and all. More importantly, that error isn't popping up, even after printing👍👍👏👏 BRAVO SIR AND THX AGAIN!!

@yuinzeuton9712 5 лет назад

Thank you so much for making this VDO, it’s helped a lot. We are using off market inks also, first we thought the inks were bad. I was going to test all the ink that we have to see which one is bad but it is printing out the correct color again now 😊👍

@phoenicianinsomniac 5 лет назад

Thank you so, so much for this! My Canon MX922 stopped printing just black ink (colors worked fine) a few weeks ago. No error message, no indication of what was wrong with it, just no black ink being printed despite brand new cartridges being in there. I followed this tutorial/walk through and I'm delighted that it worked!!!

@oceaneco1 5 лет назад

Mine did the same exact thing! I was ready to buy a new one and then I found this video!! So thankful for some really smart people on youtube that take the time to share their knowledge!! Thank you 303 Electronics!!

@mrs.jackson270 3 года назад

I want to thank you so much for this! I had one page ONE PAGE left to print lol and got the 200 error. Cleaning the printhead worked like a charm! I

@olddanb1 Год назад

Couldn't believe it was going back in without a night to dry out in a warm place. I shook the water off hard, and put it straight back in. Remember. It already was printing badly! So I wasn't going to loose out. Major result. Perfect printing again. Excellent. Thank you.

@jamesmcguire7417 4 года назад

Between this video and the removal of the head video, you saved my printer. Thank you for some very simple and direct instruction. MX922

@303electronics 4 года назад

Great! Thanks for sharing! Glad I could help!

@sarahashley13 Год назад

Thank you so much for this video! I did not want to buy a new printer and all the automatic 'cleaning' options were not doing the trick. You literally saved me time and money!

@303electronics Год назад

That was the plan. Thanks for the feedback. I'm glad you fixed it. Have a great weekend!

@SlightlyMadC 3 года назад

I'd like to thank you a lot for this DIY. It helps myself !

@1888scanvan 4 года назад

The "squirt" method worked perfectly with my Canon Pro-100. The M and Y channels were completely clogged and this solved the problem after the first try. Thanks!

@303electronics 4 года назад

I'm happy for your success! I know that feeling! 🙂🙂🙂. Great printer you have!

@MC-yz5mh 2 года назад

Yay! This solution finally worked for me. I had just printed over 400 pages and then it started printing blank pages. Tried all the cleaning and wasted so much ink and still blank pages. I used a little dish liquid and water in a bowl and shook the printhead and did it several times until the water was clear. I ended the final rinse with distilled water as TBNTX suggested, dried it off and the nozzle head print sheet printed!! I will use this as a regular maintenance item.

@303electronics 2 года назад

I'm glad you got it fixed! Thank you very much for sharing. Have a great day!

@user-lf4td9xr4v 3 года назад

It worked. Thank you thank you thank you! Initially I replaced all the ink tanks, didn't work. Then I used cotton swabs dipped in alcohol to clean the printhead, didn't work. Repeated the alcohol trick several times, still no luck. I didn't want to throw the printer out cause I have a lot of ink cartridges......but this worked. I'm printing again!

@syuanrong 4 года назад

worked like a charm! thanks!

@elizabethhobbs1870 5 лет назад

Very good video - easily understood, etc. Thanks

@rubenspersone 3 года назад

I bought a great printer from canon in 2019 for $63. And after the original canon cartridges ran out I bought generic ones. Whiting a month my printer started having issues where the PGBK ink wouldn't come out, just the colors. I called canon a few times. Tried all the different test I could do over the phone with one of their technicians. Until the guy told me my printer couldn't get fixed and I had to discard it and buy a new one. Hence my printer is now is $300 because of the pandemic. But then I came acros your video. And it saved my printer. THANK YOU!!!! I don't have a tube like yours so I used my water pick. And now it's working beautifully. Except that the printer's screen is saying that my one week old cartridges are very low. almost ending. But thats fine. Thanks again.

@303electronics 2 года назад

Thank you very much for sharing! Have a great weekend!

@AJayMustang 2 года назад

Thank you this worked. I ended up having a tube like yours and kinda used my hand to hold the other end over my regular faucet tightly and it was enough pressure to fix it!

@yandenuts 3 года назад

Thanks mate. Saved my printer and now I can pass on the knowledge you passed onto me.

@303electronics 3 года назад

Thank you. Glad I could help. Have a great weekend!

@queenc8280 3 года назад

OMG, YOU SAVED ME!! NONE OF THE OTHER RU-vid VIDEOS WERE HELPFUL BUT YOURS!!!!!!! I FOLLOWED YOUR COMPLETE INSTRUCTIONS!!!!!!! THANK YOU SIR!!!!!!!! 💙

@303electronics 3 года назад

Thanks for the feedback. I'm glad i could help. Have a great day!

@queenc8280 3 года назад

@@303electronics I almost gave up until I saw your video. Amazing!! You're so awesome!!!! Have a great day also. Thank you again immensely!

@uranus1937 4 года назад

VerY helpful and thank you a lot!

@123Ingles 3 года назад

Dude, you are the best, I bought a second-hand one and yellow didn't come up, but I followed your recommendations and now it works perfectly. You are the best

@303electronics 3 года назад

Hey! Thanks for the feedback. I'm glad you got it working properly. Have a great weekend!

@marvelousmartian5379 Год назад

THANK YOU for a very detailed and step by step instruction!!!

@303electronics Год назад

Thanks for the feedback. Have a great day!

@TheSupefan Год назад

Thank you so much for posting! I have restored my print head and printing color again!

@REDWORKSCINEMA 4 года назад

I appreciate people making tutorials and hot to fix it videos on youtube. I follow them quite often and most of the time are quite helpful. Unfortunately I followed your directions to a T and it destroyed my print head. I have a Canon IP6700D. Prior to watching this video I followed another video which suggested GENTLY pouring distilled water from a spoon onto the nozzels. I followed that and it worked pretty well. However there were still some dead lines in the magenta. VERY FEW LINES after printing a test pattern. But it was FAR better than before. So I then tried this approach you detailed in the video, (I got a faucet attachment and clear hose) watched your video TWICE to make sure I did it properly and cleaned it until no more ink ran through. I don't think I used any more water pressure that what you demonstrated. I made special note of that, for you said too much could destroy the print head. Then I let it dry overnight. I put the printer back together, installed brand new ink and printed a test pattern...and pretty much EVERY LINE IS BAD! Its beyond BAD. Its a total NIGHTMARE. Far worse than any of my initial issues with the clogged heads. Needless to say I couldn't use the printer for my intended purpose today to meet a deadline and print an important label. I think I'm going to have to replace the print head. This might also be my first ever response to a youtube video (after using youtube for some 16 years). So beware, this hose approach seems very unpredictable in terms of destroying a print head, especially for someone without much experience. (I'm a pretty technically savy person too.) So I would encourage anybody to try a gentler approach (or approaches) first.

@RavenVargas27 Год назад

Ah watching those clogs getting washed away is so satisfying thanks this helps a lot

@jillbinion2774 2 года назад

Thank you so much for this video and your other one about why a printer isn't printing one color! Have tried everything to fix my printer and this is the only thing that fixed it. I was about to take it to a repair shop or get a new printer.

@303electronics 2 года назад

Thank you for your comment. I'm glad you got your printer fixed with the help of our videos. Have a great day!

@oana1111 4 года назад

Thank you so much, I had no idea I could clean them. I had two colours blocked after not having used it in a long time. This worked perfectly. I used dishwashing liquid and rinsed it very well, under very warm water. Didn't have a tube but the medium water pressure on both sides of the device cleaned very well. I needed to deep clean a few times too on the printer.

@KatherineTOwen 2 года назад

useful to know you used washing up liquid. Thank you

@johnkelliher4292 4 года назад

Just done this and it worked out perfect, self cleaning by printer would not do it so thanks for this video

@phyllispage5486 3 года назад

Thank you very much for this tutorial.

@MilouTintin 2 года назад

THANK YOU thank you thank you! Here I thought I was going to have to buy a new printer. The only tricky part was getting the print head out and back again. But a little finesse turned the trick. I soaked my head (people have been suggesting I do that for years!) and then used the faucet flow to flush out the ink channels. My Pixma MX922 is happy now, thanks to you.

@303electronics 2 года назад

That's great to hear! Thank you very much for sharing! Have a great day!

@suzm5925 2 года назад

Thank you so much for your videos, I was just about to buy a new printer. Printer is perfect now after following your instructions on how to take it out and clean it.

@303electronics 2 года назад

I'm glad you found videos helpful. Thank you so much! Have a great day!

@marymary-bk7so 3 года назад

Excellent video, thank you!

@kensavage5908 4 года назад

Thank you.... This saves me from buying a new printer... thanks again!

@303electronics 4 года назад

You're welcome! Thanks for the feedback!

@RAPTOR8ASDF 2 года назад

Thanks for this video. My TS9020 printer was missing the yellow and BK bands in the nozzle check pattern. Tried the windex and paper towel method and then soaking in warm distilled water and even blowing on the cartridge inlets to the printhead using a tubing. No difference. ..... Then with nothing to lose I tried your method. It worked beautifully and the nozzle check pattern is 100% good. ... Thanks again.

@303electronics 2 года назад

I'm glad you tried it and got it fixed! Thank you very much for sharing! Have a great day!

@MichaelJohnson-ux7pe 4 года назад

Nice video I'll have to give this a try, our canon is leaving black ink streaks on cards and envelopes. I hope this fixes the problem.

@303electronics 4 года назад

Another good solution for cleaning printheads is LA's totally Awesome" brand cleaner from dollar tree or dollar general.

@daveidmarx8296 5 лет назад

This is an awesome video! Not an ink-related question, but my Pixma MX-922 has stopped feeding paper from the lower tray. I've cleaned the rollers with alcohol, but it seems like the bottom rollers no longer spin to feed the paper into the printer. Any ideas on what I could do? I'd love to buy another 922, but Canon in their infinite wisdom no longer sells them.

@imdanrichards 3 года назад

Thank you! This worked beautifully!

@303electronics 3 года назад

Awesome! Thanks for the feedback! Have a great day!

@jeepman012 5 лет назад

Great Job.Thank You.

@HildaVillalta Год назад

Thank you, I was struggling to put it back after cleaning

@phoebenichole 3 года назад

OMG you just saved me money I just bought brother printer today because i thought my canon mx922 was done but now I cleaned up the clog it's been clogged for 3 yrs a lot of colors still coming out so I am soaking it now with warm water over night still releasing lots of color residual. I am going to return the brother printer i bought because i dont need it anymore thanks to you!!

@303electronics 3 года назад

That's great! Thank you for sharing. Have a great day!

@phoebenichole 3 года назад

@@303electronics yea after the initial unclogging the one u showed on the video the color went back to good quality and i print 5 pages of 8x10 photo and it went back to clogging again so now i am soaking it over night still coming out lots of color residuals. The head has not been clean for 3yrs so it's been clogged a lot.

@WildwoodFilm 5 лет назад

Thank you for your help!

@goforbroke2 4 года назад

This fixed my b200 error code on my Canon MG7120. My printer is 6 or 7 years old and I have never cleaned the printhead..... I always thought my issues were not using the authentic Canon print cartridges, but maybe my machine needed a little TLC. Thanks!

@eddy11tsang24 3 года назад

Thanks for the good video. I wish I know this much earlier. I bought another a new Canon 892 after my 870 failed on me. I also threw away my daughter's 892 since she did not use for a while. I will keep this in mind.

@303electronics 3 года назад

Thank you! Have a great day!

@mrtango5003 3 года назад

I used paint remover and worked perfectly Thanks man

@303electronics 2 года назад

Great to hear! I hope it wasn't too harsh of a chemical, but thank you for sharing!

@baletashakur 4 года назад

Thanks for the video. What brand of ink do you recommend?

@charliee0319 4 года назад

You saved my life! Thank you so much!!!!

@katieroehrich8199 3 года назад

I felt this. I was losing my dang mind today.

@areejabdiprintmaker-artist Год назад

Thank you so much. A life saver 😊

@alinalin5173 Год назад

thank you very much

@wallacewong7496 2 года назад

wow. this fixed my problem. Thanks so much!

@303electronics 2 года назад

I'm glad it worked! Thank you very much for your feedback! Have a great weekend!

@wallacelawson9027 Год назад

Very helpful, thanks man.......

@LittlestSweetShop 4 года назад

Hi! I've washed the print head - seems to work (previously the print was a bit smudged and not with bright colours). However the black is still causing issues. Any idea how I can fix this? Can I use iso alcohol to clean the heads instead of water? Cheer!

@kathrynburroughs1484 Год назад

So happy with the results. My colors are a little worse than before, but I expect that's from water dilution. But I had nothing from the large black and now it's totally good! Also, I did forget about how much I struggled with getting the print head out. The video helped me get it out easier than the first time.

@303electronics Год назад

That's great! Thank you for sharing. Have a great weekend!

@JDRobertson 5 лет назад

Great video thank you! Question - What happens if the ink pads collect too much ink over time like you mentioned? Can those also be cleaned? Thanks again

@mikew1778 Год назад

Thanks for the help. Very informative. I cleaned the print head on my Canon MG6620, but I'm not getting even printing. I liked the part where you inspect the flow, I am going to go back and do it again paying more attention.

@303electronics Год назад

Glad it helped

@stevegeiger2193 3 года назад

Where did you get the spigot adaptor, is it something I might find at Hardware? What kind of "cleaning solution" are you using? Looks like Simple Green or would common dishwashing liquid work?

@OmegaMan28 4 года назад

I don't see Canon Pro-2000 on the list, will this solution works?

@jubileesisters9711 5 лет назад

It was okay to get the metal contact strip wet?

@waqassaeed3838 3 года назад

Thank you for your help. God bless you

@303electronics 3 года назад

My pleasure! God bless you as well!!!

@scottf9044 2 года назад

Nice video. Thanks. My 5520 won't print black text. I followed your vide and still have the same problem. On the test page it's not printing anything from the PGBK cartridge. I have not tried a new cartridge (I'd rather not purchase one if that cartridge is not the problem). Thoughts? Does it sound like a printhead problem or a cartridge problem? I've done deep cleaning with no change in results. I did NOT do a cleaning after removing and cleaning the inkhead.

@rojosub 3 года назад

Thanks a lot for this video

@303electronics 3 года назад

You're welcome! Have a great day!

@meadowmorph3291 2 года назад

interesting video. I have one question ... what do you use for "cleaning solution"?

@zZiL341yRj736 3 года назад

My PGBK parts is smeared and blur in the middle section? Do you know how to fix this.

@hawklinemonster5064 3 года назад

Thank you!! It worked!!!

@303electronics 3 года назад

Great! Congrats on the success! Thanknyou for sharing!

@alfredkyo 3 года назад

Sir May I ask. My colored cartridge releases ink when Im wiping the nozzle but during printing, it doesn't show any ink at all even when doing deep cleaning multiple times, and only the black cartridge works. What do you think seems to be the problem. Thank you :)

@ianide2480 4 года назад

Thanks for this bud, just finished cleaning and I am now letting the print head dry inside the enclosure of my 3D printer. It's about 60C in there so it should dry it out nicely while this print is going. I'll report back later for my results.

@MYRNITAX 4 года назад

How did you go with this solution? it works?

@ianide2480 4 года назад

@@MYRNITAX This seems to have worked like a charm. I did make a small change from the exact process. I first used lighter fluid (naptha) to break up some of the clogged ink, I just got it into the nozzles as best as I could. Then I soaked the whole thing in a manner similar to what is shown here, using hot water with a splash of Windex. Then I used some spare rubber line from my fish tank to gently force water through the jets. Let it dry at 60c for about an hour and prints are nice n crisp once again.

@MYRNITAX 4 года назад

@@ianide2480 thank you so much for your answer

@ssx7 3 года назад

it's work for canon maxify mb2120 and what liquid I used ??

@lydiatjerks-dalenberg1426 3 года назад

Thank you so mutch, I dit it !!!

@lucasguardiolat 3 года назад

thank you

@303electronics 2 года назад

You're welcome

@CORPSE77 2 года назад

My MX922 keeps printing double lines at the PGBK grid lines section during the nozzles check print... any idea what is wrong pls? I did the cleaning as you did in this video (thank you btw for this awesome instruction and easy to follow tutorial), I ran the test after cleaning, and the same issue happened again

@chestermicek Год назад

Good.

@kevintwitchett5804 3 года назад

Is it possible to swap a regional print head with another region, I have a MG7540 form the UAE but now live in Spain, can't get the ink here.

@thliaw 4 года назад

Will the cleaning clear B200 error?

@ashoksah7171 Год назад

It’s like you live in Uzbekistan around 1994, when you have very old looking US$ you just wash with detergent, iron them and good to go!😀😀👍🏻

@sergioramon7217 3 года назад

Thank you so much :-)

@303electronics 3 года назад

You're welcome. Thanks for the feedback!

@spacedrivefilms 3 года назад

? What if I have done all that and the PBGK still does not print? Do I need a new head

@Imaginativeone_DF Год назад

Where do I get the faucet cap that's attached to the sink-faucet?

@marko176schneider5 3 года назад

Super Video.Danke! ❤👍

@303electronics 3 года назад

You're welcome! Thanks for the feedback! Have a great day!

@marko176schneider5 3 года назад

@@303electronics Super

@robertlee1549 3 года назад

What size tubing should I get?

@oldfart83 5 лет назад

Thank you. Will remove head today. Others had mention to be careful not to get the electric contact plate wet. Is this important or not. Thanks again

@Techno-Charge 3 года назад

Good question, I want to know the same thing? Did you try?

@queenc8280 3 года назад

I've gotten it wet, and it is impossible not to get it wet. I had to submerge mine gently. Just ensure it is dry. Mine is working like a charm and I wet it a 2x already

@3dcsheldon 3 года назад

If one color stops printing but the cartridge is still half full, does that mean the print head dead for that color ? I tried your cleaning method and also also preformed a deep clean test on the head. Still nothing for that one color.

@AntoninoArconte 4 года назад

Thank you very much.

@303electronics 4 года назад

You're welcome! Have a great weekend!

@AntoninoArconte 4 года назад

@@303electronics I had that B200 problem with my Canon Pixma MX920 and thanks to your video I solved it easily. It was all stained with ink, a nice clean and it seems to be working fine. No, I don't use Chinese cartridges. I refill the same cartridges with canon ink. It would cost too much to change with the original canons and never reloading them. Hello

@Diddldance 5 лет назад

Why did you not remove the screws on the back of the print head to clean the nozzles more gently?? It's so easy to do!!

@jps99 3 года назад

Thanks for the video! Do you think cleaning it in an ultrasonic cleaner would work for a really clogged head? I've flushed the blue printer nozzle on my WF-2760 printer several times with Windex, but it still prints an extremely faint amount.

@303electronics 3 года назад

Hi. Try priming ink or water through the nozzle to remove air bubbles. The color will be faint at first, but then will be more vivid as the ink primes through. Ultrasonic may damage the nozzles actually, so I do not recommend that. If that is your last resort, try it and let us know how that worked.

@beedee9534 3 года назад

Clean it ran test page the blue was after market does not show have to get a cay an the yellow was after market it works fine will this effect the print coming up pink

@lacyron 3 года назад

Question about what you are using for cleaning fluid. I see it is green in color, are you using Simple Green? THANKS, great video. I watched another video but they were not as clear about removing the printhead as you were! I was afraid to go by the other video, since it was not very clear on HOW TO remove and replace the printhead? but yours is clear enough I am confident I would NOT mess something up. >>> THANKS for you reply

@303electronics 2 года назад

Hi. thank you very much! No, I do not use simple green, though it may be not a bad option. I'll try it and see. I use a window cleaning solution like windex and add ammonia about 10% of the solution.

@bpwoodrow 4 года назад

Thanks. Great video! I have Canon MX722. Would love to replicate what you did to clean heads, since I've never cleaned mine and have printed 12,951+ pgs. I too use generic ink (great savings). I ran deep cleaning today - super psyched. The model in your video seems to swivel up for access to print head, MX722 doesn't do that. Any referrals or tips on how to access MX722 heads is appreciated. By the way, thanks, you just saved me several hundred dollars, as I was looking to replace my printer.

@bpwoodrow 4 года назад

Thanks I found the answer on another of your videos. Great. Thanks!!

@misterK07 2 года назад

hello. In my particular case, I have used these techniques for many years. I have been a member of the defunct Epsonian forum and nowadays I uncover head injectors with running water without problems. all those who only speak for what they read and have not dared the challenge of experimenting -there is the work of a professional, not to stay with what is read or the theory but of the challenge, to go further ...- there is heads nowadays that no longer allow these tactics, such as the epson L series heads, as a contribution to this good tutorial, it only remains for me to say that the results obtained with ammonia before washing with running water are amazing, isopropyl alcohol a sometimes the results are worse. Given the type of head this technique of the hose and the tap of running water does not fit its use for Epson heads so to a lesser extent it would come to do almost the same. I immerse it in the ultrasound tray and use different trays, ultrasound times and different compositions, depending on the complexity of the obstruction, all for home use. As you can see here-what is not seen in the video is the drying technique after so much water-only for copyright, it is not shown but I know very well how it does it because I also use my own technique to dry that not It brings any kind of inconveniences like they want to do to see claiming that minerals etc etc etc. Even the lenses of laser units such as cdrom, dvd rom I have put them under water but whoever wants to believe or not is only a matter of challenges based on experience. very good video. My greetings from Mar del Plata Argentina.-

@303electronics 2 года назад

Thank you very much for the information and feedback! Have a great weekend!

@digitalcyclopsvideoproduct867 3 года назад

How about soaking the whole print head in isopropyl alcohol overnight?

@TheSaltfly 3 года назад

Where can I get that red nozzle for the tubing that you have on your faucet?

@303electronics 3 года назад

I got it at Walmart in the aquarium supplies section. Costs around $2

@wattersgoddess 4 месяца назад

Wonderful! REQUEST - Can you do a video on manually cleaning a Canon Refillable printer? (e.g. Canon Maxify GX7020)

@303electronics 4 месяца назад

I will try as soon as I get my hands on one! Thanks for your suggestion and feedback.

@jesseskellington9427 3 года назад

Do you mean the "LA Totally Awesome" window cleaner with ammonia or a different cleaner by them? I see above you say (Windex+Ammonia) and this has both :-)

@jaxx2963 2 года назад

If you press the stop button for a few seconds it will automatically move the print head into the replacement position

@isobelmunoffilm5694 Год назад

Thank you. Got B200 error code on PIXMA MX920. This gives me the confidence to try cleaning the printhead myself. What do you use for a cleaning solution?

@isobelmunoffilm5694 Год назад

I see in the comments below you state Windex with 10% ammonia added.

@303electronics Год назад

Yes. Good luck. Thanks for watching. I hope you can get fixed. Have a great day!