Тёмный
No video :(

How to Clean DTF Printhead: ET-8550 & Other Printers (Clear DTF Clogs) 

Hangry Muscle
Подписаться 9 тыс.
Просмотров 2,3 тыс.
50% 1

Welcome to Hangry Muscle! In this video, I share my tried-and-true method for cleaning DTF printheads, specifically using the ET-8550 printer. This method is effective for most DTF printers and has worked flawlessly for me over the past few years. Best of all, it's the safest way to clean your printhead without removing it, minimizing the risk of damage.
🛠️ What You'll Learn:
How to identify a clogged printhead
The safest method to clean the printhead without removal
Step-by-step instructions to clear stubborn clogs
Tips for maintaining a clean printhead and preventing future clogs
Why This Method?
Over the years, I’ve perfected this technique to ensure it’s both effective and safe. By avoiding printhead removal, you significantly reduce the risk of damaging your printhead, saving you time and money.
0:00 Intro
0:43 DTF White Ink not working
0:53 Unlock Printhead
1:05 Wetcap DTF Printhead
1:35 Remove Ink Lines
2:46 Drain ET-8550 Dampers
3:01 Remove ET-8550 Dampers
3:40 Printhead Manifold
4:53 How to Clean ET-8550 Dampers
5:23 How to Clean Printhead Manifold
6:30 Replace ET-8550 Damper
7:32 Screw in Dampers
7:42 Replace Ink Lines
8:10 Clean Printer
8:27 ShoeShine Printhead
8:39 Replace Maintenance Box
9:03 Power Clean (Prime Printhead)
10:21 Printhead Nozzle Check
10:45 Outro
📘 Preorder Now: Hangry's ET-8550 DTF Cheat Sheet
Exciting news! My new eBook, "Hangry's ET-8550 DTF Cheat Sheet," is now available for preorder. This comprehensive guide includes:
Detailed tutorials like this one to help you maintain your printer
Troubleshooting tips for common issues
Best practices for using and maintaining your converted DTF printer
Exclusive tips and tricks to ensure you get the best results every time
Preorder your copy now and be the first to get access to all the information you need to succeed with your ET-8550 DTF printer!
🔗 Preorder Here: hangrymuscle.c...
#stayhangry
#dtftransfers #howtoprintdtf #dtfprinter #epsonet8550 #epsonxp15000
All DTF Supplies:
Use Code: Hangry
For a discount.
DTF Ink (CMYKW): dtgpro.com/cic...
DTF Film A3+ (13x19): dtgpro.com/cic...
DTF Powder: dtgpro.com/cic...
Rip Software:
dtgpro.com/cic...
🔔 Subscribe for More Tips and Tutorials:
Don't forget to subscribe to my channel and hit the notification bell so you never miss a video. If you found this tutorial helpful, give it a thumbs up and share it with others who might benefit from it.
Follow Hangry Muscle:
(Only) Website: hangrymuscle.com
Instagram: @HangryMuscle
Facebook: Hangry Muscle
Tiktok: HangryMuscle
Support the Channel:
If you'd like to support my work, consider buying me a protein shake!
Cashapp: zachwill949
Venmo: HangryMuscle
Thank you for watching, and happy printing!
FULL DISCLAIMER: I make a small commission on my affiliate links

Опубликовано:

 

15 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 23   
@tamcushknow319
@tamcushknow319 21 день назад
I just converted this new printer 8550 and the black will not print, but it seemed to print the black when I do the nozzle check. Should I follow the step above?
@izzymacc
@izzymacc Месяц назад
Appreciate the video glad I followed you
@HangryMuscle
@HangryMuscle Месяц назад
Happy to help 💪🏾
@banhbaosogood
@banhbaosogood 27 дней назад
I took out my dampers and cleaned them all, but after a run a powerclean, none of the ink is going into any of my dampers, any suggestions? I pull ink through each of the tubes to check if there’s a clogs in my hoses but everything is good, just can’t get the ink back into my dampers for some reason..
@aieshafoster9910
@aieshafoster9910 Месяц назад
What cleaning solution u use
@HangryMuscle
@HangryMuscle Месяц назад
Ammonia mainly ru-vid.comILKq9PmjZpo?feature=share
@bugginfelix
@bugginfelix 11 дней назад
Hey I took off my travel lock but now it thinks it’s in travel mode with the lock on how do I bypass that?
@HangryMuscle
@HangryMuscle 11 дней назад
I have mine completely removed, so i never run into this issue. Without troubleshooting I'm not sure.
@bugginfelix
@bugginfelix 11 дней назад
@@HangryMuscle I went back and noticed that because I removed all of the parts that there was a gap where the screw wasn’t seated all the way down so I torqued them down so that they were seated flush with the plastic and it’s working now.
@myishaboykins6155
@myishaboykins6155 Месяц назад
How do u clean the print head once it’s removed
@HangryMuscle
@HangryMuscle Месяц назад
The printhead ""DOES NOT"" need to be removed to be cleaned, using this method.
@mariawalberer6239
@mariawalberer6239 День назад
Disappointed that I supported your business. You delete my comment and ignore my questions. Remove me from group with no explanation when you have one rule and i did not break it. Helpful group I was using to learn DTF. Not sure why you can't have the decency to respond to me or let me know why I was removed and blocked from the group.
@rodriguezpierre6968
@rodriguezpierre6968 Месяц назад
I wish I would have seen this before I got error code
@thaoddones6422
@thaoddones6422 Месяц назад
Man.. where do you stay.. looks like I need this done on my printer as well 😪
@HangryMuscle
@HangryMuscle Месяц назад
I am in Socal. Be on the look out, I will be traveling around for in person sessions & setups
@thaoddones6422
@thaoddones6422 Месяц назад
@@HangryMuscle no way.. where in Socal?? Me too and I need help soo bad. I'm in the inland empire area. How much you charge?
@myishaboykins6155
@myishaboykins6155 Месяц назад
How do u clean the printhead
@HangryMuscle
@HangryMuscle Месяц назад
It's shown in the video
@bugginfelix
@bugginfelix 11 дней назад
@@HangryMusclethe video only shows the tanks being cleaned and the top of the print head. What about the rest of the lower parts? Do they need service like this somehow?
@HangryMuscle
@HangryMuscle 11 дней назад
There is no need to remove the fucking printhead because "wetcapping" breaks down the ink residue in and underneath the printhead. I've explained this multiple times
@bugginfelix
@bugginfelix 11 дней назад
@@HangryMuscle I started this extra cleaning because my whites weren’t printing at all so I did everything in the vid but neither of my whites are working still
@JasmineHawkins-l9t
@JasmineHawkins-l9t Месяц назад
I need need your help
@HangryMuscle
@HangryMuscle Месяц назад
Sure I have tech support available hangrymuscle.com/collections/one-on-one-support-calls
Далее
Filament vs Pellet 3D Printing | Which is the Future?
22:17
Most Ignored DTF Printer Maintenance Tips
8:36
Просмотров 2,2 тыс.
ET-8550 Printhead Teardown
16:15
Просмотров 7 тыс.
Epson Eco-Tank ET-8550: Remove the printhead (How To)
20:11