How to clean dust from diecast model cars

Подписаться 5 тыс.

Просмотров 39 тыс.

50% 1

Ring the 🔔 to join the notification squad!
In this video I want to give you a few tips on how to prevent dust from getting in the way of your diecast car collection's awesomeness.
- If you don't have a display with glass panels, keep your cars in their boxes (also ensures resale value)
- Use microfibre cloth
- Use a soft bristled makeup brush to get dust off fine details like the windshield lining or perforated grilles etc.
- Use water to damp your microfibre cloth to wipe dried stains of water or oil
- Avoid isopropyl alcohol if you can, and NEVER use it on plastic body panels or near sun strips or the frit surrounding the windshields
- A good way of cleaning dusty interiors (especially of convertibles) is to use a can of compressed air. Otherwise, the aforementioned makeup brush or a q tip surrounded by microfibre cloth can get into places too small for your finger
- In any case, blowing always helps get rid of coarse dust particles quickly.
Hope these tips help you keep your diecast car collection neat and tidy!
CREDITS:
music: 30 Minutes of Beautiful Romantic Music Guitar Music Piano Music Relaxing Music ★73
channel intro: • FREE Intro Template #1... , • Drag Race Intro #27 So...
Filmed on a Samsung Galaxy Note 3
Edited with Wondershare Video Editor

Авто/Мото

Опубликовано:

18 апр 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 105

@JxT1957 3 года назад

i have diecast models that have been sitting for over 10 years on display and just found out a good way to get the stuck on dust out of the interior (Q-tip or paint brush didnt work) is by using a wet toothbrush and scrubbing the seats and dash. They look like brand new again.

@Santoshlv426 3 года назад

@@ImperialDiecast Won't a toohbrush be too hard for the small plastic.

@tomweyts 3 года назад

I use make up brushes to clean my collection Every few weeks , and a swiffer Duster

@Thunder_CR7777 Месяц назад

10 years💀😭

@toxicnoise4379 3 года назад

Cleaning info part actually starts at 7:00

@shazbot7192 2 года назад

I'll save you all the trouble. Blow the dust off it, then wipe it off with a soft cloth. 2.3 seconds, 19 minute video not required. You are welcome.

@JamesBond-gf6lt 4 года назад

Reducing the amount of dust in the room is most important. I have my 300, 1/18 diecast in my den, a smaller room. They are all on open shelving. A BIG help is to cover (block off) both the supply and return air grilles into that room (surprisingly it is still warm enough in winter) It makes a huge reduction in the amount of dust. I put an auto-closer on the door hinge so it always stays shut, keeping dust out. Using an air purifier in the corner also filters out any dust. Canned air is best to get the bulk of the dust off and finish with fine cloth, as you've done. Fyi....take the model out of the room to blow the dust off, or it will just end up on some other models in the same room. Comment - I don't agree with displaying models inside the box since you can't see all sides, can't open the parts, poor lighting, takes up more space, etc..

@rzarco01 10 месяцев назад

My collection is made up of 1/87 scale Mercedes models, made mostly of plastic but also of resin and metal. I have found the make up brush to be invaluable in removing dust without detaching the freestanding photoetched hood ornaments on many of the cars.

@CptDavis Месяц назад

Thanks man! This is soo helpful

@GK-Modelcar-Universe 5 лет назад

A good topic! Of each collector probably hated. So I hate the dust. I absolutely need dustproof showcases. :)

@ImperialDiecast 5 лет назад

Haha yeah :D I'm going to review some Triple 9 1/18 showcases soon

@timdejong5017 5 лет назад

@@ImperialDiecast i have these no dust get in them www.modelcarworld.de/nl/MCG/202033/Modellauto-Vitrine-6x-Plastic-Vitrine-voor-elk-1-x-1-18.htm

@jesseechavarria1574 3 года назад

Excellent video! Thank you.

@elektrosquad4673 3 года назад

I like how gentle you are to your Model cars

@mckav2358 2 года назад

This was great advice- thanx

@joshuating1155 3 года назад

cool vid. never thought of these methods. I use a wet q tip with a paper towel to clean my cars

@mistered1397 2 года назад

Thank you for your detailed video. I am starting to collect diecast cars again and wanted better ideas on cleaning them. When I was much younger, I never used the care, that you did, and most were played with rather than admiring. I've looked at quite a few videos on this subject, and I personally would rank your information at the top of my list. I plan on photographing each diecast, I collect now to bring out a more realistic look with the collectable or even a toy car. And just a word to parents and mentors to the younger collectors,. teach them now, so they will carry on good care habits for their models to last for years to come.

@nonchals 4 года назад

I did it and its works thanks bro

@gtv6chuck 4 года назад

I generally use Swiffer pads and canned air blasts. The makeup brush technique is an excellent idea.

@overclocker4life 5 лет назад

useful info, thanks

@ironlungs10 3 года назад

Ive used a dry car wash/carnauba wax infused spray with a microfibre towel. worked great as well as put a slick wax finish on it.

@kyleking284 2 года назад

That was very helpful, really good tips Thank you very much👍❤⭐

@yank4334 5 лет назад

very nice and informative..cleaning model cars and other models is a skill in its self. Most people will use a vacuum cleaner or mild detergent or something

@acadm 3 года назад

Thanks for this. I have 69 1:18 scale cars in my collection, and thanks to your tips, I think every day I should clean one using the following steps: 1) Blow on it (using the mouth, not another body part) 2) Use a microfiber cloth for the windshield first, and then the rest of the car 3) Use a soft-bristled brush for those harder to reach areas of the vehicle

@ImperialDiecast 3 года назад

Exactly! And to clean any actual dirt, always try using water dampened cloth first and only if it still doesnt go away, use alcohol-based agents as a last resort as they may damage the paint and definitely will damage matte black areas like the black trim around the windshield.

@moonwalker494 2 года назад

69, nice.

@dart-xgaming3213 4 года назад

Thnx bro i also suffer from this problem of dust i had gone for a trip and i saw my lambo collection it was very dusty

@username_username_5611 5 лет назад

BADASS INTRO MAN

@Mad9977 5 лет назад

nice tips, i am too lazy to clean so i got 2 big glass displays 😎👍 cool video, btw subbed your channel

@tmdiecastreviews4437 5 лет назад

Great video brother!!It makes me want to make a "How to clean your diecast models" video too.Keep up the good work:)

@DiecastAutoshow 3 года назад

Thanks for sharing this video. Cleaning diecast is issue for me before taking video.

@andru2625 2 месяца назад

Compressed air, low pressure, done!

@AB-hs9pw 2 года назад

Hi, can we go with liquid polish for the models?

@xxprocodrinxx6548 5 лет назад

Yo, great video. I've made that mistake, too, to a BMW series 3 Alpine white 1:18 and a Dodge challenger concept 2006 from Maisto. What models do you recommend me buy? (only sedans). Greetings, Codrin from Romania

@ImperialDiecast 5 лет назад

Hi Codrin, regarding sedans, the companies Norev, Paragon and Kyosho have done many in the 60-100 EUR range, especially focusing on Mercedes and BMWs. If you're looking for less expensive ones, Maisto has done the Jaguar S-Type and X-Type, and I've reviewed their Mercedes CLS, Cadillac DeVille DTS and motormax's Chrysler 300C HEMI on my channel. Regards!

@ReadingRetail Год назад

Nope not boring.. market yourself in the asmr world.. we love this stuff 😂

@jercsgn Год назад

Nice

@navidfarhan1456 Год назад

Fiber cloths are the king. I use them to clean all of my valuable collections, never leaves silly scratches but I must say they can't be used for long time and if its plastic body the dust can cause scratch.

@jolly7728 4 года назад

Thanks for taking the time to inspire us to clean our model cars. I'm heading out to buy one or two of the simple "tools" I need to spruce up my die-cast auto collection. Just wondering, did I miss the part on using water?

@ImperialDiecast 4 года назад

Thanks for the comment :) Yeah I mention water somewhere in the middle of the vid, only resort to isopropyl alcohol as a last resort because that stuff easily damages paint especially plastic or matte surfaces.

@jolly7728 4 года назад

@@ImperialDiecast Right, and thanks again. I caught that part. Now, all we need is for someone to invent a die-cast model car "car wash/cleaner"...whatever they decide to call it. Can't wait to see it on the market :)

@ntnghj31 2 года назад

Do you know if using an air hose would be effective

@mikemullay5622 2 месяца назад

I use a soft makeup brush to dust my diecast. Occasionally the ones that don't have flocked interiors get a bath and then are dried with a hair dryer.

@JxT1957 3 года назад

i find cleaning the interior stuck on dust on the seats and dash the hardest by far. i wish they made most diecast cars without open windows to keep the dust out. but then it would be kinda tough to open the doors.

@smart4328 4 года назад

I am using medical cotton wet by glass cleaner is amazing coz cotton is very soft and not make any scratch for paint or other plastic parts ...

@davidbartolo5652 2 года назад

Using a microfiber cloth won't leave scratches on the model, right? I usually use a makeup brush but still am afraid that I might damage it.

@Targoon_Music 4 года назад

while watching this i was cleaning my bbr enzo i have a big ass makeup brush the ones they use to put stuff on the cheeks i think i blow my models first to get rid of the most dust and the go over all of it with the brush

@raoamo8513 3 года назад

Can we use a paint brush instead of makeup brush

@i69withgrandmasfr 10 месяцев назад

Honest question do you know how to clean white walls on model cars

@diecastran9679 3 года назад

you just tell me more than clean a model cars, you tell me a big think to take care of my model cars. i had 1000 more 1:64, 43, 24 and 12 models that isnt easy to clean but i will try it like you do. i think its not just a tutorial, is a way to love our models. thanks from indonesian scale model enthusiast

@LeadFarmer_84 2 года назад

I bought a pack of like 1,000 clothes off Amazon specifically designed for cleaning copier screens. Originally got them for cleaning weapons because they're lint free. But they probably work great for models. Super high quality and safe, but cheap enough to be disposable.

@654Crossman Год назад

That's why I keep my old clothes. I cut them up and use them as shop rags, gun cloths, general rags, and many other things.

@sarthakgoyal6656 5 лет назад

My brother 😎😎.. I wanted to upload more but I am so busy in college and stuff 😔

@ImperialDiecast 5 лет назад

maybe in the holidays :D and good luck with your exams bro

@Santoshlv426 3 года назад

Dusting my cars occupy my Sat mornings. While it forces me to have a good look and appreciate the car, it's a tedious process. I keep mine in boxes - 18, 24 and 43 scales. It's just easier to run a cloth over the box. Also, over years a build up of dust will mean the car needs polishing to bring back the shine.

@ReadingRetail Год назад

I randomly fell upon your vid.. I feel like I can use this method in my husbands collectibles.. can’t use any chemicals to damage the paint

@LadiesMan.217. 3 года назад

What model kit was this. I remember this diecast came disassembled and you had to build it. Got one in yellow when I was 7 or 8, just can’t remember the brand/kit name

@ImperialDiecast 3 года назад

this is a pre-assembled car in 1/18 scale sold by hot wheels. I am not aware of there being model kits in 1/18 scale, most kits I know are in 1/24 scale and made by companies like tamiya, aoshima, fujimi etc. but there are also some maisto "assembly line" kits in 1/24 scale too which do not require any glue or painting, just quick assembly.

@LadiesMan.217. 3 года назад

@@ImperialDiecast ahh they are the maisto assembly kits, thanks for clearing that up. I don’t really know much about model kits haha, but been trying to remember for the longest what kit it was just so I could buy another.

@youknoweverything7643 2 года назад

That's what i do to my 1/24 scale models that wasnt built to high enough of caliber for a case I just walk by and blow on them ciuple times a week and clean them once a week it's not many maybe 4 abd by jist blowing majes it so much easier to clean instead of letting it collect dust. And also by building them you can gwt a very high detailed car with better paintjobs and as much scale detail as you want and alot of times more detail then any expensive diecast out there depends how much work you put into them for 60 bucks and 3 months I have models that are way more detailed and better paint then any other diecast in the 400 to 1000 dollar range but I been building for 10 years since i was a kod takes alot of practice and work but worth it

@sheeplegang7856 4 года назад

Is a hand dremel safe to use with compound to remove swirl marks?

@ImperialDiecast 4 года назад

so far I havent worked with compound yet. My advice is to stay away from tools and just use your fingers, that way you can always "feel" the model underneath and adjust pressure and pace. But try it on your cheapest and most damaged model first before daring to do anything on an expensive one.

@sheeplegang7856 4 года назад

@@ImperialDiecast thanks! I will try it on my cheapo ones first

@ilanasmits6148 4 года назад

do you buy cars from minichamps? i think y oudont buy them there, becouse its very expensive, but good, btw , this vid deserves much more likes dude! amazing video! you helped me out, when i was stuck with nearly a 150 dust cars, i didnt know what to do. thanks man.

@ImperialDiecast 4 года назад

you're welcome, dude. And yes, I do have a few minichamps 1/18s although these days they don't seem to make new models anymore. Their 1/43s are also very nice

@natasastanojevic Год назад

Makeup brushes that I don't use for intended purpose anymore do great work on dusty cars, perk of being girl car collector.

@navidfarhan1456 Год назад

What about isopropyl alcohol and cotton bud and glass of water??

@ImperialDiecast Год назад

only in extreme cases where normal water doesnt get the dirt off, and never over plastic parts.

@navidfarhan1456 Год назад

@@ImperialDiecast Should I soak fiber cloth with water or cotton bud for general case?

@lukamilic 4 года назад

My new Infiniti Q60S is arriving next week and I am already seeing dust on it....

@leonardosepbrian8925 3 года назад

how long do you left your diecast dusty ?

@ImperialDiecast 3 года назад

haha, this was probably more than 8 months. I have all my cars that came without boxes in cases now.

@HELLF1RE 2 года назад

Thanks a lot for the video! I've been meaning to clean my model cars for a while. Just a suggestion, do with this what you will, i think you need to spend less time talking. I was wondering when you'd start. Again just a suggestion🤙🏽

@ThePurpleHarpoon 8 месяцев назад

So..... you can't use a pressure washer?

@BorisAndAmorTV 8 месяцев назад

Video featured: Ken Okuyama designed Ferrari Enzo supercar.

@pliantimpala7858 3 года назад

I only really collect hot wheels but have a few 1/18 one in particular being an extremely rare and very very expensive model that if anything happened to it I'd probably just have to kill myself lol. But thank you for this video, I plan on getting only a couple of 1/18 cars but I'm going all out on them being getting the best of the best, so I want to keep them clean.

@DapitDiecast 3 года назад

Awesome 👍👍👍 tq for sharing....+1like n +1subs...greeting from 🇲🇾🤗

@ImperialDiecast 3 года назад

Thanks for being a part of the channel! :)

@abayamangali 3 года назад

I keep mine in a showcase box, so they are safe from collecting dust and dirt.

@lusciouskollektibles8663 3 года назад

Price and budget in mind, I think the prices these days are simply "demand driven" and no longer reflect the real value of model cars unlike in the early days.

@kemperlennox5209 Год назад

I fell asleep numerous times attempting to watch this...

@tutubopeter Год назад

Could not you just hose the whole car down, and then dry it?

@mxstice9185 3 года назад

How to be a diecast model car collector 1: get a house with a big basement 2: get shelves that can stick to walls and dont break 3: buy diecast cars

@ricksanchezsflask8794 2 года назад

I skipped the first two.

@videoman77365 3 года назад

you can find out how to clean your car at 7:11

@Mr.Gundam7 4 года назад

I just put soap and wash it with water lmaoo

@OnwabaQwabi 3 года назад

Tbh u can just wash it or blow it

@stardacars Год назад

it seems like you too scared to apply any pressure, I have alot diecast I use water other compounds for shine. You can use some polish which is real easy to clean.

@timdejong5017 5 лет назад

and dentist gloves then you don't get fingerprints on them