How To Clean MFLB MAgic Flight Launch Box Best Practice

Просмотров 15 тыс.

% 72

Best Pratices - Just lighty swab the excess buildup on the top layer of the trench before the buildup is to much and it has to go to the other site and mess with the contacts etc. (watch the video I explain it in there)
I have own a few MAgic FLgiths and LOVE Them I have tried all ways to clean it and while the intial results are good if you mess around too much below the trench be prepared to get a new one!! its pretty hard to mess up and you really need to aggresibly poke around below but never the less its not the best way.
The best way is to be proactive abut it and borderline OCD and constantly be brushing away excess buildup excess dust - make sure that between hits even there is nothing stuck to the trench as that could easily couse combustion and build up.
Please subscribe for more related videos! and to fin out in a month how clean this baby is.

Опубликовано:

14 июл 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@xaviergms2225 3 года назад

Hey man thanks you for this video!! I’ve had mine for a year and been cleaning it well. But this was exactly the video I needed! Cheers mate!

@valveman12 6 лет назад

No one is going to do that every time. Well had my MFLB for several months and just brush it out. It works just fine and looks great. Plus I use really dry herb so very little, if any, residue.

@whilmccutchan1345 4 года назад

Didn't really clean mine much for years. Cleaned up super easy and is sparkling again with 10 minutes of elbow grease/70% iso/Q-tips. Maybe cleaning it every time helps with flavor? Flavor seems fine for me though haha.

@jasongenova3626 8 лет назад

dude.. do you really open up your lid and brush between every toke? for me that seems like a big pain just to prevent a possible combustion. So what if it combusts sometimes ? also the risk of braking the screen while cleaning clearly makes cleaning between every toke while high a bad idea for me atleast.

@thewrightstuff183672 8 лет назад

almost!! but i take massive drags every time look here i just uploaded a pic if a perfect example I just did instagram.com/p/BIPfX2TAg0n/ now there next drag the whole bow would combust if I didnt brush that away and see how green the rest is got at least another 8-12 tokes.... but again this is JUST youtube and just my opinion :-) im a bit OCD with the mflb for some reason and find keeping it as clean as possible keeps it hitting like new and thats the idea here. Its not like the Mighty or the Arizer or ANY other vape you just turn on and go and then chuck the mouth pieces in alcohol and your good.. this needs CONSTANT attention becuase you can cros that combustion line very easily but sometimes i dont want to - and most others dont as well EVER - but the combustion or borderline combustion when i want it is why i love the MFLB so much. Thans for your feedbck Jason really apreciate it! also i should add i normally just hit the mighty at like 366 F in the mornings and wait utill later int he day for the mflb to kick my ass! lol

@101percentdope 7 лет назад

I just try to shake it after every toke or two, and check for some stuck to the bottom, I rather use a kief scooper and just dash everything once. Using the brush would mean you would have to move all the stuff to one side, then carefully brush it. Takes like an extra 10 seconds, every time. 6 tokes and you waste a good minute.

@kr639 4 года назад

I was laughing too😂😂

@FreakingPikaChuuu 8 лет назад

I've found that if you heat it up a bit first you can brush the buildup near the rails right off, no alcohol needed

@thewrightstuff183672 8 лет назад

Thats awesome. But I will need to check myself I never tried to do just that?? What type of a brush? How often? etc etc what are all the details??

@FreakingPikaChuuu 8 лет назад

oh just the brush that comes with it, I rarely iso my box, just brush it out very often and heat and brush the rails whenever I notice any buildup at all, usually comes right off.

@xaviergms2225 3 года назад

@@FreakingPikaChuuu Thank you Old GeeG!! This really worked!! Top man!

@danmurphy4287 7 лет назад

What about cleaning the actual hole where the pipe goes in? I've got buildup there to about the same thickness as the pipe itself, but I don't really wanna stick anything in there. I'm at a loss for what to do

@alal792 3 года назад

@@0ValdeCalebros it's the que tip you use...just avoid ramming it all the way in obviously to damage the screen it's...also do same with air intake hole IF you wish, yet that one usually stays clean for years due to very very little buildup.

@normalfarmer 10 месяцев назад

Go Native.

@jdmk24integra 2 года назад

I love mine

@ciaramsb7265 6 лет назад

how did you take the lid off of the one you had to replace?? I need to replace mine but don't know how to take the lid off!

@alal792 3 года назад

what about the buildup of the harmful chemical residue that over time would come from the laboratory made ISO-propyl? Or even what may be left if you leave too short a time from evaporation of the main substance itself, which surely is toxic to ingest in just about any form I am sure. Just a few questions on the process because I am about to do a cleaning now. Gotta clean it somehows, yet I suspect water MAY be the only real way if we can figure that out. For NOW I will try some 90-99% and your suggestions. Good video compared to the others out there which are also ok.

@alal792 3 года назад

Yes, that thing was filthy. So had to do something. Took 10 Tips, and glad I found a bottle of 99%. It looks nice and clean now. So I have another one, and other devices etc. So I will just wait a day or longer and leave the lid open, etc. in an airy spot.

@normalfarmer 10 месяцев назад

NEVER USE Q-TIPS! Just use the original brush, or a soft toothbrush, otherwise you’ll be smoking cotton fibers.

@martingourlez8794 6 лет назад

You forgot to mention that this is the shit this product: - Battery 1,2V 2400mAh 4 ~ 8hours charge: you crave a battery for a equivalent of canaçon (so personal you have to buy a charger (4slot) and have at least 7 stack in rotation OR buy their power adapter overpriced). - The glass tube quickly and in addition. - The metal screen is welded with lead in particular. - The wood and its varnish also revealing toxic compounds. - The plexiglass cover deteriorates on its underside, the entry opaque and not cleanable. - For the battery to heat up, you have to exert a constant pressure or you call the switch servant gasket but if you fall asleep on it you burn the battery on /! \ Cadmium /! And rosemary. - A difficult temperature to control which implies the rosemary very black out (T ° C> 230) Only advantage: - Cool design