Thank you for sharing your knowledge with us. I Like how you did this troubleshooting without intros and music and flashy edits etc. this is how it should be done . You jumped right in the problem without wasting any time. Keep it up.
Thank you, thank you, thank you! So much. First the red went out on my printer, then the blue, I tried the print head cleaning procedure many times, (press the button and let the light flash 2 times for cleaning, 3 times for deep cleaning) but it never occured to me that the lines may have drained out. I opened it up and sure enough, 2 of them were empty, I did the 5 flash procedure and watched with glee as the lines filled up with ink, just like in your video. Now my printer is printing a perfect test pattern. Thank You!!!
It is worth mentioning that Ink flushing wastes a lot of ink. The process will make your ink tanks easily throw away between 25% to 50% of your ink from the ink tanks. Use the syringe method instead to suck ink back into the tubes. Many videos of it are available. I personally do it that way after losing most of my ink with the ink flush method.
Is there any service manual, which teach us all of those "button & blinks" combos? I know few already, including service mode, but some complete list would be fine 🙂
This used up a third of my ink before i unplugged my printer to make it stop!! And now NONE of the colors are printing correctly!! Following the advice of this video may have completely DESTROYED my printer!!!!
Hello BrendaJessie, this video can not destroy any device, it only can help. I am sorry to hear about your printer. Probably the nozzles of the printhead are hardly clogged and this method doesn't give the expected result. You can contact the local service center for replacing the printhead. Good luck!
Hey, READERS- It ✅ WORKED❗for my Canon G3202... Yes, it used a LOT of ink, but it is WORTH IT...😁 I just recently bought four new bottles, anyway... I'm BACK in BUSINESS...❗ 👉🏼Thankyou, TONER REFILL VIDEOS MAN... Donald 😌
I'm facing a weird problem. When I print the test page, the yellow colour is printing as green and the magenta colour shade is also wrong (a lot darker). Same happens when I print a colour image, all the colours are wrong. I cleaned the print head, but no change. How do I fix this?
It's a 8 year model launched in 2016. Can't understand why cannon has not upgraded it? EPSON 3252 launched in 2021 and latest. I bought canon g3000 because even after 8 years it still has 4.2 reviews that means it's a long lasting printer and lots of users still using it and has not given negative reviews. Printers often create lots of problems that is why I went for cannon Pixma g3000 because of its long credibility. I wanted to buy EPSON 3252 but denied because it's 1500 more expensive and ratings are same.
I have a G3200, I did as you said "held the stop button down until yellow led flashed 5 times" Nothing happened except the green and yellow leds flash alternating, and the printer won't work! The Canon website says that means "error 5100" (and my printer is now dead) ☹
Hello friend! In your case maybe you have much complicated problem with the device. You can contact the local service center for further assistance. Good luck!
Hello friend! According to the flash light counts the five lights error appears when the cartridge cannot be recognized or appropriate cartridge is not installed.
@@TonerRefillVideos thank you for the answer ..Can you tell me my problem is the black color was missing ..I made deep cleaning ( hold stop button and three blinks) and after that black color is OK and print again , but red color disappeared..Very strange ..And after two days and three times i release deep cleaning and nothing - red color still disappeared
@@TonerRefillVideos this system cleaning ( hold stor button until five blinks is cleaning for all colors , black + red ,blue and yellow ? And stop button until four blinks what cleaning is ?
I did this and while it did do the thing, it has been making the same noises for minutes now... I tried turning it off but it won't turn it off until it's finished, and I don't want to break it by unplugging it
@@TonerRefillVideos Hi again! Yeah it just finished^^ I was just worried since it was taking a strangely (for me) a long time to finish… Like 7 minutes maybe I was worried it got stuck in a cycle