How to code your ABS module on your BMW E39/E46/E53 after replacement! All the steps 

Thanks a lot!!! Worked that way on my e39 525i facelift!!

Thank you, this Video solved my Problem. Now, the lights are gone and the failure also. Perfekt. 👍

Thank you for this !!

Thank you that worked

Piece of cake 🍰 👍🏻👍🏻👍🏻

brother thank you so much

Super! Thanx!

Great vidio will this work on e91 335d had to replace with second hand abs unit thanks

Going to try and attempt this with a E36, is there anything different I need to do with it? on my ABS there looks to be 3 parts an electronic bottom, solenoid section and pump section

I had the same approach also ABS light went from red to yellow, but the dsc calibration is still wirh non calibrated valves 5dd0 5dd2 its nightmare some says its due VIN missmatch but i made also Winkpf coding and in INPA it says coded even wirh correct VIN so its strange

Hey does this work same on e90? Need to replace whole dtc unit. So I need to Code it.

Would this work on e38?

how do you know if it is the pump or module

Hi, I replaceed DME and cas with deferent vin number my car. Now I have abs and traction and brake light on please help

Thanks for this. I've just replaced my ABS module on a year 2000 E38 with a used one and I can also see the coding error 00017 at 1:08. Can anyone please confirm that it also needs coding in the E38?

Has anyone done this with an e60 m5? Is it the same process?

just would like to ask you, because currently my baby e39 530d is having front wheel sensor errors,, and also i feel issues within the brake pedal. i have all new fluid, new master cylinder, new flexi hoses, the lot. i will look for a replacement abs unit, however i am unsure if i need to look for similar serial number abs units when looking for a replacement? thanks man wicked video.

Please can I have a printout of Diagnosis

hello friend im here again, i have replaced the abs unit from one second hand, the abs and hand brake red go away, but, always a but, hahaha the triangle stays on , hace the errors 5e1f . 5e21 . 5e20 . 5e1e . 5d8c. mi carhas ASC button so, in some place i read that the mk60 dont have angle sensor,can you confirmthat? the pa soft dont recognize the angle sensorand inpa etheir, so i dont know if my car should have or not angle sensor. my car was replaced the cluster and the LCM , thistow parts are matched with a vin mumber that dont match the car as well, my qustion its,in this case witch VIN number have to has the abs module? because the pa soft bmw1.4 scanner can write the vin in the abs module, but witch vin have tohas to erase this error, thanks a lot, my car comes with a lot of prombles, because has various modules of other cars, bmw 2002 e46 318i 4 cyl N42B20 iwill be very happy for your help

I noticed when you are turning the steering wheel back and forwards, how instantly the car got up the temperature and the lighting outside changed.

Hello can you help me please! I am trying to use NCS expert but I get this error. Do you know what it could be? COAPI-2000: Fehler in EDIABAS oder in SG-Beschreibungsdatei BIP-0001: Zu langer Job-Parameter oder String-Register-Zugriff FRM_87 COAPI-2000: Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ COAPI-2000: Fehler in EDIABAS oder in SG-Beschreibungsdate FA_READ: A_PL2FRX

Im having problems in NCS expert. VIN is faulty. Cable is OK , pins bridged com1 latency1 ignition on. Inpa works fine. As soon as i select chasis and ews it throws a buuunch of errors with VIN is faulty on top. Any advice ? Tried looking online , but everything comes down to cable bad, tried my cable on different e46 , works.

Get your carly adapter today to diagnose and code your bmw: www.mycarly.com/?ref=yja0n2z&

I have same problem abs

Hi mate, hoping you can help. Im all set up with everything but when i scan i dont get DSC i get DXC is that the same?

not sure this is the place to ask this, but, I have an 96 e39 523i and it is slugish, the tester gave me an eror for camshaft sensor, so I chnged it... I stil lget the error and the car is acting the same! do I need to relearn the part in some way ?

With what file you code that DSC module? you have not even read the codding from the module, how can you code it??

Why I can’t see Dsc option in my NSC Can code everything else but Dsc is missing? Any advice?

Hello friend i tried all your steps but there is an error coding the message shows “zcs changing it’s active” and don’t code . How can I fix that, my car show an error code vin not match some like that in German lenguaje . Mine it’s 2002 e46 bmw 318i sedan automatic thank for your reply

Cant wait to try on my e39. Thanks for the step by step. What was that adapter for to K+DCAN. I bought the cable but didn't know I needed that adapter. No one mentioned it in the forums. 🤔

help me brother ples

Dick edit at 5:47. Engine was cool before the edit then was at operating temp after. How long did the lock to lock actually take IRL?

I keep getting a canbus error.

LOL THATS IT!?

Is there any reason for these to be coded except for bmw to make money ??? God forbid we could just buy a part and fit it

5000 dollars on software to program it is what everyone has laying around........