Have you check my newest video? Find out how to browse the internet on airplane mode. A great life saver for online quiz takers! 👉🏾 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Gc_0W_NTy0Q.html
If the HDMI is not faulty, then it is simply that the PC is not detecting it. Here is what you can do. Plug the HDMI in the projector first (already turned on), connect it to the PC and then turn it on. Unplugging and re-plugging the cable is enough to resolve this issue perfectly.
Please when I connect the sound cable to my laptop when the vgmi is plugged in from the projector,the sound doesn't appear in the speakers.there is always unusual sound that is heard.if not removed immediately it will blast. Needs help We use it at church
If you turn the projector on immediately after turning it off, the cooling fans may run at high speed momentarily and cause an unexpected noise. This is normal. visit here for help: files.support.epson.com/docid/cpd4/cpd40467/source/troubleshooting/reference/problem_sound.html
I using HDMI through my projector to laptop, but when I start to show it only half of the screen will show, and if I show power point it will never show any slides. What the fck is this problem?
press Windows+P (hold the Windows key and press the letter P). You can now use your arrow keys to select the mode you want and press Enter when done (or use your mouse to click on the desired mode). Many laptops also have a key combination that will allow you to rotate between the display modes. If you have Windows 7, this will be the method you use to change display modes. Look for a key (usually one of the function keys) that has a picture of a display on it. You usually have to hold a special Function key (usually labeled Fn) and press this key to switch between the different modes. After you press the key combination, wait at least five to ten seconds for the new setting to take effect before you toggle to the next setting
