How to Connect the EASTRON meter to Deye Hybrid Inverter 

Very useful video thankyou.

Question... in the diagram you have the inverter connected to terminal 1 and 3 on the meter. 2 and 4 connected to grid. But then u say you connected 1 and 3 to grid. Can u clear me up? Thanks

Good detailed video! I want to use a CT sensor because its complicated and dangerous to in-line the smart meter directly into house's main line. Does that Eastron SDM230-ModBus model (at 1:42) also accept CT sensor?

Hello, Can you tell me which SDM 230 configuration is recommended for communicating with the inverter? Add ? Baud? Etc... Thank you!

...and 8 or so minutes in, i spot the detail i've been chasing for hours. The meter must be set to 9600 baud, mine was set to 38k4. Sure would've been nice if that was in the dang manual!

I have Sun-5k-g model, no RS485 port. Recently installed a SDM120, how should I connect it to inverter to calculate exported and imported energy?

I have a sun-6k-sg05lp1-eu inverter, I connected an estron sdm230 modbus V2, but nothing works. I used both the orange white pair, and then the blue white pair, the speed is 9600 bd. I used the meter port. I configured the inverter with the Eastron 1p meter. Do you have a suggestion for me?

nice can that work with Solis grid tie inverter 1P4K-4G-US

I have an acrel meter r485 from an existing Solis install. Would this need to be replaced?

Will Eastron SDM630MCT-MOD-MID Meter work on Deye 5kW EU Hybrid inverter. I cannot get the 230 model in Ireland.

when we use the Eastron smart meter, we dont need the CT Coils? Thank you!

How much power can the sun-6k hybrid inverter take on a single MPPT?

Can I use single eastron to connect to 2 or 3 deye hybrid inverter? like the 3 phase deye grid tie inverter..

Is there a way to use a wireless meter? To send information from the meter through wifi or Zigbee to the Deye inverter?

Thanks 👍

any benefits of using a Eastron meter instead of the ct clamps?

On what Adress number should the Modbus meter be installed (you can;t select an adress for the meter in the Deye)

Good vídeo, can i use a hiking dds238-2 zn/s?

Can this work with SKY-MV01-8048 Hybrid inverter?

Поддерживает DEYE 8kWt работу с CHINT DTSU666 Single Phase?

deye 8k sg01 produced in 2021 support meter? Thanks!

Can you use other rs485 meters too?

I forget the data logger password of deye 5kw inverter, have any solution how to reset logger password

Heloooo Helooooo……attention,in+ out ,mistaking😂😂😂

You do completely opposite way what's the diagram saying. 5:40 min connect the inverter into 1 and 3 , but you connect the inverter into 2 and 4.....