#photography #mcfarlane #actionfigures
The 3rd figure in the Starro BAF is Owlman. With just a few paint apps it looks so much better. The cowl in grey makes the figure.
You can go a step further and change the cape. Its very intricate as it has 3 layers. It even has detail on the inside of the cape.
Made of pleather, it took three layer to make the complete cape.
1. remove the cape by cutting at the seam- leave the cowl on the shoulders
2. cut the scallops that cover the shoulder, 3" and the scallops the are underneath, 4" , These can. be doubled or single sheet material. These will need a wire to pose them. Choose 3/4 not all of them.No wires for the ones on the shoulder.
3. cut the inner details , no wires and should be single sheet of pleather. Glue down on the inside
4. sew the exterior larger scallops together, tape them to hold them in place while sewing.
5. glue down the scallops over the shoulder by gluing the down with superglue under the cowl
6. cut out the main cape in a semi circle and cut he scallops. Sew in the spline for a wire.
7. glue down the interior details with superglue, the smaller scallops should be last as they are on top of the larger
8. sew the exterior group of scallops to the main cape only at the edges
9. drill two small holes in the back where the original cape was and run a wire in the cape to glue into the holes drilled
10. glue the ends of the cape under the shoulder ends of the cowl with superglue
Chapters
00:55 cape removal
02:23 cape construction
11:29 cape corrections
12:02 paint
17:48 gray shades
23:48 liquid mask
26:45 dry brush
32:10 cape corrections
34:08 final product
Sharing techniques to customize current action figures by painting or sculpting what is needed. Producing a figure the is either improved or just creating one from parts of other figures.
Lighting
evandesigns.com
lightmybricks.com
briksmax.com
Amazon links: are part of the affiliate account and I do receive a percentage for any purchase.
RGB ring light
amzn.to/3zRD2TX
Alive blutooth
amzn.to/3vX6WnB
Mr Super Clear
amzn.to/3SkuFYg
UV Resin Kit
amzn.to/3SlPzpJ
UV light
amzn.to/3BxuaUD
Apoxie Sculpt
amzn.to/3BC2MF9
Airbrush
amzn.to/3PW84Qe
Airbrush Quick Release
amzn.to/3oMmZQX
Turn Table
amzn.to/3QeiHO1
Vallejo Premium Paint
amzn.to/3zyfIJI
Brushes
amzn.to/3zG08wO
Fabric quarters
amzn.to/3zG08wO
Fabri-tac glue
amzn.to/3zG08wO
Locktite
amzn.to/3zG08wO
instagram
ink drop customs
Email:
photobella@mac.com
Not sponsord by any company, all items are purchused by me and and items are created by me. Any links shared are only to share information to other creators.
21 окт 2024