Тёмный

How to Cut Glass Bottles | 3 ways to do it 

Shake the Future
Подписаться 183 тыс.
Просмотров 9 млн
50% 1

Check out how to melt metals in the microwave: • Melt Metals in the Mic...
What to do with glass bottles? Recycle? Yes, that's the way to go, unless you want to use them to make something cool.
Drinking glasses, vases, lamps those are only a few things you can make from bottles.
In this video we are looking at 3 ways to cut glass bottles.
√ Using a string
√ Using a glass cutter
√ Using a bottle cutter
►Bottle Cutter used in the video:
amzn.to/1ORrvoj
Here is a bottle cutter for serious bottle cutting
►Creator's Bottle Cutter
amzn.to/1rEfZpO
Warning:
Make sure to take OFF bottle lids or corks before doing this.
If you try the acetone method, make sure to do it outside as acetone is highly flammable.
Don't forget to wear your safety glasses and gloves.
-------------------------------------------------------------
Music:Kevin MacLeod
Title: Whimsy Groove
Whimsy Groove, Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons.org/licenses/b...

Хобби

Опубликовано:

 

19 июн 2014

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 1 тыс.   
@rafaelbruno9465
@rafaelbruno9465 7 лет назад
good tip is to sand the edges once cut for safety. use 60 grit paper and then 240 for a smooth finish
@notmyworld44
@notmyworld44 Год назад
Then use a soft Dremel wheel with jeweler's rouge (Dremel polishing compound) to put a high gloss on it.
@queenofno6055
@queenofno6055 Год назад
@@notmyworld44 I'm so glad I found this! I've been saving cool bottles forever in hopes to make them into something! any tips are welcome lol
@fupidox5642
@fupidox5642 Год назад
@@queenofno6055 Take 10 glass bottles that you are fine with damaging and figure it out on your own, there is not much to fail at so you will be fine in no moment. But if you want to use cut bottles as glass for drink, remember that glass powder and chippings are very dangerous, so better to throw bottle that looks bad than risk damaged insides of yours.
@David-cm4dr
@David-cm4dr Год назад
you also need to keep everything wet and idealy underwater unless u wanna get lung cancer
@eligebrown8998
@eligebrown8998 10 месяцев назад
Thanks
@animeguy6877
@animeguy6877 3 года назад
Me: Trying to go to sleep. RU-vid: Wanna know 3 ways how you can cut glass? Me: sure.
@buy1.9mvideoeffects66
@buy1.9mvideoeffects66 3 года назад
🔨
@TannerCampbell1983
@TannerCampbell1983 9 лет назад
Wow. I almost killed myself doing this (method #1) First of all, I made an incredibly stupid rookie mistake. I left the cork in the bottle I was cutting. Secondly acetone is more flammable that I thought it was, I mean this shit is like gasoline. I did this in my kitchen sink. When I lit the string on fire is was an out-of-control flame and I dropped the bottle in the sink. The gases from the acetone collected in the sink and did a huge flare up, burned my hand pretty bad. When I put the bottle in the bucket of water (remember I had left to cork in) the quick drop in pressure and temperature exploded the bottle 3 feet from my face. Every piece of glass missed me. I'm lucky I'm not fucking dead. So here's tip for you newbies (newbies like me), be fucking careful, do this shit outside, and wear protective equipment on your eyes and hands. The dude in the video is a pro whose done this a hundred times or more. And NEVER leave the fucking lid on. I can't believe I did that. Good video, good tutorial, just be careful if you've never done this before.
@ShakeTheFuture
@ShakeTheFuture 9 лет назад
Tanner Campbell Thanks for sharing your experience. Glad you're OK. Yes, leaving a cork inside is not a good idea. I will add an annotation, telling people to make sure they take off the lid/cork. Thanks
@Smacker39
@Smacker39 9 лет назад
I am so sorry.. But this make me LOL.. Glad you are alive..
@TannerCampbell1983
@TannerCampbell1983 9 лет назад
I laughed almost immediately after it happened Smacker39. I couldn't believe what an idiot I was about it.
@MrFjordbak
@MrFjordbak 7 лет назад
thanks for the warning and the funny story
@Anmol34
@Anmol34 6 лет назад
Tanner Campbell Wuss.
@Ashleyd1722
@Ashleyd1722 8 лет назад
I'd do the second method for sure! Thank you for putting this up!!! Helpful.
@melissanicole8124
@melissanicole8124 6 лет назад
I never thought of using a bottle cutter, absolute MADNESS!
@jkeezy93
@jkeezy93 2 года назад
After 10 videos, I ended up using a metal file, going around the bottle where I wanted to cut it until it was as good as I could get it. Then while the water was heating up to boil, I got bored. Got my blowtorch. Went around the filed part a couple times, then put it into water, and it worked! The acetone and string method is the closest to what I just did, and it seems MUCH more simple! Going to use that from now on! Got a nice whiskey glass made out of a Jameson bottle. The next one I make I'm doing the acetone string method and making it larger, more for regular drinking stuff, not a small whiskey glass.
@JadetheGoober
@JadetheGoober 2 года назад
@the last part: a human of class 😎
@lisam.8971
@lisam.8971 6 лет назад
This is great! I have some beautiful blue bottles that I have been saving. Now, I will give them a second purpose. Thank you!
@jmwinter1
@jmwinter1 7 лет назад
I have tried every way there is. I'm sticking with the bottle cutter then candle method. It never fails and gives perfect results. No "do-overs". No frustration.
@igrewold
@igrewold 6 лет назад
Man, I have been looking for this since ever! Thanks a lot! ;D You are glass bottle cutting king. ;] Regards.
@MikeyGiambra
@MikeyGiambra 9 лет назад
Thanks Gru!
@DIMTips
@DIMTips 5 лет назад
great video, tried this myself and it worked in the video I produced. Thanks again.
@jeffreykuhn3736
@jeffreykuhn3736 5 лет назад
He makes it look so EASY. Great video....way better than the first one I saw and not going to mention. I am ready to get started. Glad I didnt use a propane torch. Candle so much more efficient. Perfect.
@danicamcadam5499
@danicamcadam5499 7 лет назад
That was. A lot of help my brother ! Thank you from Colorado
@wizzywod
@wizzywod 7 лет назад
Danica Mcadam
@victoriastump4203
@victoriastump4203 7 лет назад
I've broken so many cups but have allot of wine bottles to replace them! great video
@darrendarmanin
@darrendarmanin 2 года назад
Cool video, I throw away so much class every day, little bit of time and I could have a collection of soda bottle glasses
@juliababush9525
@juliababush9525 7 месяцев назад
I like your ideas and the "bottle music" at the backstage😊. Thank you.🍾
@MattDunton
@MattDunton Год назад
I tried the first method and it resulted in the breaks not being where I intended. Scoring and using 2 candles to maximise heat and getting it v hot then cooling in water caused the cracks to appear in the right place. Thanks for the video!
@ClayClaim
@ClayClaim 7 лет назад
Really fantastic! Thank a lot for your channel :)
@bigfatboiygm
@bigfatboiygm 3 года назад
Hey! It's clayclaim
@bigfatboiygm
@bigfatboiygm 3 года назад
I love it channel
@bigfatboiygm
@bigfatboiygm 3 года назад
If you see this please can you reply
@buy1.9mvideoeffects66
@buy1.9mvideoeffects66 3 года назад
Good work
@peeweecruz2321
@peeweecruz2321 4 года назад
I'm a new collector and I appreciate your information I hope to one day be like your community or coin collection
@peterwong3914
@peterwong3914 3 года назад
Your videos are so helpful . thank you !
@lindaforth7472
@lindaforth7472 8 лет назад
So I have the bottle , got the string , the acetone and away I go . Looks really simple to do . After setting fire to the string the sink then caught fire where I'd poured the acetone over the string and the whole bottle was in flames and so was my hand .In panic I ran yelling " the house is on fire" to my bemused boyfriend who casually turned the tap on .After putting more thought into what I was doing and 3 more tries this did actually work . Safety first !
@charlieanderson1448
@charlieanderson1448 8 лет назад
You dumb shit.
@lindaforth7472
@lindaforth7472 8 лет назад
Yep that's me !
@krishnamission2432
@krishnamission2432 8 лет назад
hahahahaha! cutie!
@mariselahernandez7589
@mariselahernandez7589 8 лет назад
you wereno supposed to pour the acetone onto the string you're supposed to put the string into a container let it soak.
@hayleykilby9576
@hayleykilby9576 7 лет назад
that sounds like something I'd do 😂
@TheYellowshuttle
@TheYellowshuttle 7 лет назад
Works perfectly. If the string is thin and tightened as much as possible, the cut could be made very precise. Tried it. Worked very well. Thanks!
@alyagoff276
@alyagoff276 3 года назад
This was super helpful! Thanks for sharing your process.
@tunchapaxel754
@tunchapaxel754 6 лет назад
Great job. keep it up. 👍
@seanwilkinson3975
@seanwilkinson3975 8 лет назад
Great work! The acetone method was a pleasant surprise; I've never heard of that trick before. I'm definitely going to try it. If it comes out smooth enough, it'll be a drinking glass, and if not, it'll be a vase.
@nopedynopenope107
@nopedynopenope107 8 лет назад
+Sean Wilkinson the acetone method isn't good for drinking glasses, it eill not be straight enough. the better is the second method, with the glass cutting blade.for it to be more practical, do it with a candle and cold water, not ice.
@arktos7270
@arktos7270 Год назад
Hey it's me from the future It's actually the same trick blues musicians used for their bottlenecks. And then grid it on the pavement
@teresadesimone8942
@teresadesimone8942 3 года назад
Thank you for the demo of glass cutting. I was wondering if you could help me figure out how to Evenly cut the tiny light bulps from Christmas light chains (from a light chain that doesn't work any more)? I need them for my Miniature project, but I cannot find any tools that are small enough and safe for this purpose. I tried using a small drill with a flat cutting disk, and it works, but the edge is not even and it is too much work to have to sand the edges after... Do you have any ideas as to what I can do? Thanks again. :)
@thoaitaitran109
@thoaitaitran109 6 лет назад
Very helpful, thank you!
@Ivy4625
@Ivy4625 6 лет назад
You've really out effort into your video. Props!
@pablopicasso6699
@pablopicasso6699 9 лет назад
Hello, does the acetone process work with average sized wine bottles? Or is it only effective on the smaller bottles?
@hhywhy
@hhywhy 6 лет назад
So i wanted to make some cool diy's with this glass bottle. So I found this video at last and I was amazed of how easy the string method was. Next I took a string, vine bottle and and pure alchocol instead of acetone. Next when I put the string on fire it went well. Next I dropped the bottle to a basin of water but it did not brake. I tried it again but suddenly the whole bottle caught on fire and we all screamed for the sake of our lives. The videos good. The moral lesson of this tutorial is think twice before you leap as nd also safety first.↕
@anagavilan4476
@anagavilan4476 7 лет назад
the mystery of bottle cutting was solved..thank you😆
@Alebso
@Alebso Месяц назад
Good work n nice drums 🪘 n music 😊
@yeunome2170
@yeunome2170 7 лет назад
So cool! I always wanted to cut bottles. I won't be throwing them away anymore. Thanks for posting.
@ShakeTheFuture
@ShakeTheFuture 7 лет назад
Cheers!
@mariselahernandez7589
@mariselahernandez7589 8 лет назад
I have a few calypso lemonade bottles that are beautiful and I cannot wait to do this too. (method 1 of course)
@Crisc0Infern0
@Crisc0Infern0 9 лет назад
Great video, thanks for the info!
@ShakeTheFuture
@ShakeTheFuture 9 лет назад
Crisc0Infern0 You're Welcome!
@catg8383
@catg8383 Год назад
For quicker cut using glass cutter, simply apply very hot water to bottle after using glass cutter, then apply very cold water. It’ll snap off quickly
@kyrayeager5272
@kyrayeager5272 4 месяца назад
Thank you!!
@zuwabla
@zuwabla 8 лет назад
Should mention that the edge of the cut glass needs to be smoothed down with a grinding stone or heavy duty sand paper. so none gets cut...no bloody mess please!
@usuitakumi1523
@usuitakumi1523 8 лет назад
+J Davis I thought that was obvious?
@dannyhussain5489
@dannyhussain5489 8 лет назад
+Yashasvi I thought not voting for Donald Trump was obvious.
@usuitakumi1523
@usuitakumi1523 8 лет назад
Danny Hussain omg, haha yeah, the Americans are fucking that one up royally I see why your comment was necessary now xD
@jamesgardner5587
@jamesgardner5587 6 лет назад
Common sense.....my bad common sense not common anymore 😂
@adamwallis3235
@adamwallis3235 6 лет назад
Danny Hussain reason he won is cuz Hillary is worse, not cuz he was good
@mycroftxxx42
@mycroftxxx42 9 лет назад
WOW! Candle and ice. First time perfect cut. Took two heating's far enough away to avoid carbon buildup. When I went to dry the bottle off after the second icing, my beer bottle fell apart. Spent about 10 min with sand paper to break the edges on both top and bottom. Thank you for the education.
@ShakeTheFuture
@ShakeTheFuture 9 лет назад
Randy Miller Great to hear that. Thanks for sharing your experience.
@1015KillAtron
@1015KillAtron 8 лет назад
+Shake the Future I'm having trouble cutting with candle method. its either that im to impatient or im doing something wrong. Could you help me on this?
@hamidakhatoon3924
@hamidakhatoon3924 7 лет назад
😊
@Christophersanchez1326
@Christophersanchez1326 7 лет назад
good method. another way I was doing it. I was breaking bottles more than getting a good cut. the part I wanted broke and the part I didn't want was perfect.
@tpepfeffersack
@tpepfeffersack 2 года назад
Great video, I enjoyed watching it. Cut you please let me know which strength of cutting knife you used (2, 4 or 6?)
@JohnnyCoolMusic
@JohnnyCoolMusic 4 года назад
First idea took a few tries, but put the bottle in cold water before the fire dies.... it works! Thank you Shake The Future :)
@gorgeous3325
@gorgeous3325 7 лет назад
Would it be advantageous to combine aspects of different methods? For example, score the bottle as in method #2, then tie an acetone-soaked string to it and proceed as normal for method #1?
@moniquehargrafen4821
@moniquehargrafen4821 Год назад
This is the question I have?
@bondpaz
@bondpaz 3 года назад
Now next video: 3 ways to put out a fire. 😁🔥 👍 Awesome video.
@viperashwin974
@viperashwin974 4 года назад
Very good idea, I'm going to try it
@MeTube3
@MeTube3 3 года назад
Use sturdy leather gloves for handling glass. Make sure you clean any acetone off your hands or gloves before you light the string.
@mr.christophersmithchristo6134
This is a good technique for cutting bottle and to put yourself to sleep.
@yassinepro85
@yassinepro85 4 года назад
The easiest way to cut glass: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ifpvZxd_MII.html
@seeamerica1
@seeamerica1 8 лет назад
Super! How long does this take to do? I live near a bottle recycling place & I can get all the free bottles I want.
@michaelhill2394
@michaelhill2394 7 лет назад
You make it look so easy
@Hermboldt
@Hermboldt 8 лет назад
method one is very simple. make sure the inside of the glass is dry or you will have difficulties as the water inside the glass will absorb heat and the glass will not break cleanly if at all. Just be patient and make sure the glass is dry and you will have no problems :) i've done method one dozens of times. Most of the glasses in my cabinets are reused glass bottles :)
@anupotakteskardies5420
@anupotakteskardies5420 7 лет назад
with cold or hot water?
@TheSiLq
@TheSiLq 7 лет назад
cold
@JKRowl
@JKRowl 5 лет назад
what kind of string is used here ? cotton string ?
@arktos7270
@arktos7270 Год назад
@@JKRowl non synthetic.
@metalman8733
@metalman8733 4 года назад
Very nice video. Thank you so much for sharing. But I have a question here, I assume the cut-out surface will be of rough texture, so do I need to polish them, say in case I want to use the bottom portion as drinking glass (a bit weird may sound). Thank and appreciate again for such a wonderful video.
@mikebond6060
@mikebond6060 2 года назад
Its not weird at all I want to do the same
@ananyaakap
@ananyaakap Год назад
Hey, please do the finishing using different grits of sand paper..
@metalman8733
@metalman8733 Год назад
@@ananyaakap thank you. Which grade of sand paper if you may suggest please
@ahnoumanrahman3464
@ahnoumanrahman3464 5 лет назад
Superb technical video thank you so much nice to seend this
@jassibhinder9017
@jassibhinder9017 4 года назад
Hey man love the video and the accent
@ss-ky1vl
@ss-ky1vl 8 лет назад
Dude your grammar is on POINT 😂😂
@adminos15
@adminos15 8 лет назад
background song just like in Far Cry 2 Good job
@rowanmanning1464
@rowanmanning1464 Год назад
Using the 2nd one combined with an ice water tub for cooling was effective for me.
@suzanmellis
@suzanmellis 2 года назад
the best and easy way. thanks
@llortaton2834
@llortaton2834 8 лет назад
brb making a gravity bong
@jacoblucias5686
@jacoblucias5686 8 лет назад
holy fuck this is exactly why I was searching up how to cut bottles
@Gio.L
@Gio.L 7 лет назад
me too :D
@acidwolfpackgang
@acidwolfpackgang 7 лет назад
almost everyone is here for that c; shhh
@savageonabike3370
@savageonabike3370 7 лет назад
same xd al of us are here for that
@peacecord2744
@peacecord2744 6 лет назад
Yep. Same here.
@MsFunology
@MsFunology 3 года назад
Very useful tips! Thank you! I just got me a bottle cutter. The instruction said I should soak the scores with hot water and cold water. Didn't work. I saw your video and tried number 3. It worked! However, my bottle did not separate as smooth as yours and didn't follow the line I scored with my cutter. Any idea why?
@raynorereje5415
@raynorereje5415 2 года назад
i so love your video. can u tell me wat suitable string will i use pls ty
@edpastore
@edpastore 7 лет назад
What about scoring with a glass cutter and then use the string/acetone method to get it to split ?
@pjmbidge632000
@pjmbidge632000 9 лет назад
Whenever working with Glass wear gloves.
@randysavage1450
@randysavage1450 6 лет назад
ur so tuff bro.
@TheSign2020
@TheSign2020 5 лет назад
I hate gloves. When I damage my hands to irecognition then say I should have worn gloves. Then again when they heal I hate gloves.
@blueladylikeable
@blueladylikeable 5 лет назад
IMPORTANT - sand the edges, they are razor sharp
@samarth5032
@samarth5032 6 лет назад
Nice video thanks for this video🙂
@paolastreghetta5970
@paolastreghetta5970 7 лет назад
tre metodi abbastanza facili, grazie! l'idea che mi mancava
@pup9et
@pup9et 4 года назад
For those of you who dont know what is he reffering to when he says "acid" It is Nail polish remover. An you dont need a lot of it.
@bubbleman2002
@bubbleman2002 8 лет назад
First one. *Science* Second two. *Sharp things.*
@CathyA144
@CathyA144 2 года назад
Men thanks! So cool, I’ll do it right know
@user-il8ku2xc9z
@user-il8ku2xc9z 2 года назад
Can you use a saw to cut glass or score glass? If it's riff on the edges what grit of sandpaper do you think would be the best.
@MsLee-oh7hy
@MsLee-oh7hy 8 лет назад
I like method 1 the best.
@ronalyncatamco9988
@ronalyncatamco9988 8 лет назад
+Amaris Lee Have you tried the method one? Cos I'm really gonna do it.
@404killer
@404killer 6 лет назад
did you do it?
@heyitsnataliegreen5100
@heyitsnataliegreen5100 8 лет назад
He sounds like gru of despicable me 😂
@ShakeTheFuture
@ShakeTheFuture 8 лет назад
+HeyItsNatalie Green Yes, I get it a lot.
@heyitsnataliegreen5100
@heyitsnataliegreen5100 8 лет назад
Thank u for replying, I didn't mean it in a bad was as well
@heyitsnataliegreen5100
@heyitsnataliegreen5100 8 лет назад
Yeah I realised straightaway 😂
@safilly9964
@safilly9964 5 лет назад
that "oh Yeeeah" that the end
@1971228
@1971228 5 лет назад
I thought I am the one lol 😂
@KyleeMoran
@KyleeMoran 7 лет назад
this is tooooooo cool :]
@stclairstclair
@stclairstclair 4 года назад
I've used my $50 water-bath diamond tile cutter, cuts glass very clean.
@ToshioThunder
@ToshioThunder 8 лет назад
"Remember to wear gloves,"--Clearly not wearing gloves :P
@krystahnash6803
@krystahnash6803 3 года назад
When that acetone eats up his fingertips he'll know it lol
@JanelReliford
@JanelReliford 9 месяцев назад
​@@krystahnash6803worst if the gloves catch on 🔥
@freezin48
@freezin48 5 лет назад
Yes, easy to see how easily a fire starts.
@KabayangManny
@KabayangManny 3 года назад
Good sharing bottle cutting
@fiona3821
@fiona3821 3 года назад
Thanks for sharing. Would this work on ceramic?
@fastlane2545
@fastlane2545 4 года назад
Young dude: Here's a free tip for you. Use gloves.
@AlbertoPerez-es2ly
@AlbertoPerez-es2ly 9 лет назад
don't you have to sand the edges?
@ShakeTheFuture
@ShakeTheFuture 9 лет назад
Alberto Perez Depending for what you will use it. Sometimes the cut is perfect, so there is no need for sanding. If you're making a drinking glass, it's always a good idea to sand it down.
@ranindragouda2725
@ranindragouda2725 4 года назад
Its really nice bro
@GeetaAthwal
@GeetaAthwal 5 лет назад
nicely explained
@bestamerica
@bestamerica 8 лет назад
' after cutting the glass bottle then use a fine fine sandpaper on the cutting edge glass... that help smooth edge and not sharp cut on the skin
@deedofi7970
@deedofi7970 6 лет назад
How to cut a bottle: use a bottle cutter
@learnbuildofficial3218
@learnbuildofficial3218 3 года назад
Good work, interesting video
@ART_INDIA
@ART_INDIA 3 года назад
3 option is awesome 👍
@venriamaia830
@venriamaia830 8 лет назад
hybrid between method 1 and 2 should work
@rambi1072
@rambi1072 8 лет назад
+Venria Maia Or, even better, 1 and 3.
@swiftislacedfasho6708
@swiftislacedfasho6708 8 лет назад
+Rambi “Rambi9000” ikr lol
@brandonmanson8866
@brandonmanson8866 5 лет назад
they all work on their own though. You start hybridizing and adding stuff and leaving stuff out, your gonna have a situation on your hands, that I don't think your ready for. Don't leave out the safety glasses, What ever you do.
@MsLW1000
@MsLW1000 7 лет назад
should you wear glove for hand protection
@ShakeTheFuture
@ShakeTheFuture 7 лет назад
Yes, I should.
@ramonlayson4816
@ramonlayson4816 3 года назад
Ayos Ang galing 👍👍.
@janettevargasroman2165
@janettevargasroman2165 4 года назад
Super la información y sobretodo .q la explicación está clara .y en español.DIOS TE BENDIGA.Y GUARDE TU ALMA
@helloyoutubeworld1004
@helloyoutubeworld1004 8 лет назад
It made me so nervous every time he would touch or run he's finger around the rim!😰 All I could think about is the nasty cut he could get!😖
@yassinepro85
@yassinepro85 4 года назад
The easiest way to cut glass: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ifpvZxd_MII.html
@orionm4254
@orionm4254 4 года назад
Depends on the thickness of the glass and method used. Typical 1.5 litre wine bottle for instance is about 5mm- 1cm thick. Its not too bad if the person knows how to do it.
@paulgreenwood1830
@paulgreenwood1830 4 года назад
Orion M42 🤔...10 mm thick wine bottle, hhhmmmm...wow, okay then🙃🔫💨💨
@oopriyapriya
@oopriyapriya 4 года назад
Wear protective goggles, gloves..and file the edge of the glass with a heavy duty sandpaper.
@fredbloke3218
@fredbloke3218 11 месяцев назад
A bottle sized jubilee clip makes a good guide for the scoring tool, the screw mechanism needs to be moved to opposite side and re-tightened to complete scoring.
@harryfire411
@harryfire411 3 года назад
Cool video I just finished a quart bottle of Corona beer I'm thinking man that would be a cool cut
@ThatDayDreamer_
@ThatDayDreamer_ 3 года назад
there's so many kids and adults with not much common sense on here I'm kinda surprised there's no disclaimer or warning at the beginning of this video to not try this at home or you're a professional/done this 100 times before so wear safety equipment Edit: there are warnings in the description, idk if that was added after this video was tried by those celebs, but still maybe it should've been on the video visually as well
@RA-wp6th
@RA-wp6th 3 года назад
Tbh I think they should take this video down. The fire method shouldn't be advised, seeing as there are other safer methods available like option 3.
@hopedean6424
@hopedean6424 8 лет назад
DOES NOBODY ELSE CARE THAT THAT CANDLE JUST FELL DOWN?
@Jillian1stJohn3-9-10
@Jillian1stJohn3-9-10 5 лет назад
What grit sand paper would you use to smooth the edges?
@albertcasas3794
@albertcasas3794 5 лет назад
Wow amazing!!
@lynchun6175
@lynchun6175 7 лет назад
He Sounds A Little Bit Like The Guy In Despicable Me
@racerhex2690
@racerhex2690 7 лет назад
He also sounds like the cheap doctor from the Simpsons ,remember ? " Hiii Everybody..."!
@polop2301
@polop2301 7 лет назад
doctor nick! "Inflammable means flammable? What a country!"
@JodBronson
@JodBronson 4 года назад
*The Gru in training!* 😂😂😂😂😂😂😂
@miguelperez5960
@miguelperez5960 8 лет назад
sounds like the count from sesame Street, repeat 1,2,3 times ah ah ah ahhhhh.
@e.clectic2533
@e.clectic2533 6 лет назад
I can't believe I found the music from Corporation INC. on ArmorGames anywhere but there! I've spent hours playing that game! Love it!
@elenafinna2969
@elenafinna2969 3 года назад
Nice Job!!!
Далее
How To Cut A Glass Bottle With A Simple Tool!
6:05
Кто победил Леру?😳
00:35
Просмотров 662 тыс.
5 Things You Can Make from Glass Bottles
3:49
Просмотров 1,8 млн
DIY: Cut Square Glass Bottle In 3 Simple Steps
5:05
DIY Guide. How to Safely Cut Glass Bottles at Home
4:16
How to Cut Glass Easily for beginners
11:39
Просмотров 307 тыс.
Россия
0:15
Просмотров 1,3 млн