Тёмный

How to De-Pin ECM Connectors | Engine ECM Connector Pin Removal & Connector Repair Guide 

Automotive Diagnosis: Cars Repair &Training Guides
Подписаться 49 тыс.
Просмотров 35 тыс.
50% 1

In this episode of electrical connectors repair I show you how to remove the pins from the Engine ECM connectors which are very complicated comparing to the regular, small connectors.
Join the channel for more videos and more support:
www.youtube.com/@AutomotiveDi...
- Watch the 1st Episode for removing Pins from many more connectors in the following link:
• Automotive Connectors ...
How Immobilizer Works | Transponder Chip, Immobilizer Components, How to Bypass Immobilizer
• How Immobilizer Works ...
Disclaimer:
Any information contained in this video is just the understanding of “Automotive Diagnosis: Cars Repair & Training Guides” and it is not an official guide or reference, so everything provided in this video is just a share of our experience and understanding and they are provided as a courtesy for your reference only. So, if you are using any part of this video, use the information at your own risk. We highly advise you to check the manufacturer owner’s manual before performing any act of removal, diagnosis, inspection, or repair on your car to know about what you are authorized to do on your car, what the correct and legal procedure is and what risks might be involved, also viewers are strongly advised to consult a licensed person before any sort of inspection or repair. Due to the factors beyond the control of “Automotive Diagnosis: Cars Repair & Training Guides”, we cannot guarantee against improper use of information or tools or systems, or the procedure provided. “Automotive Diagnosis: Cars Repair & Training Guides” disclaims any damage, injury or loss caused by your decision to follow the steps provided in this video.

Авто/Мото

Опубликовано:

 

4 ноя 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 58   
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
Watch another episode for connector pin removal in the following link: How to De-Pin Any Connectors Quickly & without any Expensive Tool | Connectors Terminals Removal ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gzf524fYAxE.html
@twinboost9325
@twinboost9325 5 месяцев назад
Thanks for the great video, straight to the point and worked like a charm 👍
@AutomotiveDiagnosis
@AutomotiveDiagnosis 5 месяцев назад
Glad you liked it 👍👍👍
@redinarasha3229
@redinarasha3229 Месяц назад
Well done
@AutomotiveDiagnosis
@AutomotiveDiagnosis Месяц назад
Thanks
@autokiaa9563
@autokiaa9563 Год назад
Perfect tutorial, I have always had difficulty to do this. Thanks
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
Glad it was helpful 🙏
@fixitfirst7090
@fixitfirst7090 Год назад
Very helpful, Thanks mate
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
👍👍
@melissafoxx4271
@melissafoxx4271 Год назад
omg, ty for this and the other de-pinning video. I actually have work todo at the ECM connector and was beginning to think what the hell am I thinking. Now I have full confidence on doing this. It's actually an Audi TT, which just happens to have very similar 2 connectors to the 2 you showed.. Am now subscribing.. xoxo
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
Thanks for your kind comment and welcome to the channel, I'm glad this video was helpful👍👍❤️
@shawnpa
@shawnpa 4 месяца назад
Very clearly explained with basic tools. If you can teach it this simply, you really know what your talking about. Excellent.
@davidborch213
@davidborch213 Год назад
one of the best videos explaining this procedure
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
Thanks for your comment. I’m glad you liked it.
@GraditelMacedonia
@GraditelMacedonia Год назад
Awesome! Keep going.
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
Thanks a lot 🙏
@azizbrahim8354
@azizbrahim8354 Год назад
Thank you sir for your invaluable information
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
Thanks for the nice comment 🙏🙏👍.
@mohsenmohsen8514
@mohsenmohsen8514 Год назад
Thanks a lot for the good video
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
🙏🙏👍
@MrBluegooh
@MrBluegooh 3 месяца назад
Great video, you’re a legend, thanks for your time 👍
@AutomotiveDiagnosis
@AutomotiveDiagnosis 3 месяца назад
Thanks my friend. I’m glad you liked it.
@davecarpenter4917
@davecarpenter4917 5 месяцев назад
Great explanation and detailed views. Thanks and Cheers !
@AutomotiveDiagnosis
@AutomotiveDiagnosis 5 месяцев назад
Thanks 🙏
@mostafasniper6919
@mostafasniper6919 Год назад
Thank you man
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
👍👍👍
@ldsiverling
@ldsiverling 4 месяца назад
extremely useful.
@AutomotiveDiagnosis
@AutomotiveDiagnosis 4 месяца назад
I’m glad you liked it
@scienceandtechnology4310
@scienceandtechnology4310 11 месяцев назад
Nice work ❤❤
@AutomotiveDiagnosis
@AutomotiveDiagnosis 11 месяцев назад
Thanks 🙏
@zaltuwijri
@zaltuwijri 7 месяцев назад
very helpfull thank you.
@AutomotiveDiagnosis
@AutomotiveDiagnosis 7 месяцев назад
Thanks for watching
@ADVENTUREnGAMER
@ADVENTUREnGAMER 4 месяца назад
Thanks for the video, how do you remove the cover of the other T60 (I think) connector
@AutomotiveDiagnosis
@AutomotiveDiagnosis 4 месяца назад
Hi there, sorry that I don’t have the connector right now to make a video, but if you check the other video from the link below you might get some ideas as I described many different connectors there (it helps even if it’s not exactly your connector): ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gzf524fYAxE.htmlsi=oRWCqS2V7R4Tfnvk
@kirkcondon5996
@kirkcondon5996 Год назад
Great tutorial. I have been attempting to remove pins from a Lexus Anti Skid ECU, and pretty much have butchered the connector trying. What you are showing here for removing the pins from the ECM seems almost what i need to do with this ECU. Any assistance you can provide would be appreciated!
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
Hi there, I wish I had that car right now to make a video for you, sorry that I don't. Normally when I want to remove any pin, first I try to locate the locking tabs and anything involved. Then I select the best tool for that. There is another video explaining how to remove the pins from several connectors, that might be helpful too: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gzf524fYAxE.html
@vskk7144
@vskk7144 Год назад
Thanks a lot, it's very clear, Both ur audio nd video, but after depinning, showing atleast once the female pin hole where the male pin goes in would have been more great
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
Hi there. Thanks for your comment. I will try to do that in the next coming video.
@oscargarcia3983
@oscargarcia3983 10 месяцев назад
hello, does anyone know how to disconnect a connector with a broken release lever from an MBE 4000 ddec?
@rm-xu6hf
@rm-xu6hf Год назад
Nice video. How easy is it to insert them back into the connector?
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
Thanks. Yes. it is actually very easy. The only important thing is to make sure that pin is inserted in a correct orientation to be locked by the locking tab. You can also watch the following video which shows how to remove and install the pins from multiple connectors: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gzf524fYAxE.html
@rubenfilippus2956
@rubenfilippus2956 Год назад
Do you have any ideas on Mitsubishi pajero gdi v6 V25 6g74? I just cleaned the MAF sensor but it's just idling bad and i can't drive it it's just going
@rubenfilippus2956
@rubenfilippus2956 Год назад
It's just going off i mean
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
So engine goes off when it is idling? Have you cleaned the throttle body yet?
@rubenfilippus2956
@rubenfilippus2956 Год назад
@@AutomotiveDiagnosis yes i cleaned it with carburetor cleaner
@ks-su7qv
@ks-su7qv Год назад
Do you know how to take apart the connector's of bosch edc16cp19 the car is a Citroen c6 from 2007.
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
Hi there, I don't have the car right now to make a video, I'll check and let you know here.
@ks-su7qv
@ks-su7qv Год назад
@@AutomotiveDiagnosis already broke the connector hahah but thanks.
@madeinjapan3485
@madeinjapan3485 5 месяцев назад
Magneti marelli ECU connector on an aprilia shiver 750 anyone know how to depin one of them?
@user-fr9mt4vp1h
@user-fr9mt4vp1h 9 месяцев назад
Como puedo poner en orden los pines de una lincon nabigator de la caja de fusibles
@AutomotiveDiagnosis
@AutomotiveDiagnosis 9 месяцев назад
You need the wiring diagram to find and tag the wires one by one, also pins locations on fuse box.
@user-fr9mt4vp1h
@user-fr9mt4vp1h 9 месяцев назад
Caja fusibles del carro del tablero abajo de volante cada trae 31 cables no se la orden trae nemerasin los cables al final
@AutomotiveDiagnosis
@AutomotiveDiagnosis 9 месяцев назад
Hi my friend, search for the wiring diagram, it will help.
@seyedmahdiarabi3962
@seyedmahdiarabi3962 Год назад
👍👍
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
👍
@DarkIzo
@DarkIzo Год назад
👍
@louisvillalba7695
@louisvillalba7695 3 месяца назад
God bless you friend Jesus loves you ❤
@AutomotiveDiagnosis
@AutomotiveDiagnosis 3 месяца назад
Thanks my friend
Далее
🛠 How To De-pin Connectors | TECHNICALLY SPEAKING |
26:13
Я читаю переписки сына
00:18
Просмотров 663 тыс.
QVZ PREMYER LIGA
00:18
Просмотров 701 тыс.
How to Depin an ECU Connector
3:31
Просмотров 19 тыс.
What Is He Doing?!
0:11
Просмотров 12 млн
Malo vozim, malo punim 😉🤣
0:16
Просмотров 1,9 млн
Bike trick and Bro's aura...
0:11
Просмотров 4,1 млн