No video :(

How To DeBadge a RAM 1500

Подписаться 12 тыс.

Просмотров 51 тыс.

50% 1

This video is about De-badging your car/Truck. Easy way. It took me 2 hours to complete both sides on a Dodge Ram 1500.
I just started Instagram if you guys want to check it out....
www.instagram....
Subscribe. Weekly uploads.
DO NOT CLICK THIS!!! / bigdaddyshouse
MUSIC: Remember Anno Domini Beats
Still Standing Anno Domini Beats
Tools/Products used:
Dental Floss: www.amazon.com...
Heat Gun: www.amazon.com...
Microfiber Clothes: www.amazon.com...
Goof Off: www.amazon.com...
Rubbing Compound: www.amazon.com...
Wax: www.amazon.com...
In today's world this has to be said.......
Disclaimer: Due to factors beyond the control of "I" or big daddy's house, I cannot guarantee against improper use or unauthorized modifications of this information. "I" big daddy's house assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. "I" big daddy's house recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not "I" big daddy's house. This video is for entertainment purposes only.
Something else you might like....
• AlfaOBD OLED LED headl...

Опубликовано:

14 июн 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 72

@hazelthedestroyer5471 3 года назад

I just bought a 2021 1500 (my first brand new rig), and want to debadge it, but I'm scared shitless! After watching this, I'm feeling a little better about it. Thanks

@bigdaddyshouse 3 года назад

Glad I could help Max. Thanks for watching.

@USMC0331 Год назад

This helped me a ton as iv had my Ram for years old and my door emblem plating has partly discolored.

@blaircook1260 2 года назад

Thanks for this video! I just debadged my 2017 Ram today and this helped a lot!

@joe7528 2 месяца назад

The tailgate emblem does have 3 pegs as well as double sided tape

@kochj0713 Год назад

That double-sided tape is hectic PITA

@Graysonn95 2 года назад

Your videos have been so useful, really appreciate them! Your alfaobd video helped my DRL issue with these aftermarket lights I had that ran my high beams concurrently with the DRL. And for this video I'll be debadging my ram soon once my blacked out badging comes in, so it's nice to know how to remove them safely. It may hurt you to hear this but I personally don't mind the door billboard hehe

@bigdaddyshouse 2 года назад

Hey Grayson, sorry for the late reply! I'm glad my videos helped out and thank you for the compliment. I appreciate your support brother!

@jcb101-4 4 года назад

Zylol!!!!! Way better then goof off. Zylol takes off bugs, tar, paint, road grime pretty much anything. Including wax...so you'll have to rewax after use. We use it before every claybar/detail at our shop

@bigdaddyshouse 4 года назад

I'll have to check that out! Thanks bro

@NDSTraveller 4 года назад

@@bigdaddyshouse Zylol is a medication for gout. Xylol (xylene), however, is a powerful solvent/paint thinner. It definitely will remove all that stuff, but just be careful and read the MSDS. It will eat plastic, is extremely flammable, it will pass right through bare skin and into your bloodstream (cancerous/toxins) so wear chemical gloves if you use it. In addition to that, the fumes are toxic if breathed in, so unless used in a well ventilated area, you should consider a respirator. It's very similar to Toluene and in the same family of aromatic hydrocarbons (methyl benzine derivative)..... @jcb101 probably has all of the required PPE since it's a commercial shop and must meet OSHA regs, but for home use, I would stick with the Goof Off unless it isn't working for you.

@bigdaddyshouse 4 года назад

@@NDSTraveller Thanks NDS Traveler! So basically what you are saying, this is the "DIP" used in Who Framed Roger Rabbit! Lol Thank you for the great information and support.

@NDSTraveller 4 года назад

@@bigdaddyshouse You got it!

@MadManMadanJr 5 лет назад

I just used a plastic pry tool from HF and the emblems and adhesive came off with no problem. Took about 10 mins per side.

@bigdaddyshouse 5 лет назад

Lucky dog!

@Erix7810 Год назад

I just did a 2014 for a customer and it was a nightmare. That adhesive backing was like cement. Got it done but had to go back over it with a buffer to clean things up.

@KingN8Boogie 4 года назад

Currently watching this while I’m debadging my Ram. Same color as yours of course. Replacing mine with black emblems though

@bigdaddyshouse 4 года назад

Sweet! Are you in the RAM forum. www.ramforum.com/ If not sign up and post a picture of your truck finished, in 4th gen section (what did you do with your fourth gen this week). Then in your comments put @big Daddy's house so it'll chime me, so I can see it. That was a lot of words lol.

@hunter13605 4 года назад

Feeling the damage that car wash did to your paint made me cringe :(

@bigdaddyshouse 4 года назад

Sir, you're not kidding. If I had the camera on me while I was doing that footage you would see me cringing also.... I only did it cuz I thought it would make great footage. Thanks for taking time out of your day to watch and comment brother!

@hunter13605 4 года назад

big daddy's house I used to take my trucks to those kind of washes because it always came out cleaner than the touchless ones. Then I realized that was the cause of all the swirls in my black paint. Your videos are great. Definitely helped with the AlfaOBD modifications that I did to my 19 warlock. Wasn’t able to get global down to work but disabling fog light drop out was the best thing I’ve ever done. So much more visibility at night.

@k.a.c613 3 года назад

Big is an understatement, lol. I call it removing the billboard. I must have gotten lucky my truck is 6 years old and I live in canada and winter drive this bitch and my emblems and stickers came off with no problems with just some thin nylon rope and my thumb to rub off the stickers. It seems to be a lot harder for some people but don't let it scare you cuz nothin is scarier than that billboard on the door. Nice video and yes goof off will work just fine but I used wd -40 just to polish it up afterwards no need to buff either 👍.

@bigdaddyshouse 3 года назад

Hey K.A.C, I'll have to try that WD-40 trick! Thanks for the tip brother. And you're right about that badge being a billboard. It is completely ridiculous!

@dominic6283 2 года назад

I think Bug and Tar remover will work too

@bigdaddyshouse 2 года назад

Nice tip Dominic. Thanks for watching and your support!

@cagedbeauty444 5 лет назад

I love this! Easy way to remove and add an awesome emblem

@GENX80. Год назад

Rubber wheel 3inch polisher way to go

@bala3253 3 года назад

Good job

@bigdaddyshouse 3 года назад

Thanks man!

@jtommyprice 3 года назад

Emblem eraser tool takes that gunk right off.

@Pressingontoperfection 2 года назад

Cool vid

@hugopena9271 4 года назад

just saw this vid can you name what you said to add at the end in case i still see some shadow

@bigdaddyshouse 4 года назад

Hey Hugo, I was talking about low-cut polishing or rubbing compound. Any brand should be fine. I think I used Turtle Wax in my video. Hope this helps out brother. Thanks for watching and your support!

@elow305 2 года назад

Never put goo gone on your paint it will destroy the clear coat and leave a blurry white mark on your paint idk about goo off but goo gone will definitely leave a mark so becareful on what you apply to your paint

@bigdaddyshouse 2 года назад

Hey elow morales, thanks for sharing. I can tell you from first-hand experience, Goof Off worked for me and didn't damage the paint or clear coat. I made this video several years ago and the paint still looks as good as that day. You are 100% correct, people should do the research before applying any substance to their paint. Thanks for watching man.

@Erix7810 Год назад

I run an auto detailing biz and use goo gone all the time. Never had a bad experience.

@adanmxml9226 3 года назад

Big papi im trusting you with my emblem removal

@bigdaddyshouse 3 года назад

Hahahaha. You're in good hands HERNANDE! You're in good hands. 👍

@k.a.c613 3 года назад

Do it.....you'll love it.......

@hinsontacp 5 лет назад

Could you list the products you used in this video and where you purchased them.

@bigdaddyshouse 5 лет назад

Just updated my description. ☺ Thanks for watching!

@tlowc34 4 года назад

Plastic Razor Blades and 3M Trim Adhesive Remover will save you some time.

@bigdaddyshouse 4 года назад

Nice tip! Thanks for sharing.

@Kiwitakimago 3 года назад

You should’ve added video of the entire side of the truck(standing back)! Sorry but we can’t get the full effect!

@bigdaddyshouse 3 года назад

Sorry Diego541, I'll keep that in mind for future videos. Thanks for watching brother.

@adampesina9055 4 года назад

Is it the same process for a 2007 dodge 1500?

@bigdaddyshouse 4 года назад

Hey Adam, solid name! I want to say yes it is the same procedure for a 3rd gen, although I don't have experience with a 3rd gen, so I cannot say for a matter of fact that is true. You should ask this question in a 3rd gen Rams forum to confirm. www.ramforum.com/forums/general-discussions.45/ Thanks for watching brother

@gphilpot1 4 года назад

This makes me cringe remembering doing this myself. These RAM emblems are ungodly huge. I left the HEMI emblems.. 👍

@bigdaddyshouse 4 года назад

Greg you are so right! I mean, you can tell it's a RAM. it doesn't need to be a rolling billboard.... LOL

@k.a.c613 3 года назад

Gotta leave the hemi or people might think it's an eco diesel and we don't want that, lol. We always know that if you remove all the emblems it's probably a v6 or eco. 😉

@willhumphries7842 3 года назад

How long did that take per side

@bigdaddyshouse 3 года назад

Hey Will, sorry for the late reply man. If I remember correctly it took about an hour hour or an hour and a half each side. Depending on how new your truck is or if it had been sitting outside it may take way less time. Some even reported just pulling off the double-sided tape without any residue being left behind. Hope this helps out brother.

@jimwestbrook4068 Год назад

Hey dude, excellent video!! I followed all your steps, I worked amazingly. I would never in a hundred years thought about using dental floss. Brilliant!!. My question is for the final step regarding the compound. What did you use? Please pretty please respond.

@bigdaddyshouse Год назад

Hey Jim, that was a long time ago sir. If I remember correctly it was turtle Wax polishing compound. You can use any low-cut polishing compound though. Then you just wipe it ,wash it off and wax it. Thanks for watching brother!

@jimwestbrook4068 Год назад

@@bigdaddyshouse hey dude, thank you so very much. Respect sir!!

@normangettys76 4 года назад

I have a 2017 RAM, How long did it take to do 1 side?

@bigdaddyshouse 4 года назад

If i remember right about a hour. It may take you less time on your 2017 then it took me. I have a 2014 and the adhesive was really baked on. Thanks for the support Norman!

@11C2505PIR3BCT 3 года назад

Could you do the hemi emblem the same way?

@bigdaddyshouse 3 года назад

The front one or the back one Joseph?

@jimwestbrook4068 Год назад

If it’s the front fender the answer is yes. I just finished mine. 2017 ram 1500.

@frankmmiii 2 года назад

It is definitely okay to debadge a Ram, because there is no mistaking a Ram. I would not advise people to debadge their fords, chevy's, gmc's, nissan's or toyota's because you'll all get lumped into the same shit pile instead of your own individual shit pile.

@bigdaddyshouse 2 года назад

Hahahahahaha!!! Classic. Thanks for watching brother.

@jargero8203 2 года назад

That's the entire point of de-badging.... to keep the normies guessing what you actually drive... genius 🤭

@jordangryg5442 3 года назад

C clamp ! Lol

@bigdaddyshouse 3 года назад

Hey Jordan, You got me... I definitely meant to say C type snap ring. But a C-clamp would definitely work if you don't mind the intrusion inside the cab! Hahahaha

@likeatree-ei8it 4 года назад

Would a hair dryer work instead of a heat gun?

@bigdaddyshouse 4 года назад

Absolutely. just might take a little bit longer. Depending on how old your emblems are may not even need a heat gun or hair dryer. My emblems were almost five years old. Thanks for watching!

@grapas100 4 года назад

Just bought these in all black on Amazon. All the other badges are coming off . www.amazon.com/gp/product/B01MYZNZHP/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=UTF8&psc=1 P.S.: Does anyone know if the Ram 1500 badges on the driver's and passenger side are held on by tape or is there a hole in the sheet metal behind the badge?

@bigdaddyshouse 4 года назад

If it's a 4th gen..... I can tell you for a fact it's all tape, no holes.... 😉

@grapas100 4 года назад

@@bigdaddyshouse - Thanks.