HOW TO DELETE EGR LLY LBZ LMM DURAMAX 

Now this guy knows how to make a video. He didn’t try to act cool by cussing the entire time, he stayed with the subject at hand only and didn’t discuss a bunch of unrelated stupid crap. Really good video. I like it when people get to the point and get it done explaining along the way. Huge thumbs up

After watching this video I went out and started examining the situation a little further. Then I disconnected the EGR valve. Runs good so far.

New diesel guy here, you diesel mechanics earn your pay! Thanks!

Just wanted to say if no one else has. The LMM Duramax EGR cooler coolant hose is different. The delete kit for the LMM has a "U" shaped coolant hose to feed back into the heater core. Otherwise, great video and everything is spot on. Thank you!

This is an AMAZING video! High quality camera, very informational. Doesn’t show every single little detail which is nice because it explains what to take out and what order to take things out, and you don’t have to try to skip through someone spending 5 minutes to take off a bolt- which is always super annoying. That’s a thumbs up for me!

That is a real puzzle. You are a great technician. I have a LBZ classic. You might just go for the whole ball of wax once you are in there.

Good how to video. When I did mine I removed the body cab bolts and the core support bolt from the passenger side and jacked up the cab a couple inches. Gave me a lot more room to get those hard to reach bolts out and the down pipe pretty much falls out with the extra room!

Good thang my inspector doesnt look at anything. Just asks if my lights work 😂 i love NC

This is one of the most quality videos I've seen I will definitely be checking his channel for anything I need in the future

Watching duramax videos makes me very appreciative of my Cummins. Straight 6 just makes everything easier.

Great video man. Detailed and extremely helpful thankyou

This video was amazing; been in the learning process of learning my duramaxes and this was very straightforward with amazing technical details and insight, time for some slight weight reduction

Pretty good vid. Some recommend replacing up pipe bolts. The temp cycling weakens them. Supposedly the ARP are rated higher and less likely to snap. Yep use copper antiseize. Buy the kit of them or 12 needed ARP 672-1003(5pk), 12mm 12pt head M10x1.5 x 30mm flanged 180,000 Tensile 8740 chromoly OR the SS ARP 772-1003(5pk)

DeLeTeS aRe NoT fOr PuBLic RoAdS

Awsome vid, big help. Thank you again

Absolutely awesome video can’t thank you enough!

Very helpful video and key details, thanks brotha!

Sweet video man !!

Thank you . This was so helpful

Thanks brother I get a lot out of these. It reminds me of sitting around on Sunday morning watching Trucks with my dad.

Great videos, ! Last week a Ford off the frame. This week Chevy dilemma! You say what a struggle it is, but don’t show us you fussing and cussing! I think you should show us that part also. 😱 Are you going to make one with the finish on the install of exhaust? And the tunes with the test drive. I am not bashing you at all ! Just like to watch the in depth work you are doing! Awesome job! Thank you for the videos!

Dude this video is perfect. Just awesome thanks man.

Great Info, Well done fella!

Great video straight to the point

Thanks for solving some of the mystery of the D-max. I got a customer that's thinking about "going off-road" so this should help.

Great video!

MANY of the Diesels you see burning along the highway,,,,, are the result of pulling the turbo heat shield and shit canning it. ALWAYS put the turbo heat shield back on, ALWAYS! GREAT VIDEO, Found exactly what I needed to learn on this one!

Great video and love the name!

New sub here just bought 2005 3500 duramax thanks for the info

What were the parts that you bought for this? I have a 08 lmm and want to get rid of my blocker plate and do it right. All I have it the blocker plate and the egr shut off with my programer.

Awesome video thanks for doing it after you did the EGRand down pipe did you have to use a tune on it and if so what do you suggest as a in expensive tuner to buy for a 2006 GMC Sierra 2500HD Duramax 6.6 LLY.

Great video! How many labor would you say this whole thing took?

I have a 2008 drum ax diesel I'm doing a full delete can I leave the stock muffler and the stock catalytic converter on . I bought the bypass tube for the Particular filter. Do I have to worry about them stobing up or should I just replace them. Love your videos.

Great video very detailed thanks for doing it. 👍 Can you tell me what device I can use to put a basic tune afterwards on it not looking at increasing HP just to eliminate the engine light being on and where did you get your EGR delete kit from.

Are you able to do the new Duramax's if someone would be interested in turning one into a competition rig only

Did the whole thing off this video mint video !

Dude I found out I got oil dripping from that hose you pulled off to drain coolant could there be oil inside?? I check the coolant up top but seems fine and my oil level is fine any ideas???

Nice video. Concise

I just did the delete and everything went well. Only question I have is which plug goes to the coolant and which goes to the A/C? They appear to be the same type of plug only difference is one set of wires is shorted than the other. Thanks

I need help on my wiring putting all my sensors back because I did a egr and egr cooler delete and a new y bridge kit and I can't figure out which sensors get plugged back in and which ones don't get plugged in and i can't figure out which one goes to my air intake because I put it in and non of them go that far up

Now, to find someone that wants to do this to mine. I have 2 cars I’m building, no more patience for another project

Great video on kit, but isn't there programming involved too software delete EGR?

Thanks, great info.

Can you do a full EGR delete on a 2005 LLY with stock tunes? I see it may go into limp mode?

Does doing the egr delete make you blow more black smoke I’m trying to stay clean don’t wanna waste fuel at these prices

Bro you are awesome.

Great vid man. Looks like it was a lot easier than on the LML 😂

Excellent thanks bud

Since you mentioned that customer wanted to save money by capping & reusing the stock passenger up pipe, is it fair to assume that's why you capped & reinstalled that factory cooler pipe too?

Watched several different videos on options for an EGR delete, and each one look like a crap load of work, with several problematic steps... With different varieties. I’d like to do it one day, but When & what way I want to go? And having the energy & patience- as well as time to get it completed successfully, not to mention the need for a tuner, aftermarket exhaust, etc... I may leave mine alone for a bit longer.

Why is the website under shop private? I can't seem to find in stock parts to do this anywhere.

The heat shield can be bent and removed, then just bend it back once you get it in position for reinstall

great video

Great video, followed step by step but my engine light still on??

THANKS BRA!

I'm new to diesel engines ( durmax) . What is the EGR for ?

Indian head everything going back together lmao Real good vid man

Does this make it run better?

the disclaimer. LOL

Great video! One question, how many miles on this truck before the cooler was removed? It's crazy that much soot and crap can build up in the ports.

Just ordered efi live from dirty diesel for my 05 lly. The old ppe i was using killed my ecm

What about the wires connected to egr? Leave them unplugged?

Dexcool is know to cause head gasket failure on gasoline engines. Do you continue to use in a Duramax or do you switch to green antifreeze?

I know this video is a few years old, but the routing of the coolant line for an LMM is a little different than the LBZ here. It comes with a U hose that attaches to the line right next to it, instead of coming down across the engine.

Where you get the mirrors from???

Looking at deletes for an lbz. Looks like a great time to pull my turbo and clean it at the same time.

Hey man. So I got my stuff off. Lol man 😂🙈 I tried the whole stubby 12mm and pry bar thing… dude how in the world can you make that work. I tried prying over the battery and no leverage and awkward. And being one man it’s even crazier. So I want to see you do a video and show you doing that step man! That would be gold. But I got mine off pretty darn easy. Got both off same way. From bottom through wheel well with a regular old socket wrench. I used one that was 3/8” swivel head with a standard short 2.5” extension and 6point 12mm. Y bridge and up pipe is next! Been doing it in steps and making a video.

I always put new bolts in as I remove the old bolts so that all the pressure is not left on the last bolt

05 chevy 3500 6.6 dually is it delete able?

Down south they don’t have Emissions laws Arkansas don’t even have inspections

Does this throw a check engine light?

Where do you get a deleted tune now

How much do u charge for a job like that

Want to do a DPF and EGR delete on my 08 LMM. Are the sinister delete kits OK. I have cracked up pipes I think. I can smell diesel exhaust coming in my heater. Can the bellows be repaired or better to replace them. What are the best ones to use? Is Sinister OK? 200,000 miles.

Kind of unrelated, but can you still get an egr and dpf delete on EZ lynk? I thought they were forced to stop producing that

Nice!!

Great video. What about the truck tuning. Is it required for deleting this way

Always tighten bolt slightly then they'll break loose with your best chance of them not breaking.

Canadian companies might be the only ones with the ability to keep these older dirtymaxes on the road.

Ty

I am new to diesels and just purchased a 2004 2500HD duramax (it's LLY) with 159000 miles on it. Would you recommend doing an EGR delete on these older models. Would it be too late meaning damage has already been done? Can EGR delete rectify any problems that have built? I do not know if this year has them?

This may be a stupid question, but is it absolutely necessary to remove the egr cooler or could I get away with just the blockoff plates?

Hey man i have 2009 duramax what is a good programmer that you cand recommen

What is the kit you recommend with a high flow intake?

I am new to diesels and just purchased a 2004 2500HD duramax (it's LLY) with 159000 miles on it. Would you recommend doing an EGR delete on these older models. Would it be too late meaning damage has already been done? Can EGR delete rectify any problems that have built? I do not know if this year has them? thx for your vids

Who did you have do your tune I am having a hard time finding a reputable dealer to EFI live my off road truck to EGR Delete. I have a lly

Highly recommend the new up pipe, I did the blocker plate and my up pipe cracked in less than a month.

hello, i need programing?

👍👍👍💯💯💯👍👍👍👍 This is a great detail video

Should I tune the truck first before I delete the egr? What would happen if i do the delete without the tune?

what all do i need to order to do a full delete on my 07 lbz im pretty new to the duramax world

New duramax owner, what's the point on doing this delete?

Very important. How does someone who does not work at a race track, go about driving his "race track truck" to work everyday? Asking for a friend.

Did you have a check engine light in dash once you delete egr?

great video, but why not finish taking the fender liner off, that drove me nutz

Anyone know if this will work for LB7? With California mission standards. Only has EGR, its an 04.

Where did you get the kit at

Hello dark iron diesel . What would be rhe cost of building a bulletproof 2000 hp lly 2005 . I want it done right . As bulletproof as can be . What yoh think it will cost for materials and labor I want pros building mine

If you do this delete do you have to tune your truck??

How can u know which one u have? ...I have a 07 classic dmax