How to Design and install Chair Rail + bead board / wainscoting

Подписаться 976 тыс.

Просмотров 486 тыс.

50% 1

Check out this video on designing and installing bead board or wainscoting. I did this project for my kitchen and it looks great and it's a great do it yourself home project. I'll show you the material list, measurements and tools you'll need.
jig link - • Simple Circular Saw Ji...
link to Q & A video - • Q and A on last weeks...
www.jonpeters.com

Хобби

Опубликовано:

13 мар 2014

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 157

@jomcdonald9983 Год назад

MUY buena calidad, el texto imagenes. ru-vid.comUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO Un manuel muy completo y trabajado. Resulta muy práctico. Para principiantes y profesionales. Lo recomiendo

@AaronK910 6 лет назад

I’ve watched quite a few how-to videos on RU-vid and yours are by far the best. You don’t cut corners and you explain things thoroughly. I plan on using this video as a guide when I install bead board my powder room. Thank you!

@riverasbuild943 10 лет назад

At first I thought you were ripping birch plywood but then you did that close up on the poplar. Very neat work Jon as usual. Thanks for sharing. I know a bunch of people will get good use out of this video..

@haroldbartley5970 6 лет назад

Nice project! Always adds a nice touch to a room with little effort. I like nailing in the groove of the bead, then I don't have to sand the little mound you get from nailing into mdf.

@Jeff-Champwild 8 лет назад

Jon I swear you're the master of the miter joint. You make it look effortless!

@JonPetersArtHome 8 лет назад

Thanks Jeff....appreciate it.

@joefromottawa 7 лет назад

Great content. I appreciate Jon taking the time to film and edit.. great entertainment

@KyleSoldani 9 лет назад

Great video Jon! Subscribed from here on. Beginning a beadboard project in our kitchen and half-bath thanks to this guidance.

@michaelr7110 10 лет назад

Thanks for sharing Mr. Peters! -- Almost didn't see it today, as I was on my way out the door from the office and decided to check for updates! Thanks again!!!

@ianfarrow8474 10 лет назад

First class job again Jon, done with your usual effortless skill.!!!

@joshuapruden6497 8 лет назад

Great Video. I felt like i was watching This Old House. Great Editing, Great Cameraman.

@CindyOrangeNeely 10 лет назад

I'm planning on doing this in my bathroom next week and I figured it would be an easy project. Thank you for the video!!

@JonPetersArtHome 10 лет назад

That's great, good luck with the project, really makes a big difference

@thekeith1221 10 лет назад

Great job john. It looks real nice

@michaeljbreault 10 лет назад

Thanks for the detailed video Jon.

@woodyssawshop266 6 лет назад

Very Nice Job! These ideas will help with my first bead board project. Thank You..!

@imtiaziqbal3041 6 лет назад

Thanks for this video. Really helped me to do the project. God bless you!

@koteek8657 5 лет назад

Thank you for making this video! Very helpful.

@WayneWBishop 6 лет назад

Once again - perfection! I've done some wainscotting in the past, but this will my first attempt with beadboard. Starting to wonder what percentage of my house you've indirectly allowed me to remodel. Thanks for the great work!

@TheJUiCy1117 6 лет назад

Awesome video, definitely going to do this to my kitchen. Thanks

@margaretpervier8357 5 лет назад

You do beautiful work!

@alexmoulding1501 10 лет назад

Nice detail added here on this wainscot panelling!

@MsBess100 4 года назад

So helpful and well done. We are currently redoing the walls and trim for our 1940s bungalow DIY.

@JonPetersArtHome 4 года назад

Thank you! I’m glad to hear and good luck with the project

@priceypads 9 лет назад

Beautiful Job! Plan on doing this in my family room.

@JonPetersArtHome 9 лет назад

priceypads Thanks

@TheChrisPineWorkshop 10 лет назад

really looks good!

@mrchromaticable 10 лет назад

Love the colour of the walls

@twistedscissors2 9 лет назад

Amazing work Jon.

@JonPetersArtHome 9 лет назад

Thank you, appreciate the comment

@MrAmagaska1976 8 лет назад

awesome video Jon thanks very much

@dorseydorseyG 9 лет назад

you lead, and I will follow ! I think you have got your act together.

@lancekelly8352 7 лет назад

beautiful work

@ewar2066 8 лет назад

awesome job... can you make a video on how to hide the seam where the boards join.. did you end up painting the panels? thanks in advance Tom

@alatinaa9068 8 лет назад

Very nice work..............

@lolamattiello4879 7 лет назад

Also, amazing job on the video and the finished product looks great!

@JonPetersArtHome 7 лет назад

Thanks Lola

@JonJon-gu7xy 10 лет назад

Another good video. Thank you.

@gremlinsbreath 10 лет назад

How would you handle an uneven wall at the corners? We live in an older house and settling has made most of the walls out of whack to some degree. This is very apparent when one wall intersects with another when dealing with vertical lines.

@JacobsenBros 8 лет назад

What did you do with that outside corner? did you just overhang and paint?

@BrianS2464 9 лет назад

You're too humble. The video was great. I'm going to do this tomorrow.

@JonPetersArtHome 9 лет назад

Thanks Brian, good luck with project.

@permathisen4142 7 лет назад

Brian TX

@TwylaWorld 7 лет назад

HI! If I don't have the baseboard installed yet, should I bead board then put up the baseboard? Thanks for an awesome tutorial!!

@formbyjim Месяц назад

Great tips , thanks.

@peterwormald8904 6 лет назад

Hi Jon , I've messaged you before on this job, I've completed the whole room (looks great) and built in a loose panel/ access door for heating unit which has bowed out a little. Any thoughts on how to prevent, remedy it🤔 cheers P

@samip8213 9 лет назад

Hi great job! I have couple questions. Was the bottom molding over the baseboard just a preference? Could you please explain how to do the corners? Do I simply cut them at 45 degree angles?

@jew0182 6 лет назад

I’m looking at doing this around our dinning room with mdf wainscoting/beadboard as well as pvc wainscoting in our bathroom. Can you use liquid nail to adhere the material to the wall? Also are you nailing directly into the dry wall? I know you mentioned on the end of that one run there wasn’t a stub so you cross nailed to hold in place till the glue dried..? Thanks!

@DanielMatthews2000 10 лет назад

Jon, thank you for the video. You make it look easy. Hopefully my project will turn out as well as yours. What gauge nail gun are you using/recommend? Did you shoot into only the studs (besides the end with no stud)? How do you do the corners with the bead board (internal and external joints)? Thanks in advance!

@thomasdavid3990 7 лет назад

What type of wood did you use for the trim. Do you have a cost and what was the final height for the top rail? It looks great

@liverman16 9 лет назад

Great Video. Thanks so much!!

@JonPetersArtHome 9 лет назад

Thanks

@williamoconnell4696 5 лет назад

It was a great job I wish I had that Talent it saves thousands of dollars

@Spencerfoto 10 лет назад

Hey Jon, when you get to an outside corner with the beadboard, do you miter the beadboard to make it fit nicely, or do you have to put a corner molding over it?

@tomnewell6651 8 лет назад

nice simple moulding but so effective

@Petesbrobob 6 лет назад

Great job

@scottc8448 6 лет назад

Thanks for the video. I'm curious if you had to extend the electric box or use spacers for the outlet screws? Also, if you were putting this on top of baseboard heater, would you still use a toe molding? Thanks!

@JonPetersArtHome 6 лет назад

Thanks, I don’t remember but I didn’t think so. . Maybe ad a 1x2 on top of the base board heat

@tutifrutinumber19 10 лет назад

Good job. ♥

@johnnylightning1967 3 года назад

Nice work

@MichaelZittel 9 лет назад

Thanks. Question. Where the bead board wraps around a corner to the door did you miter the long edge at a 45 degree angle to get a seamless connection? I ask because that is what I plan on doing, but am concerned that MDF bead board with splinter and chip.

@dougchaffin2608 6 лет назад

Same here. I'm planning to use corner molding. Not going to risk the edge being wavy.

@AlbertMaruggi 3 года назад

great job

@petergifford5872 8 лет назад

Hi, want to ask about finishing nail you use with the nail gun. I built a cabinet the other day and I use a 1" finishing nail to hold it together but it came apart any tip on how and what happen why it came apart on me?

@alexandermilosevic_ 6 лет назад

Jon, how do you deal with walls that aren't necessarily perfectly flat (slight warping) or is that not a big concern?

@SarasSmile3 9 лет назад

Hi! Really enjoyed the video. This is almost exactly what I would like to do in my dining room. Now, I am very inexperienced in this type of improvement and have limited tools and money. The dining room is small and there is an existing chair rail and baseboard molding that I would prefer not to remove/change if possible. Is the project do-able with out removing these? Thanks!

@Delius6699 9 лет назад

Mary LoPreste Home Depot sells textured beadboard wallpaper that looks just as good as the real thing, and is much easier and cheaper to install. You can also order it online, and search for videos and articles on how to install. You can easily work around your existing molding, or get ready-made molding that they will cut for you at any home improvement store, or just get an inexpensive miter box! I did my entire stairwell top to bottom with the beadboard wallpaper, looks beautiful!

@itsmenckgonzalez 10 лет назад

Any chance we can see before and after shots of the painted kitchen cabinets?

@orchardfamilychannel9785 5 лет назад

My walls are not square and so what is the best way to fix corners when adding beadboard to the walls.?

@alexkras23 9 лет назад

Jon - my bathroom is odd-shaped. I am comfortable cutting the molding/chair rail at the measured angle, but what would be the best way to meet the beadboard on that unique angle to avoid an obvious seam? Much thanks, Alex

@uncleSamsites 10 лет назад

How did you fill the holes left by the nailgun? Just paint? Did you use poplar for the molding? Thx for the Nice video Jon! Thanks!

@tomoliva3723 Год назад

what will yield the best look installing beadboard when there is hot water baseboard heating. Mine runs full-length of the adjoining walls

@loricurtis3850 7 лет назад

This is great, thanks so much for that, Can I use a hammer instead of a nail gun?

@priscillawatson5876 6 лет назад

which paint did you use? I hesitate to finish with gloss. Thanks!

@halk7636 2 года назад

Hello sir! Can you please advise me? Im not sure what can be done about the beadboard MDF that i added along the long wall facing the outside in my basement. It seems to have expanded and is wavy now. Apparently there are supposed to be joints in between the boards but I didn't know of this issue previously. And I watched few videos and no one left any gaps between the boards. Thanks!

@Msleelee9487 4 года назад

finished my whole hallway except for a small corner behind my den door do I do one straight chair rail and 45 the small piece and cope to the straight piece already messed up a couple of boards the other corners wasn't hard this small one is don't want to leave it unfinished Thanks!

@andrewhanson1180 4 года назад

Perfect!

@lyndonp6296 4 года назад

Which type of glue did you use to mount the beadboard to the painted wall ?? Looked like PVA wood glue ?

@nickk1502 10 лет назад

Great little face lift. Looks great! I'm looking to purchase a chop saw and I'm torn between the 71/4 blade to the 10". Any advice on the size of the blade for a miter saw? Awesome job!

@markw3598 7 лет назад

12" slider is the best.

@benvolio1987 10 лет назад

good work :)

@Skylyned 2 года назад

Not sure if you mentioned it, but are you using standard wood glue for the beadboard on the wall?

@crod279 3 года назад

What do I do when passing a low window? Is there a trim I need to do? Do I go into the sill?

@romeobravo78 5 лет назад

Jon, great video. I am planning on doing beadboard and a chair rail in the nursery, but I would prefer to not remove the existing baseboards. Is it possible to do this project without that step?

@JonPetersArtHome 5 лет назад

Sure if the base board is big enough and will still have reveal that looks good.

@nathandeneault5778 9 лет назад

Hey good job man!

@kyek8246 10 лет назад

How did you make and attach the Fence system you have on your chop saw?

@gsh319 5 лет назад

Hey madman, I've watched so many of your videos I cant remember where you covered it, what's a good trim level airless sprayer for cabinets of trim work?. I'm not looking to paint walls, only trim work and cabinet projects. Any thoughts of suggestions? Rich on Finish Carpentry has shown a few reviews, I'm interested on your thoughts...

@JonPetersArtHome 5 лет назад

Thanks I’ve always used a brush to avoid all the prep so I really don’t have a good answer

@markw3598 7 лет назад

How do you trim around windows?? No one ever seems to show that part!

@fatguywithadrone1873 4 месяца назад

perfecto!

@rcjunkies816 7 лет назад

what kind of glues and size of nails on oulet u add bigger screw

@terrycorter6162 4 года назад

What type of blade did you use on the circular saw?

@cejkwo100 10 лет назад

Jon,I noticed you use wood glue to adhere breadboard to wall. I would of thought construction adhesive.

@dienekes4364 3 года назад

I just watched 2 Home Depot videos about installing wainscoting and both just glassed over dealing with power plugs. The 2 seconds that were shown here was much more detail than they went into. If someone followed those, they would have plugs that were inset back into the wall so the cover would never go over them.

@backtheblue280 5 лет назад

What did you do about the seams??

@KalanyMightBeADawg123 7 лет назад

I am getting ready to purchase our first home. And I want to do this from the living room to the dining room. Since they are combined.

@renaissancemen1 9 лет назад

Gremlinsbreath had the same ? I have. Uneven inside corners I just scribe. It's the outside corners. I saw briefly that you just did a butt edge. How do you finish that? I haven't cone across one outside corner that is 90 degrees.

@JonPetersArtHome 9 лет назад

I’ll try to make a short video on that, it’s difficult to explain.

@jaredhall1299 5 лет назад

What size is the base board without the cap? 1 X 4?

@robira1313 7 лет назад

Was that just normal Titebond glue that was used behind the beadboard? ...or is there a special kind of glue to use for this application.

@JonPetersArtHome 7 лет назад

+Rob I just wood glue, works great

@vvtubevvv 10 лет назад

Enjoy every sandwich. Cool.

@shiijon23 8 лет назад

Can I buy all the molding and board at Home Depot pre-made? Can I buy it and install it myself with glue and nail gun? (Trim nailer)?? Great video. Thanks for posting.

@markw3598 7 лет назад

Yes.

@joeguida3156 7 лет назад

I dig the Warren Zevon reference as well as the woodworking, heh

@JonPetersArtHome 7 лет назад

+Joe Guida Thanks Joe, got to love Warren

@sQWERTYFALIEN2011 7 лет назад

I follow Zevons advice .

@jameshoward3071 4 года назад

What about the nails on the seams how do you fix that or hide them

@adamroman8242 10 лет назад

How do you handle the small holes left by the nail gun. Do you individually fill them all up or do you have a faster/easier technique? Thanks!

@nholt 9 лет назад

***** after spackling / joint compound the nail holes do you paint the bead board and trim?

@matthewpoteet8876 7 лет назад

Were there any concerns about pulling the receptacle that far out of its box and perhaps exposing the area where a hot connection would come in contact with wood? @4:42

@davidstraight4258 6 лет назад

Yes, he should use a switch box extension so which would keep the receptacle away from the wood.

@wagil90 9 лет назад

can you paint the mdf bead board?

@JonPetersArtHome 9 лет назад

sure

@wade2361 Год назад

Came for the wainscoting, commenting because of the Warren Zevon quote. 👍

@kcorpora1 9 лет назад

Why is it necessary to use glue on the walls?...If the board even needs to come down or a mistake is made putting it up, then it would rip the walls up removing...Thanks for a response.

@HotWingzzzzzzzzz 8 лет назад

im a beginner...but it would be nice to make your own trim board and chair guards. .cool vid

@peterwormald8904 6 лет назад

Hi, could you tell me the type of adhesive you've used🤔

@JonPetersArtHome 6 лет назад

+peter wormald just wood glue .. works great

@mr.e-manm5062 3 года назад

What is the right height for a chair rail?

@georgetteliquorie123 8 лет назад

i live in maryland were can i find a good carpenter thanks

@nataliaschroeder9187 10 лет назад

Hi Jon, I am hoping you can help me with this question. I am installing bead board wainscoting in my son´s bedroom and have a dilemma. He has a reach in closet, and it is about three inches further back than the main wall, leaving a small wall. This wall has a round edge, so I do not know how to put the wainscot in this area. Could you help me out with some suggestions? I greatly appreciate it. Regards, Natalia

@JonPetersArtHome 10 лет назад

Sounds like you are saying the corner bead on the sheet rock is round, if so just trim as you would any corner. There will be a small gap at the top of the chair rail that will need to be filled. Hope the helps.

@nataliaschroeder9187 10 лет назад

***** Thank you Jon for answering so quickly, I think that would work perfectly in most cases, but I kept my original baseboard and that goes around the corner bead. If I do it that way I would be having a protruding edge at the bottom, correct? I hope I am getting the terms correct. Thanks again!

@JonPetersArtHome 10 лет назад

really hard for me to know, sorry