How to Design and Polish Custom 3D Printed Dice

Подписаться 25 тыс.

Просмотров 15 тыс.

50% 1

Learn how to design, print, sand, and polish your own set of custom 3D Printed Dice! Nothing like a custom Comic Sans dice set to set yourself apart from the other players.
Rybonator's "How to Set Up & Support Your 3D Printed Dice": • How to Set Up & Suppor...
Download the Comic Sans Dice set: www.printables.com/model/2144...
---------------------------------------------------------------------------
Find more information and use these affiliate links to help support this channel:
🔸Longer Orange 4k: s.zbanx.com/r/T0kMSg7TlqFF
You may also be interested in:
🔸Longer Orange 30 3D Printer: s.zbanx.com/r/dIrS4EAvAGQq
🔸Longer LK4 Pro 3D Printer: s.zbanx.com/r/7QHMo5X6jffT
---------------------------------------------------------------------------
Materials used in this project:
Micro-Mesh 2" Polishing Pads: amzn.to/38mGuuK
Meguiar's PlastX Polish: amzn.to/3GmhrVr
100 Pack Nitrile Gloves: amzn.to/3PLye8p
Wet-or-Dry Sandpaper: amzn.to/3lMwqyf
Anycubic Wash and Cure Station: amzn.to/3Gr8E4h
Anycubic Clear Resin: amzn.to/39ZbNMS
Anycubic Grey Resin: amzn.to/3LTVQVc
Anycubic Aqua Blue Resin: amzn.to/38tc4as
---------------------------------------------------------------------------
👀 See my recommended printers, filament, and accessories on my Amazon Idea Lists!
🆕 3D Printing Equipment for Beginners: amzn.to/2PNblSL
⚡ 3D Printing Equipment for Intermediate Hobbyists: amzn.to/2OOuQOy
💯 3D Printing Equipment for Advanced Users - Liquid Resin SLA/DLP: amzn.to/2PpqWuK
🎁 See the TEVO Tornado on Amazon: amzn.to/2TnhQhn
🎥 Hoffman Engineering RU-vid/Video Equipment - See on Amazon: amzn.to/2O9oP9I
🆕 Microphone - Sennheiser XSW-D Lavalier Set w/ ME-II - amzn.to/2F6ORYY
Thank you to all my Patreons for helping make these videos possible.
Special thanks to my tier 2 and above patrons:
* Alexandra C.
* Aaref A.
* Carl
Christopher Hoffman
Hoffman Engineering
www.hoffman.engineering
[0:00] Intro
[0:14] Making a design with DiceMaker
[0:58] Adding Supports in Chitubox
[2:46] 3D Printing
[3:32] Support Removal
[3:57] Sanding Materials
[4:35] Sanding
[5:28] Polishing
[5:41] Results
#ComicSans #Resin #HoffmanEngineering

Наука

Опубликовано:

1 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 24

@connorkeefe 2 года назад

This was the exact video I was looking for! Wanted to start printing my own dice but most of the tutorials on yt were pretty old. Didn’t even know about that dice designer program either. Great stuff 👍

@DaVid-ju7ee Год назад

Very nice, gonna try it today with a lower layer height (maybe 30 microns) to reduce sanding time in the first step. Edit: Safety first when handling resin: Always wear at least nitrile gloves and a respirator until the dice is clear coated. Printed with ABS Like Elegoo Clear and Ink dyes, your workflow is good. Layer height is irrelevant because of sanding but have some light of delay to let the resin move fast enough. I had some voids and bubbles but very sharp corners and a very glossy surface. Polish as fine as possible if you are gonna paint the numbers and wipe the paint of in order to get no paint smear. Finish with spray can clear coat, Airbrush clear coat or a thin layer of epoxy.

@knox4oh7 Год назад

3d print a set with a nice thick support on a corner, then after wash and cure, don’t cut the big support and then make a silicone mold of them, then you can make some really sick custom designs with resin and other stuff.

@joelwitherspoon930 11 месяцев назад

Great and simple video

@Thesaltymaker 2 года назад

D12!! Favorite.

@IcsulX Год назад

wow, you really misaligned the corners on that D8

@fossilis1337 8 месяцев назад

When slicing, what settings were you using?

@danteinferno6513 2 месяца назад

Thank you for these advices ; I tried to do like you did for supports and printing, but my print failed ; with sunlu abs like clear resin ( 1.7 s time exposure) I had very ugly faces on build plate side : warping and blurry numbers... Do you have any tip to fix this?

@vexy1987 Год назад

Might be worth buying a set of 40 dice from my table top gaming after all. 😂

@richardmolano5538 2 месяца назад

Can I play Dicemaker on my chromebook?

@brannorm3531 2 года назад

You can skip each step in the video by putting the model into the preheated resin and then curing it again

@cream3148 2 года назад

do you mean the sanding/polishing parts?

@brannorm3531 2 года назад

@@cream3148 yes

@lucasrezende7214 3 месяца назад

Yeah, but then you won't get those lovelly razor sharp edges.

@HB-hg7xq 4 месяца назад

Can you make this with PLA filament from a traditional 3d printer?

@jnc09 2 месяца назад

my question as well.

@174zuke 4 месяца назад

I have a question on the fin supports. The Dicemaker program has a built-in function to add them automatically. Is there a reason you're not using that? I've been trying to print a die in clear blue resin on a Phrozen Sonic Mini, but I haven't been getting good results. The numbers aren't coming out quite right, and the faces nearest the build plate keep warping. I've been doing these at 0.75mm deep, so maybe I need to go to the full 1mm?

@HoffmanEngineering 4 месяца назад

The program didn't have fin supports when I originally made this video, an update added them shortly after I believe. It's great seeing the program still being worked on. Unforuntatley I don't have advice for number depth. I don't remember the depth I used, but I should have done deeper. I remember sanding a few of numbers off during the polishing stages.

@RockoShaw 5 месяцев назад

is there an easy way to paint the numbers?

@lucasrezende7214 3 месяца назад

Paint before sanding, use nail polish or collored UV resin and fill in the numbers, then when you sand them down the nail polish will level with the dice's faces.

@TheRealComboacer 3 месяца назад

After polishing, just fill up the numbers with a bunch of paint and then wipe off the excess with a finger or a paper towel! Since it's polished and glossy, the excess paint will just wipe away without sticking