How To Design Load Flow Analysis in ETAP Software ? | Dr. J. A. Laghari

Подписаться 17 тыс.

Просмотров 19 тыс.

50% 1

#ETAP #etap #etaptutorials
In this video tutorial, how to design Gauss Seidel load flow analysis in ETAP Software is presented. For this purpose, I have considered an example from the Book Power System Analysis by Hadi Sadat, Chapter 6, Example 6.7.
I have discussed how to model slack bus, P-Q bus and how to connect loads and transmission lines between the buses. By doing the same way, any power system can be designed in ETAP software and its load flow analysis can be performed.
The Link to download the IEEE 5 Bus Simulink Model: drive.google.c...
=================================================
#DrJALAGHARI RU-vid Channel is a platform where you can find two main source of learning.
1. Electrical Power System Made Easy Videos: In this channel, you can find very informative and easy learning videos on electrical power system subjects such as Electrical Power Transmission, Power System Analysis.
2. Software Tutorials on Electrical Power System: In this channel, you can find very easy tutorials on modelling of electrical power system in various software's such as power world simulator software, MATLAB Simulink software, PSCAD software, ETAP Software, MULTISIM Software, Digsilent power factory software, LABVIEW software, and PSPICE software. Last, you can find very conceptual videos on various mind blowing questions asked in Electrical Engineering Interviews. ==================================================== #powersystemanalysis
#MATLAB
#matlab
#powertransmission
#electrical
#engineering
#powerdistribution
#powersystem
#powerprotection
#powergeneration
#ElectricalEngineering
My Website link: sites.google.c...
My Facebook Page link: / jalaghari1
My Linkedin Account: / j-a-laghari-b5825025

Опубликовано:

11 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 42

@cbsuresh5631 Год назад

Thanks dear sir. I have down loaded as per your instruction successfully. Running in my system.. Thanks fr clear instruction &valued class.

@DrJALAGHARI Год назад

Thanks for the compliments.

@vrutikkadam8397 Год назад

Thank you very much sir I had my viva today this helped me a lot 🙏🙏

@DrJALAGHARI Год назад

Thanks for the compliments.

@nazmulhaque4481 3 года назад

thank you very much. want more videos on short circuit analysis, Optimal Sizing and Placement of Capacitor Banks in Distribution Networks etc.

@DrJALAGHARI 3 года назад

Thanks for the compliments. Yes sure. I am working on it.

@farhan.mukhtiar 2 года назад

One of the great sir i really appreciate you sir ji bcz i can get much more whatever i want thank you for that

@DrJALAGHARI 2 года назад

Thanks for the compliments. Do share it within your circle too.

@polerma 3 года назад

muchas gracias, saludos desde colombia, sigue asi amigo!!!

@DrJALAGHARI 2 года назад

Thank you so much for the compliments.

@ASIFKHAN-ui7jp 2 года назад

Sir very well explained, please make more such videos. Thanks very much appreciated.

@DrJALAGHARI 2 года назад

Thanks for the compliments. Yes sure.

@jasonmichael5245 Год назад

Thanks a lot Sir. It helped me. Now i want to ask how use generator as PV (PV bus)

@DrJALAGHARI Год назад

Thanks for the compliments. You may see the built-in example's in ETAP and check the settings of PV bus.

@jasonmichael5245 Год назад

@@DrJALAGHARI thanks. Finally i found what i need

@DrJALAGHARI Год назад

@@jasonmichael5245 most welcome

@TheWorldofEngineers 2 года назад

Great Work Sir please upload more videos of Load flow analysis on Etap

@DrJALAGHARI 2 года назад

Thanks for the compliments. Yes sure.

@nometalgearr Месяц назад

Why initially you set up the slack bus to be 1.05kV and the nominal operating voltage at 100% then changed them around mid way in the video?

@DrJALAGHARI Месяц назад

Thanks for the comment. The initial voltage for the slack bus is 1.05pu.

@izharussalam4658 2 года назад

Sir please upload more videos of Load flow analysis on etap. Is it possible to perform "Forward and backward sweep method" on etap?

@DrJALAGHARI 2 года назад

Thanks for the comment. OK I will try to make videos on this topic as soon as possible.

@luismenezes2540 3 года назад

Great video, Thanks.

@DrJALAGHARI 3 года назад

Thanks for the compliments.

@Z-QUIZShorts-th5tx 11 месяцев назад

which is best software for analysis etap or Power world simulater?

@DrJALAGHARI 10 месяцев назад

Thanks for the comment. Both software have their own merits and demerits. You may use both or anyone.

@AhmedBahaa-hy3wz Год назад

Why do we have to change the lumped load into 100% Motor and 0% static, what does that mean in general

@DrJALAGHARI Год назад

Thanks for the comment. I couldn't understand your concern. But I think it makes no difference you may change the load type.

@yr1345 3 года назад

Doctor, help me please.. I have been running the load flow, but the color of the busbar during simulation was red.. what does it mean ? And what should i do if it's mean an error ?

@DrJALAGHARI 2 года назад

Thanks for the comment. Did you get the results or not?