How to Dig, Set and Concrete Fence Posts 

I put a piece of tape at 24" up from the bottom of my post hole digger handles, quick and easy way to let me know when I am at the correct depth.

That you so much for sharing, Start this Job on Sunday & had yet to find a clear easy to follow non patronising guide, :)

This is the clearest video I've seen on properly setting posts. Nice job mate.

Thank you for making it short, sweet, and informative! Getting ready to put up my first ever fence at age 60!

For digging post holes in gravelly soils I've had success with using one of those long iron digging bars to loosen up the soil/rocks.

Once again, a really precise video on how to set your posts in concrete, thoroughly described and shown from start to finish - really useful for me as I am going to be doing this very task pretty soon for our new driveway gates!

Congratulations on your channel and videos. You are really a pro! I've become addicted to your videos, have learned loads!

I appreciate your tips, advice and explaining both the pros & cons of how to achieve a good result.

Good man using a manual post hole digger. I just used one to dig six 2-ft holes into rock hard clay in my backyard. It stood up amazing I expected it to crack in half after the first hole

Absolutely no intention of doing any DIY but this is my favourite channel on RU-vid. Likeable presenter, great editing, great production. I love the way you find solutions to problems. Watched all your videos, just wish there were more.

Not often I fully watch a video like this, but it's really informative and straight to every point. Thank you!

Love it! Really helpful and as always, clearly explained for the novice like me. Great news on the continued sponsorship too

Hello Proper DIY presenter , I discovered your DIY videos by chance and you are a Godsend the way you explain things. I have seen lots of videos from America which are good but the American presenters are so affected . It’s great to see your DIY explanation videos without you saying “ What’s Up Guys “ and other American sayings. I have to see all your videos and forward them to my friends. Cheers Steve

On the subject of concrete vs. Postfix, I've used ballast and postfix pre-mixed 50/50 when putting in 30+ posts in school grounds due to the limited time available during out-of-hours periods. It was more expensive but enabled work to progress quicker. This still allowed haunching of the top of the mix above ground level. As an aside, I took the Damp Proof Membrane 2" above that to ensure protection against decay. Glad to see you used gravel under the too. 👍 As an aside

Awesome level of detail and built to last 😊

Another really well presented video, thanks. Very professional, clear and easy to follow. I'll add my name to the list of interested viewers for the concrete shed base.

Great clear instructions, well presented. Good job from Dingle, Ireland

Thank you. Great videos as always. So informative 👍🏻

Another good video with lots of sage advice. One discussion point is the extent of bitumen paint. Rot tends to start where air/damp earth meet, I think I'd only go down the sides with the paint, otherwise you are making a cup. The "Ham Shanks" have a heat shrink system that seals the sides of the post only and I would try to emulate that with the bitumen. Each to our own.

First time I've seen any videos using bitumen paint - nice one!

This was super helpful, thank you.

I came across a video of yours by accident and I must say that I am a fan. Thanks

Yet another great video. The bitumen paint actually seem an obvious step...... But only now you've said it! More tips to remember and refer to when takin on a task. Cheers Stuart

Thank you - great practical tips!

Brilliant video

Fantastic video again, well done!!!

Brilliant video.... done a few fences and always struggled digging the holes with a cheap fencing spade... usually holes dug too wide and loads of concrete in... worked so far, touch wood.... if I do it again though I think I'll invest in a decent quality trench spade and post hole digger. Good work again, thanks for sharing!

Brilliant yet again👏👏👏

Great video Stuart, love it

Great video and well explained, you certainly know what you are doing, from my own experience I wouldn't paint the very bottom of the fence, so as to let moisture escape through the grain into the gravel at the base, also it would add years to the fence to seal the top of them with a cap to prevent moisture holding in the grain and moss etc growing and rotting the timber through time.. hope you don't mind my input.

Brilliant so glad I came across this channel

Loving this content! I’d love to see a whole fence series from you

I'll be lookinf into some of te tools on show mate. Tha ks for the heads up

Hi. Your vids are excellent. Your work is excellent to. Love it. Very well done. Brilliant stuff. Take care. 👍👌🙏

Great video Stuart, I'll have a look at the ITS website now, 👍

Another good video. Only recently came across this channel. I installed a washing line post a few days ago and used my Titan super jaws XL over the dug hole and clamped the post vertically while I inserted the postcrete. Very quick and effective way of maintaining the post in position

Thanks very helpful nice mix 👍👨🏻‍🏭

Nice post.

Funny looking concrete posts

I used a 150mm diameter hand auger to drill out the hole - really easy (and much better than a powered one that didn't work). I've lent my augur to the local golf course who are using it to fit new tee markers!

My neighbour had some new fencing put in and the guys used expanding foam instead of concrete. The guys were from a legit fencing company, the fence looks perfect and 3 years on those posts are rock solid

Great video, thanks

Good video

Your artistry as applied to this post is brilliant. So happy I watched your presentation before my project got underway. I'm now on my way back to the hardware store for the additional necessary items. I'm confident this upcoming project will turn out most satisfactory. Thank you for your time and effort with this most helpful demonstration. My best wishes to you ! ! !

Great idea with the blackjack (so few people seem to do this ) but shouldn't it come above the concrete slightly 🤔

I really dug this video. 🙃

this one looks quicker and than the way I was taught back in the 80's , I remember putting 100's of post's in while on a council run YTS - back then wooden posts always had to have plenty of 9 inch nails knocked in around the base of the posts and the mix had to go in semi-dry with carefully placed large stones trapping the nails, a wet mix to result in the wrath of the supervisor - and I remember it well! - there was no ballast back then but the mix was stronger than the usual 247 cement sand chippings mix - if I hadn't seen this I would be putting the post the way I was shown nearly 40 year ago - thanks

Great video!!

Thank you

Excellent

Hi...A great video and very informative. I have a couple of questions if that's ok. I am about to fix seven fence panels with 100mm posts, which I want to be about 1.8m tall. I have a Draper 150mm auger, (cuts through like butter) but I don't think the amount of concrete around the post will be adequate. It is suggested that the hole needs to be 600 deep and 3 times the width of the post. So 300mm wide. What are your thoughts on post hole measurements? (The ground is soil then sand after about 400mm. We love your house!👍 Please could you tell me the colour of the render/paint? We are are having new grey windows and synthetic render, which come in loads of colours. Thanks

Realy a good video.

thanks - nice video

Nice one

Hiya What is the best way to get old posts out of the ground please? thanks in advance, love the videos, keep up the good work. cheers Andy

Nice video 📹 👍

Great!

Hi Stuart, am literally going doing fence posts this weekend and the bitumen paint was a step I forgot about. Cheers.

So clear

great channel do tell people to treat treated fence posts when they cut them to get proper life out of them

Really helpful this so thank you.. Can you advise though i’ve to put 3 fence posts in, as you did, in a straight line etc but there’s no wall or anything to go off eg to get number 1 post right, so the rest can follow on! How do i get this right? Lay a string line and fix ( concrete ) that first post first, let the concrete go off and then dig and fit the others? Thanks… NOODLES…

have you look into product called Postsaver. Postsaver Sleeves prevents fence post rotting at ground level is it better to use bitumen base paint instead? or would both work together in tandem.

A couple of years ago I spent 4 hours trying to get an old wooden post out. They obviously had a lot of concrete left over and "got rid of it" around my fence post. Even with a breaker, a sledgehammer, and a pick axe it wouldn't give up! It needed me and my neighbour to lift the huge piece of concrete it was set into🤣

Any thoughts on using a petrol auger?

I'm sure it was mentioned, but for anyone watching this wanting to dig holes themselves as well, the depth will be highly dependent on where you live. Here in east coast Canada, i have to dig at least 4.5 feet (1400mm) or more to get below the frost line. That's double what you had to do. Otherwise you'll have some pretty crooked posts come spring!

What a cliff hanger! It's like a soap did he finish the fence? Did the concrete explode? So many unanswered questions!

Great video, followed it and set a 4x4 post for a garden gate, all good so far and the post hasn't moved an inch. However, after a few months the post has bowed slightly near the top. Other than planing the bow out, how could I straight it?

I’ve got 4 posts to put In for a lean top I’m thinking of mixing my own up rather than postcrete how many bags of cement and ballast do u think cheers 😊

For extra post protection its better to add DPC / plastic 16 micron wrapped neatly around the base of the post before concrete placement.

I also much prefsr doing it this way, i don't like postcrete. Also, i do have to wonder if drilling post holes with one of those augers, whilst quicker and easier overall, really produces a big enouw hole to accommodate sufficient concrete?

What make of drainage shovel and post hole digger are those please?

Did that post move at the end?

Love your channel and your videos! Would you suggest the same ratio for depth for a pergola?

I've been watching your channel for a few years, your work is truly proper. I just viewed "How to dig, set and concrete fence posts" ( 2 years ago). Are your methods of installation still the same? Have you tweaked your process with any new product? It's a wide open question, I suppose a yes or no will suffice. Thanks in advance! Rob, Tampa Bay, Florida

Hi, I'm wanting to use some reclaimed 150mm x 50mm untreated C16 for fenceposts. I do have plenty available but not sure if it's wise to use for this job. If 2 are screwed together and treated would they be up to the task? Thanks in advance.

Much easier with two people. No need to brace the posts, just get one to hold it level and the other chuck in a couple of bags of post mix, then onto the next.

Your fence looks so nice. Thanks for explaining all the details. One thing I didn't get was the rocks at the bottom of the hole for drainage. Given you will pour concrete in the hole, won't it fill the gaps between the rocks and cancel the drainage benefits?

I thought on new builds or runs of plastic pipes you had to run a tracer cable along the run of plastic pipes, so that you could trace them?

Amy plans to do a concrete shed base or similar any time pal? I'd love to see your process for that.

I always prefer the pre mixed stuff but that’s because it’s easier … have you any thoughts on the foam based post mix stuff?

NOOICE!!!

What is on the bottom of the fence posts?

can the bituminous paint be applied to wet posts, ie straight form the timber yard, or do they need to be dry?

What did you treat the posts with to prevent rottng over the years

Any particular sized gravel for the bottom of the hole? Pea gravel or larger 10mm/20mm?

Much better than usual dumb bodge and scarper DIY. Someone finally using high tech tools like laser etc.

You could have used chalk to extend the line marking onto the slab. Probably not necessary here but a useful option when working close to existing slabs etc.

0:57 what is this reference point? How does it refer back to the post

I must say the way you have done your posts compared to mine. I doubt there will will be much difference in amount of years it lasts. Sealing the posts won't make a difference water will still get in its just a fad. I do like your videos. And subscribed. Very nice neat holes tho 👌

That post looked a little more wobbly then I’d like 🧐

I have a question: I dug 32 inch (813 mm) holes and filled them 1/2 way with wet-mix concrete. It has dried, but now I think it best to fill the holes all the way up above the soil line and slope the concrete down away from the post for drainage as shown in this video. What is the group's thoughts on putting wet concrete on dry concrete which would be now above the freezing level. Could or would this harm the posts or cause them the heave up when the ground freezes? Thanks for any help on this.

Can I paint the whole post with that paint

What are your views on postcrete? I've used it for a run of concrete posts as it gives you and "instant" fix.

👍👍👍👍👍 Thanks for posting this video.

What is the concrete mix for the bevel at the top? Looks like it’s sand and cement... 3:1 perhaps? Thanks.

Wheel BaI dug a 3ft 9 inch deep hole with a diameter of 14 inches. Due to rain, the 3ft 9 inch hole got about 9 inches of water in the hole. Crazy thing is the hole was completely covered prior to the rain but somehow 9 inches of water still got into the hole. I have been waiting for the dirt to soak up all the water in the hole however it doesn't seem to be doing that. After two weeks the water is still there. So my question is what would be the best way to drain the water out of the hole? I thought about just putting a few thick bed sheets in the hole to soak up all the water like a sponge but wasn't sure if that would work efficiently. I then thought about just pouring dry concrete in the hole and mixing it with the water that is already in the hole. What do you suggest? One more question. If I drained all the water out of the hole and the dirt/soil in the hole is still wet and soft is it still okay to mix concrete and pour it into the hole with the dirt/soil already being fully saturated with water? Oh wait....one more question LOL. How many bags of concrete would I need for a 3ft 9 inch deep hole with a diameter of 14 inches? I will be installing a fencing pole with a diameter of about 2 inches. Thanks for your help.

I use hex head long screws all at different angles to anchor the post to the concrete, mine don’t move anything like in the video

Everytime I've dug a hole for a fence post there have been rocks, old bricks, concrete and some clay tiles with "DANGER" written on them.

I use used engine oil on all external wood

Was the wobble on the post at the end normal?