How to Disassemble and Reassemble a B&T APC9 Pro 

I will add that to my future videos to record. Thanks for watching and making suggestions. Keep them coming. :)

Congrats on the new APC Pro 45. I'm glad you liked my video. Thanks for watching and I hope you subscribed.

I did notice this and over time it does get a little easier. I did have to replace the spring weight for the safety lever. If you decide to do that upgrade I have a howto install video for the new springs. It feels way better. I hope this helps and let me know if you have any other questions.

@@UBRArsenal What ammo do you use? Did you happen to use 9mm NATO rounds to break it in or did it fire anything you tried first time?

@@numb-lock I didn't run any special ammo to break it in. To date, I've had zero malfunctions. I used a mixture of ammo through the APC9 Pro. I even ran some Hornady critical duty to make sure it could run defensive ammo and it was able to run that flawlessly too.

Hi Paul, I'm glad to hear the video helped out. Thanks so much for watching and leaving a comment. Have a great day!

Hi Dallin, you’re very welcome and I’m glad the video was helpful. Thanks for watching and leaving a comment. Have a great day and please tell a friend about the channel. 😁🤜🏼🤛🏼

I'm happy you liked the video. Thanks for leaving a great comment and I hope you subscribed. :)

I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

Hi Ross, I always keep my videos as short as possible and to the point. I'm glad the video helped. Thanks for watching and leaving a comment. Have a great day.

Glad you like the video. Thanks for watching and hope you subscribed. :)

Hi Mickey, you're correct, adding a brace is very easy. I made two additional modifications to my APC9 Pro. I added a safety delete paddle for the right side of the pistol and I changed the springs for the safety. The reason I made these changes are because the safety paddle on the right side of the pistol would dig into my hand. I changed the springs for the safety because the original springs made changing the safety status way too stiff. If you decide to add these modifications to yours, I have both how-to videos on my channel. Feel free to use them to assist you in the installs. Thanks for watching and leaving a comment. Have a great weekend.

Hey Tone, I haven't removed the charging handles yet because I haven't had a need to remove them. I'll take a look to see what's involved. If it's not too bad. I'll try to make a video and post it. Thanks for the question. Have a great day!

I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛

Thanks for the heads up. I just checked the kdg mount I have for any play and there is zero play. I've put over 700 rounds through it with this mount and haven't had any issues so far. Thanks for watching!

I think you're talking about the barrel length, if not let me know. I went with the 7 inch because I feel like it gives me more room to get a good grip on the rail. It also gives you more options to add any accessories you want, like laser/light combo and angled grip. Hope this helps. Don't forget to subscribe. ;)

Hi Philip, I'm glad you liked the video. Thanks for leaving a nice comment and I hope you. subscribed. :)

If you are talking about the plastic part that the charging handles attach to, with a small flat tipped screw driver, push down on the spring steel clip.

Hi Will, I’m glad you found this video helpful. Also congrats on picking up a APC9 Pro. You’re going to love it. B&T makes amazing firearms. When you get time, you should check out some of my other videos on the APC9 Pro. There are two upgrades I think are must haves. They are also cheap and easy to install. The one is changing out the safety springs and the second is the safety paddle delete. Thanks for watching and leaving a comment. Have a great day!

Awesome, thank you. 👍🏼

I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

Hi Benjamin, I’m glad the video helped out. Also, happy to lull you to sleep. Sweet dreams. 😂🤣😂 Thanks for watching and leaving a comment. Have a great day.

Im glad you liked the video. Thanks for leaving a nice comment and I hope you subscribed. :)

Hi Philip, I'm really glad you liked the video and it helped out. Thanks for watching and leaving a nice comment. Have a great day!

Hi Sean, its the “B5 Gripstop Mod-2”, made by Kinetic Development Group. I added a link to the product page below. I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day. kineticdg.com/product/b5-gripstop-mod-2-pic-rail-blk/

Thanks for leaving a great comment and thanks for watching. Don't forget to subscribe. ;)

Good suggestion on doing including the safety check too. Thanks.

I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

I’m glad the video helped out. Thanks for leaving a nice comment and I hope you subscribed. :)

I was a little disappointed with the MRO. The one I received was defective and I had to send it back. I didn't request a replacement. I had high hopes for the MRO too. I totally understand that you will get some issues like this with any mass-produced product, but I decided to go with an Aimpoint T2. I most likely will do a review video on the Aimpoint T2, once I get time to use it. If the Aimpoint T2 doesn't totally impress me, I'll send it back and try my luck with another MRO. As far as the manual manipulation of the bolt hold open. Yes, it works great. Thanks for watching and please subscribe. ;)

@@UBRArsenal thanks for the reply. I have aimpoints on most of my other rifles so I guess I will bite the bullet again and snag a T2 for my ACP9. I am having issues with the bolt hold open on my GLOCK lower but so far it's just under manual manipulation. Hopefully live fire fixes the issue... and yes I will subscribe!

@@tehhunter2003 Cool, let me know if the issue gets resolved because I was considering upgrading my APC9 to the Glock lower. Thanks for the Sub!

Thanks for watching and leaving a great comment. Don't forget to subscribe.

Hey Ted, you're very welcome. I'm glad you like the video. Thanks for watching and leaving a comment.

Hey rns2222, I'm really glad you liked the video. Thanks for leaving an awesome comment and I hope you subscribed. :)

It's called the Kinetic Development Group Sidelok Mount Lower 1/3 co-witness. I love this mount. All you do is place it on the rail and it locks on the rail. To take it off, all you do is push the button in to detach the mount. When it locks on its solid, no side to side or front to back play at all. I hope this helps and don't forget to subscribe. ;)

UBR Tech Thank you.

Hi Freedom, Im glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

I would think so but I haven't had a reason to attempt it yet.

Thanks for the suggestion. I’ve been thinking about upgrading to the Geissele trigger.

UBR Tech I bought an APC9 Pro -G, partially because of your videos. I love it. Have you thought about a light set up? I did a modlite 300 series with Arisaka mount and a mod button lite pressure pad. Looks like Geissele discontinued the trigger.

Yes, you can swap the charging handles. HB industries sells charging handles if your looking for aftermarket ones.

@@UBRArsenal thank you, any idea on how to remove the stock folding charging handles?

@@UnitedArmory Sorry Cory, after looking more into this. It seems like you can only change the charging handle on the older APC9 not on the APC9 Pro.

Hi C D, I love the look of the FDE one. I tried to get that one first but they were sold out everywhere when I was looking. I'm so glad the video helped out. Thanks for watching and leaving a comment. Have a great day and please tell a friend about the channel. 🤜🏼🤛🏼