How to Drain and Replace Hub Oil on a Polaris Sportsman 4x4 ATV 

Check Out Polaris Demand Drive Plus Fluid on Amazon - amzn.to/2CDBuyu

I'm not sure why anyone would give a thumbs down on this video... he changed the fluid exactly how you're supposed to..good video bro..help me alot

Why not use the drain plug instead? I wouldn't drop the oil pain in my car to change the oil?

Use the fill hole 2 drain then turn 180 degrees to fill

why not just drain it out the fill hole then you won't risk breaking the seal

You do good work from what I see.I have a Polaris that needs front struts new ones are to high.

You do good work from what I see. I have a Polaris I need front struts for. New ones are too high $174 for one.

Easy! Thanks for the vid. But yeah, it really looked like 3 oclock, you said 3 oclock. Think I'm gonna go 3:30 to be safe

Thanks for the vid.I bit the bullet as well and forked over some good coin but at least I know Polaris fluids will keep my Sportsman running smoothly.

Fyi I have the clymer manual for my 97 Polaris sportsman 500 4x4 and my clymer manual does state that you can substitute ATF TYPE F for the demand drive fluid

When you took the center hub off --- I would have waited until the water stopped running out before continuing.

I use type F transmission fluid like recommended

The kids love it.

when i replace the wheel bearings do i pack them in grease or does the hub oil lub them

awesome , exceptionally helpful, Keep it up. oil is in my amazon cart

I have a question my left side on my Polaris sportsman 2004 the 4x4 is not working but my axle is turning and my bearings are brand newthe right side is working perfect they told me I might have a bad hub hope to hear from you soon

will this help make the4x4 magnets engage again? My front hubs arent engaging..

Iv lost awd on 99 sportsman. Have 12 volts going to hubs .could need to clean hubs?

The left side of my Polaris sportsman 2004 4x4 is not working but right side locks the left side axle keeps turning I did replace the axle what could it be

Mike... my 2001 Sportsman 500 HO was placed on jacks for maintenance and while testing the AWD, I noticed the following:. The RF free spins when the other 3 tires stop. Is this normal operation for the front differential and hubs or do I have a problem? The AWD seems to work fine when riding. Thanks for your help, your videos and I have subscribed.

Manual says 4-o'clock. Its right there around 3-o'clock, I think that's good. Hahahahahaha

you can turn the wheel nd drain out the same hole you fill with...

Hi, would you be able to tell me the size of the O ring that goes into a 2003 Polaris Sportsman 500 HO carburettor? I am talking about the O ring that goes on the barrel that holds the float needle. I am having problems getting the right size and the right quality O Ring, the ones that are sold on eBay do not last, I am trying to get the Viton Fluorocarbon O rings. Can you please help? Regards, Franco

Could this be the reason that one of my front tires aren't spinning in AWD or is the armatures? I have heard both, and don't really know which one to try!

Very helpful, Thank you

The 4WD light does come on when I slide the switch but then only one spins. I have had the wheeler on the jack with all the tires off and I tried it in 4 wheel drive, and it didn't work. I took apart the hub and cleaned everything, and then I put everything back and the tire spun, but as soon as I put weight on it it doesn't spin at all!

how often should i replace my oil, hub oil, coolant etc?

My 400L is stuck in 4x4 the light does not light up ever, no mater where the button is its still in 4x4

Good video, thank you.

hello my name is mark I have a 2015 how often do i do this thanks mark

I wheel bearing grease no good

Do you still have the Polaris 400

can you show us how to wash a atv?

Mark, not mike... my apology!

can another brand or type of oil/grease be used