How to DTF more efficiently with the Seismo A13

Подписаться 130 тыс.

Просмотров 7 тыс.

50% 1

In this video I am going to show you how to connect your Seismo A13 Powder applicator to your Prestige A3+R DTF Printer. This process is simple and transforms your DTF Printer into a workhorse. I was able to work more efficient and complete a 20 hat embroidery order while printing these DTF's. Check it out and let me know what you think.
AAPrintsupply aaprintsupplyco.com/?ref=Adub...
Heat Transfer Warehouse Affiliate Link
www.heattransferwarehouse.com...
Ricoma Affiliate Link (To Buy machines)
ricoma.com/US/referral/allan-...
Heat Press Nation Affiliate Link
Heat Press Nation shrsl.com/2qagz
Ricoma Shop Link (To Buy Accessories)
shop.ricoma.com?referral=allan-wade
Pro World www.proworldinc.com/adubbprodu...
Amazon Link Affiliate Link amzn.to/32Mw5D4
Ricoh Ri1000 Affiliate Link ricoma.com/US/referral/dtg/al...
Ricoma White Toner Printer Luminaris 200
ricoma.com/US/referral/dtp/al...
Vexels Referral link www.vexels.com/?ref=allanwade
TKO affiliate link share.tkosales.com/6mr2GC
ECONO TRANSFERS econotransfer.com/shop/ref/AD...
The Vinyl Stand Affiliate Link
thevinylstand.com?sca_ref=374825.SQXqmSxOwT
Cosmos Ink Sublimation inks Affliate Link shrsl.com/2tnx7
Shop A-Dubb Productions Channel Merchandise Store
❤️👉🏾allanawade.com/
For Contributions send to:
Paypal weloveuadubb@yahoo.com
Cash app $adubbproductions
Venmo @kingallanalexanderwade
For collaborations and business inquiries, please email me: adubbproductions@gmail.com
****************************************************************************************
Visit my AMAZON INFLUENCER PAGE where all the gear I talk about and use lives.
👉🏾www.amazon.com/shop/allanwade
Start investing in ACORNS today using the link below. You get $5 and I get $5 for starting to invest using my link.
www.acorns.com/invite/RB7TTW
Home Depot affiliate link 👉🏾homedepot.sjv.io/N3bXV
AMAZON LINKS
Shop on Amazon using my affiliate links Below:
Sawgrass SG500 amzn.to/3wWVFCc
Silhouette Cameo 4 plus amzn.to/32Mw5D4
Silhouette Cameo 4 amzn.to/38pwo6L
Digital Heat Press 15 x 15 amzn.to/2EqjiZK
Brother SE600 Sewing and Embroidery Machine amzn.to/2EYEya0
Brother PE800 amzn.to/2GaieKE
Brother SE1900 amzn.to/3d3UYz2
Spool savers amzn.to/3eO5Wrv
Embroidery scissors amzn.to/3cLqlLZ
Fray Check amzn.to/3bEh9sK
Simthread Brother 40 Color Thread amzn.to/2zuXHk0
Tear away Stabilizer 6x6 amzn.to/3eMfinE
4x4 embroidery Hoop amzn.to/2yGcRCw
PANASONIC GH5 amzn.to/2QzE8u7
Sony ZV-1 Perfect Vlogging Camera amzn.to/3qjwAPb
Rode VideoMic Pro Plus amzn.to/2HaPsvc
Rode VideoMicro amzn.to/2SC358A
RODE VIDEO MIC PRO amzn.to/2hNMyfU
GoPro Hero 9 Black amzn.to/2ZUolNo
SONY-FDR X3000 amzn.to/2hNRZf3
DJI Osmo Action amzn.to/2SQdqUZ
JOBY GORILLA POD amzn.to/2Et83zq
FOTODIOX GREENSCREEN amzn.to/2roav7m
IKAN iLED6 amzn.to/2DiiZyp
Dji Mavic Mini amzn.to/2ttqNh8
Delkin TRIPLE Fat Gecko Three-Arm Suction Mount amzn.to/2GyKbLh
Fat Gecko Camera and Camcorder Mount amzn.to/2GANvWm
****************************************************************************************
DON'T FORGET TO SUBSCRIBE.
🔑Subscribe to my other youtube channel
Allan Wade 👉🏾 / @allanwade
🔑Like my Facebook Business page
👉🏾 pg/adubbprod...
🔑Follow me on instagram
👉🏾 / kingallanalexander
------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------
Also check out my business website
If you want tips and tricks and suggestions on how to make your next production better click the link below.
adubbproductions.com
#embroidery #embroiderymachine

Развлечения

Опубликовано:

4 апр 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 59

@Justretired755 Год назад

You dont need to waste paper every time this is what I do, those 6ft or so of paper waste just reuse it to feed the new prints back into the shaker using kapton tape. You only will waste paper once and the machine will function properly, remember you need to have enough powder at the loop before the vacuum cylinder if not the machine will dump all the powder at once since the sensor is not reading enough powder at the loop. rinse and repeat you only will waste paper once I hope this helps greetings from Puerto Rico!!

@adubbproductions Год назад

💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾 Carlos. You are the man. Connect the same paper each time to feed it threw. Excellent idea. I gotta put that in a video. You got the juice sir. Thank you. 💪🏾👍🏾

@omy1974 8 месяцев назад

Saludos Carlos....tienes ese mismo equipo (Combo) de DTF?

@Justretired755 8 месяцев назад

@@omy1974 si!!!!

@omy1974 8 месяцев назад

Nice, si no es mucha molestia......puedo preguntar donde lo compraste?@@Justretired755

@Justretired755 8 месяцев назад

@@omy1974 Tranquilo lo compre en All American Print Supplies

@MsZrican10 Год назад

A good way to save film is to start your prints first. As soon as enough has printed, then feed it into the next machine and do the rest of the steps as you did.

@adubbproductions Год назад

This is the best way and how I do it now.

@shabayaba123 Год назад

Great demo, "shows the great increase in the quantity of work that results" got this quote from the old £20 note

@evelincameron7719 Год назад

Thank you! Keep these videos coming! Great info.

@djgrandauto8541 Год назад

Homie you on it. Mad props for the content.

@adubbproductions Год назад

Thank you bro. I appreciate it. 🙏🏾

@hfletcher39 Год назад

Thanks for the demo. You could add that scrape DTF film that had all those line on it to end of your sheet that your printing. Taping that to the end will save you some $$$ in the end.

@adubbproductions Год назад

Tried this. When it goes threw the oven the tape melts. Gotta start printing them feed film threw once enough is printed on.

@btdllc Год назад

So dope... love it

@adubbproductions Год назад

I do too.

@KustomBreezee Год назад

yes i remember at the open house we were talking about the time it took and then u saw the dryer part and u were like yeah thats a good jawn lol

@GluePaperScissors Год назад

Right!!!!! I told my hubs we should of just invested on a wider printer.

@DJCoolKevTheTotalPackage Год назад

Cool!!!

@BruceLeef Год назад

Hey allen thanks for sharing.. what is the largest print size for each each .. thanks again 🙏

@lennys5685 Год назад

Hello could you let me know what size table you have your equipment on? I just ordered the same equipment and that table is a good fit for it!

@dcpose Год назад

Thank you for your awesome videos! I have a question: what rip software are you using or would you recommend for my DTF? Thank you!

@habeebayesh3754 Год назад

thank you for the perfect explanation I have a question during your A3+ R unpacking you didnt go through the ink installation I am confused. because I saw many videos about A3+ they need to pool the ink using Syringe to the head of the printer. so did you miss that or this A 3+ r dont need that step ?

@xandersworld889 Год назад

ordering mine! can I please ask what size your table is?

@djgrandauto8541 Год назад

With my Chinese shaker/oven the reps told me eventually you’ll have waste or sacrifice 6 ft. We tape on one end, use staples and heat tape to the other. I get like 15 uses before it’s cooked.

@adubbproductions Год назад

That’s a good idea. Tape them together. All this stuff is from China. They make everything. Very few companies manufacture in the US.

@tmgcustomdesign8689 Год назад

Thanks for the demo! Have you wash tested any of the DTF prints you produced with the Seismo A13?

@adubbproductions Год назад

No problem. No, haven’t washed anything from the dtf printer yet. Just started using it. We will see and I will show when I wash a few items.

@ryanrodriguez8484 9 месяцев назад

Hello, I had a question. I recently got a Seismo shaker, and a little confused as what to do once your last print comes out the printer. Do you cut it there n the roller end can pull it through? If it’s still attached and not printing the film never gets heavy enough to reach the sensor to pull the film through.

@jessicab3928 Год назад

Can you share where you got your table from pleaaw

@Cattas.. Год назад

Does this printer have to be ran every day? Just needing something for when I am not in my office, I don't have to run out or worry with getting someone to run it!

@Golfexpertbelieveme Год назад

do they just make a ton of different designed machines? I have watched a bunch of recent videos and gone online and the A3+R machines all look a little different. What is the newest model/design that we should be looking for?

@vanessag6367 10 месяцев назад

Hi, I have the same printer and my printer white don't show while it prints out. when I print, I can only put it on white shirts. What do I need to do to bring my white back in my prints.

@thec5family607 Год назад

Do you know what parameters setting needs to be set on the DTF station seismo 11? AL 1 Aru P I d Ar r SC LCY

@str8gabe Год назад

I have same set up. Printer is way to slow for that shaker….. already purchased the L2 from AAPS

@adubbproductions Год назад

If I start getting orders on a regular basis I will be upgrading.

@Golfexpertbelieveme Год назад

How much do you think that design cost you to make?

@overflowvinyl Год назад

Do you notice any fumes coming out of the side of the oven when curing? Most other videos with this set up, though the exhaust is pulling up, there's still a bit of smoke on the sides. What's your take?

@adubbproductions Год назад

Yes. I think it is mandatory for your room to be very well ventilated and if it’s not you should use a mask.

@danimartin4948 8 месяцев назад

I have had problem after problem with my A3+ and then A3+-R... How do you let it sit and are you married to it like i have been for over a year now??

@user-on6bp8vs1l Год назад

what are your settings on the shaker/dryer? I feel like the printer is slower than the shaking and curing and am afraid to burn the prints so I am feeling like im babysitting the machine which I shouldn't have to so much.

@Tipple070487 Год назад

agreed, I had to set mine at 70 degrees farenheit because the prints were burning. I would love to know the perfect temp though, because I feel like they were barely curing. I'm in Utah

@allis1designs Год назад

Right $50 that’s skipping the drive thru a few times to invest in business they can even get the generic one at dollar tree to start 💪🏽

@parrot-imagellcadronecompa6148 Год назад

Hi Allen, I got my unit yesterday but am having trouble connecting it to my bookmac, I later downloaded parallel windows, still can register. Any idea what to do next?

@adubbproductions Год назад

I run my software on a Pc the software is Pc only. I know you can run the parallel on a mac but I’ve never done that so I couldn’t give you any advice on it. Sorry. You might have to get a Pc to run it.

@parrot-imagellcadronecompa6148 Год назад

@@adubbproductions Alright , thank you for the quick response. I will have to buy a pc and learn how to use it again. Thanks.

@davidham1338 Год назад

hey man i spent 13k on buying their huge bundle, they AAprint has already replaced the printer cause had nothing but issue after issue with it, have the new replacement printer and its still doing same as last one, it will not print no more than 3 when it starts the 4th it just stays there and prints a damn blob of ink they cant figure it out and im bought to send everything back, do you have any ideas?? I have the newest design of the A3 +R looks nothing like yours

@adubbproductions Год назад

As long as they are working with you to solve the issue eventually it will be resolved. All these dtfs have issues initially from the people I’ve talked to that purchased different brands and this brand. When you get the bugs worked out it’s amazing. I’m gonna advise you to hang in there and let them help resolve the issues. If they can’t then you get the refund but trust. It’s worth it business wise to figure it out.

@denismpho8522 Год назад

Is this Epson converted or dtf dedicated?

@adubbproductions Год назад

It is marketed as a dedicated dtf printer. That is a question you would have to ask the manufacturer. I’m pretty sure the skeleton and some of the parts are the same but I’d like to think some of the inside parts might be different. I don’t know. You would have to ask the company that produced it. I am not privy to that information.