No video :(

How To EASILY Swap Old Briggs Carb & Gas Tank To Newer Style Carb and Tank

Подписаться 291 тыс.

Просмотров 116 тыс.

50% 1

In "She Runs Like A Cheese Champ", Taryl goes over how to properly swap over a newer style gas tank and carb on an old Briggs and Stratton 4HP engine. If you have an old Sensation mower (or other brand) and the gas tank rots through, you can use this method to keep it going as the tank is no longer available. Before and after the fix, local yokel "Scruffy", has Junior pick up his mower. But boy does Scruffy have his own strange way of getting it going. Check it all out here and be sure to subscribe to the channel and ring the bell for notifications. And as always, There's Your Dinner!!
Pick up YOUR Taryl Apparel Here! (Shipping Worldwide Daily)
www.TARYLFIXESA...
Get Your Parts From www.ProPartsDir... and Tell 'em "Taryl Sent Me!"
Grass Rats Garage Theme Music Available!!
Pick up a physical copy on CD from the Taryl online store or download it here:
store.cdbaby.c...

Опубликовано:

24 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 250

@TarylFixesAll 3 года назад

Support the channel! Grab yourself a Taryl T-Shirt, Coffee Mug, Tools & More! Shipping Worldwide Daily from the Taryl Apparel online store! www.TARYLFIXESALL.com

@ristomattikolsi5711 2 года назад

Taryl! Taryl! you gotta paint that tank white, because it wont work if you got black tank in white engine.

@frankschwartz7405 Год назад

Hey Taryl Thanks for the informative and entertaining video. Do you have a "hack" (upgrade) video for the 5HP HS engines with the rusted $125 gas tank?

@FixitFreeman 10 месяцев назад

Oh cool! I have a same Sensation brand with the same old Briggs motor shown here except horizontal and is in/on a debris blower found in the back of an old storage trailer at an 2021 resort auction- it’s at least 40 yrs old and solid metal even the serial number sticker is metal!As opposed to a similar updated model I saw at a local power equipment dealer: Not a solid cast iron motor,looked like it was 80% plastic all for $8-900-$1,000+. This one is still powerful & pushes itself backwards - it just needed some elbow grease, patience intricately cleaning out the gas tank & overhauling the carburetor and a new spark plug. Ty Taryl

@terrystover7365 4 года назад

I ran a small engine repair years ago and still work on lawn mowers from time to time. I'm an old man and recognize a lot of the older engines you work on. I've got an old Moto Mower push mower with the offset front wheel for the discharge my father-in-law owned from the late 50's or 60's (I think). I'm going to restore it this summer. I'm a fellow Hoosier in east central Indiana. I've watched all your videos and would rather watch you and your gang than anything else! Truly enjoy you and you are one very good hand at your trade. Thanks for all you do.

@marvinwilliams9458 19 дней назад

Taryl, I surely enjoy all of your videos. They are very thorough and take the guess work out of a lot of repairs. Thanks

@jaryljackderriere1232 4 года назад

Great idea swapping out the old carbitrator for the new style. Goes to show not much has changed over the years from the original design. A true "classic". Also, it's nice to see some vintage machines still going strong. Keep on keepin' on.

@gordbaker896 4 года назад

At home on the farm in the '50's our first power mower was a 19" Lawnboy with rear discharge. The sparkplug was at the front and I can still see my dad reaching over to the 'kill' lever and pushing the mower backwards and into his toes. Not a pretty sight. No amputations but nasty wounds. Nice to see how that emulsion tube pops out. I thought you were done working on the floor! Great Cast Al. deck.

@nielso.kristensen8056 4 года назад

I love those old B&S engines with this type of carburators. Very reliable and runs for ever. Cheap and easy to maintain. Change the diaphragm, do all over cleaning, clean sparkplug, new gazoline and oil and the engine runs again.

@loktom4068 4 года назад

Absolutely ! My low priced Brigg 3.5 Classic is 38 years old and still running strong each season. Honda eat your heart out.

@dntlss 4 года назад

@@loktom4068 That is awesome,just like cars the newer mowers have all kinds of unnecessary things, pretty soon they will be able to take pictures of your lawn while you mow it and send it to your relatives in Australia via a live feed (maybe they are already doing that,lol), my mower is 20 years old and although not as old as yours its simple as it can be and i love it

@pigheaded5364 4 года назад

I just got a mower with this exact engine and it was updated with the newer plastic carb, I specifically bought it because they run forever, got it for $60 and it'll run longer than any new mower from the big box stores today. I also had the issue with the rubber elbow to fitting onto the breather tube, this video showed me how to fix it for good, thanks a lot.

@chrisroberts6043 4 года назад

Man I can be In a bad mood and all I have to do is put in some theropy time in with my lawn mower repair guy. Good stuff brother.

@ChrisFarrlh41f75 4 года назад

Hi Taryl. Thank you for this video. It was very helpful in getting an old Snapper running again. A patina'd 1981 Snapper 21350P. Waiting for the diaphragm, spring, and air filter to be able to use the original carb and tank. Using one of your other videos, I swapped in a newer electronic coil. I've added your channel to my subscriptions. Between you, Steve's Small Engine Saloon, Bruce Pender, and Doublewide6, I'm learning enough to be a fair hand at small engine repair.

@andyhendrickson5619 4 года назад

I like how it was designed to shoot all the grass clippings back at the operator.

@gerryrobinson5097 4 года назад

This is why I love working on Briggs stuff. Design is so good they haven't had to change it since 1979!

@animalcorvair 4 года назад

an they run an run...

@bentullett6068 4 года назад

Until 2012 when they replaced the good old push rod engines with the new plastic jet carb ohv engines like the 450e.

@lwthowe 4 года назад

I love your videos. You're so good it's incredible. I also think your camera man and your lighting is usually so very, very good and I think that's what really makes your videos easy to follow. I really appreciate that because so many videos on youtube have poor camera work and horrible lighting. So keep up the good work. You make it all seem so easy, when I know it's not. That's the mark of a true professional. Your knowledge is tremendous and your ability to convey that to us commoners is off the charts good. Keep 'em coming. Thanks again.

@wolfmanrebel874 4 года назад

The skit was gold,1000% Truth for anyone in any kind of a shop, many many moons ago back when 1gb hard drive was a big deal I worked with computers and had someone bring in one they said it works fine you just have to slap the right side 3x then punch- kick it, I had multiple vehicles come through with similar story's and no joke a Murray push mower the lady said she would remove her shoes and point it to the east with some hail Marys or it wouldn't stay running,I'm sure alot of folks on here could share some golden story's.

@josephfine3394 3 года назад

That's a rare 4HP Briggs, used on the heavy duty mowers. It has lots of unique parts. I would spray-degrease the cooling fins, and check the magneto gap while I was in there. Nice job on that carbutrator! Junior is up to his old tricks again huh!!

@oldroscoe2590 4 года назад

I love your videos, I always learn something new and even my college educated son can follow them, Fixing old mowers is my favorite hobby.

@BushcraftingBogan 2 года назад

I just trash picked one of those Sensation mowers. Mine is 1985, but outside of that it looks the same. Can't wait to dig into it.

@mcarroll598 4 года назад

Worked for a Briggs dealer when I was in high school 25 years ago. Briggs and Tecumseh sold those Seroneters to check rpms. I ordered one back then. Really cool tool.

@hunter7476 4 года назад

Great video this will help with our old Briggs Hahn mower doesn’t run right I rebuilt the carb and Cleaned it but this is what we are going to do we will replace the whole tank assembly and carb it runs and hunts and needs a lot of adjusting i think the video you did on that old rototiller there were Teflon washers so either I get those or o buy a whole new thing because it’s a great mower but it needs some carb work. thanks taryl can’t say a better word than thanks buddy you are the best, Your freind will I sent you an email a few weeks ago if you remember

@larrycroft470 4 года назад

Mr. Dactyl: I am so glad to see you and your boys back in action together. Y'all are better entertainment than anything on the TV. Plus you teach me something on every video. Thank you so much!!

@mattyg941 4 года назад

Back in action?!? They've been posting videos more than ever dude! Pay attention.

@larrycroft470 4 года назад

@@mattyg941 wasn't talking to you boy

@mattyg941 4 года назад

Sick burn.

@4bangerlove 4 года назад

Scruffy Mcgruffy's beard has seen better days. Love this character

@da_speed_freaks 4 года назад

👌🏽

@philliphall5198 Год назад

I’ve been surprised this year with how many people are bringing in old push mower to get fixed and in good shape They don’t mind spending alot on them eather

@jaredpethan6579 4 года назад

I have two of these sensation mowers. Both from 1969. Still use them every time I mow, best mowers ever made.

@johnrose3169 4 года назад

Sensation mowers - had to look those up. There is a website dedicated to these mowers created by Sensation enthusiasts. Turns out those mowers were made just down the road from me in Omaha, Ne. Sensation was bought by Gilson, who was bought by Lawn Boy, who was bought by Toro. First engine I overhauled was a Briggs of that vintage on a Toro whirlwind push mower.

@jerryberryhill3619 4 года назад

There was a lawnmower shop next door to our house when I was growing up so I was repairing mowers when I was 6 years old, this was the heyday of this mower and I worked on a bunch of them....I remember the pull start mechanism was always a weak point.

@MattsRageFitGarage 4 года назад

I have 3 of those engines and never had any starter issues. One of them has been used weekly since 1977 and even still has the original starter rope in it. Been ripped to the end thousands of times lol. Never had a thing done to it. My favorite recoil system by far.

@onewhitestone 4 года назад

Taryl, I did this stuff for 30 yrs, brings back a lot of memories. Good job.

@MrGjcruz 4 года назад

Thanks Taryl! I've trashed engines because of broken vent tubes thinking they were permanently affixed and couldn't replace. Thanks for the lesson, Taryl!

@shannonbrooks8834 3 года назад

I bought a tank and carb of Amazon It was junk! Bought a genuine Briggs and Stratton carb and tank for around 50 bucks. Worked like a charm.

@kevinleee3408 Год назад

Never seen a throttle control like that kind of cool

@davidetcheverry944 4 года назад

I knew a guy who was mowing with a rotary on a slope and it started to turn over and he grabbed the base to stop it from rolling over and lost a few fingers in the process. definitely not a grass rat.....kisses to muffkin.

@matthewtaylor2185 4 года назад

A friend of mine had a mower exactly like that but it was yellow, like caterpillar yellow. I don't recall if it was the same brand, but he bought it new and took good care of it. Pushed easy.

@ralphwatten2426 4 года назад

Thanks for working on some of the old crap. That's all I have so I've got spare old engines for all of it. Free Snapper push mower, got a Briggs engine from the neighbors running walk behind. Same thing. So thanks again. That's my Sunday morning breakfast.

@josephtaverna1287 4 года назад

Great video taryl very easy process changing over the carburetor it's always a good day when taryl puts up a new video take care my friend can't wait for your next new video

@styga1969 4 года назад

They ( I believe B&S) had a thing that stated when installing the new base gasket on those carbs to scratch up the metal (grove it ) so the gasket wouldn’t squish out between the base and top of carb. They had issues of the gasket slipping out and that was the fix.

@ozzstars_cars 4 года назад

Good video Taryl. The first engine I ever overhauled was a 4.0hp B&S from the late 70's when I was 10 years old back in 1980. Good memories. Now fast forward 40 years I recently had one of the worst customer service experiences ever with Stens. This involved an air filter that would not fit properly on my Cub Cadet 3205. The phone representative was a nightmare to deal with and my email to them fell on deaf ears, no response. I will never use another Sten's product again over that experience. Take care -Glen

@ronsena8595 Год назад

Taryl your repairs are always interesting I get a lot from them keep up the good work.

@brianschmitt5167 7 месяцев назад

Do u have video on how to rebuild orig carb on this machine??? Ty verry much!!! Love the videos !!! Keep up the great work!!!!

@ronster6656 4 года назад

Rally’s vs. Checkers...thanks for putting me over a barrel fellas. Scruffy probably drives a GMC with a rear window decal of the kid urinating on the Chevy bow tie.

@VacMaster2020 4 года назад

Hi Terrel nice lawnmower I have a 1973 lawn boy 8232 and I have switched it the deck with the 8237 the original deck was magnesium and the new deck is aluminum and the deck is from 78 and I love using it it’s my favorite lawnmower ever it’s not that bad to fix

@4gauge10 4 года назад

When those F-525's were new, I thought about buying one.When I found out you couldn't lift the deck and had to crank it up and down.That was a major deal breaker for me. Top notch 🍽 dinner Tayrl and Junior!!.

@alpharaptor7510 2 года назад

I’ve tried this on my 3.5HP side start lawnmower and I think it made the engine more reliable

@madnessgarage5364 4 года назад

I have one of those mowers. I plan on doing an engine swap on it. I've done this carb swap before, didn't know that anyone else did that until now. Great video!

@Pwaak 4 года назад

Very ingenious Sir Dactyl! Good to see Junior back! Scruffys SeaWeed beard was a riot! Cameraman and sound effects seal the deal!

@russb3816 4 года назад

Your high pitch customers voice never gets old to me. Laughing so hard right now. Awesome video as always. There's my dinner.

@styga1969 4 года назад

Lol. .. In my high voice .... “But taryl.... you didn’t check the oil before you started it.. it ran high RPM and you could of blown the engine” lol.

@joef.3094 4 года назад

wowsers ! i have worked on a lot of mowers but i just learned 4 things from this one video. thanks for the dinner, boss !

@towerjokey 4 года назад

HEY is that a beer on the bench???? LOL

@elvis7094 4 года назад

I have an old green sensation mower with the handle bar hinged in the middle. I guess you can push it from either direction?

@BigRichardsGentlemensClub 4 года назад

Congrats on 100k subscribers, Taryl Dactyl!

@justindoel1764 4 года назад

Those mowers are pretty rare and I was super surprised when I saw that video on your brush cutter and I saw that in the skit you had at the starting I was like Teryl has the same the same mower as me. I was super surprised to see that you made a whole video on such a cool mower

@jesseschools8473 4 года назад

Congratulations on 100k subscribers!

@1weirddoe571 4 года назад

"Motor wind up and down" so I had carburetor to tank air leak to gasket, of course. So I put thin line of spray foam around the tank to gasket perimeter--just on the outside--and it worked for 9 years. The plastic carbs always warp a fraction away from the tank and makes a stupid air gap that you cannot even see and messes up the diaphragm pumping. Try and see how long yours lasts and see if you can make it longer than 9 years.

@Coladudetje 4 года назад

I didnt even change oil or spark plug for 25 years. Just filled 1 Liter oil in total. Those older brigg and stratton just last forever. I just have have one big rust hole the size of your hand and several rust holes on the frame but patched it up with some fiberglass and now its good for another 25 years i guess :D Briggs and stratton is just good quality even if it lasts 9 years its damn great with just those minor things to patchup.

@1weirddoe571 4 года назад

@@Coladudetje, wow!

@johnready630 4 года назад

Congtats on hitting 100K ! A bit of needed humor in dark times , thanks guys.

@vancemacd6315 4 года назад

You should make a 10 min movie, your characters and acting isn't bad at all. Very interesting content, love this channel.

@TedBishop1 4 года назад

Good to see you Junior ........nice job on the mower Taryl thanks for the video !

@crisprtalk6963 3 года назад

Look at all that metal on that 1979 mower! Nice!

@charger19691 4 года назад

I need one of those governor springs for my old 3 horse Briggs. Great video!

@angieshaw8877 9 месяцев назад

...but admire you as the "guru of cando" better n' anyone else on the "interscream"!🎉😅

@ElainesDomain 4 года назад

Looks like a mower worth having

@dixiepan8538 3 года назад

Very good video, good information. 14:32 that is what she said. Be safe, Be good, Be kind.

@spinb 4 года назад

100K Subs Congratulations, and it's about time!

@chriswagner6310 Год назад

Good morning guys

@lewiemcneely9143 4 года назад

Get a tube of Seal-all and squeeze a blob out in a dry perforated tank. It'll seal up the small holes in the steel tank where the dimple is where the pickup tube goes. Just squirt in a blob and it'll level itself out. Give it a while to cure and fill it up and go to work. I've done a 5 and a 4 horse like this. So far, so good on several seasons of leak stopping.

@n3bruce 4 года назад

Before string trimmers were common, this type of mower was popular among landscapers. My dad was friends with a guy that had a landscaping company, and lamented the fact that they were not making them anymore. They used them for trimming or small lawns.

@silverbullet7434 3 года назад

Do you have the vise grip z benders . One of the best tools I ever bought in the years of repairing mowers..

@markamcampbell6340 4 года назад

thanks, now when i work on my mower i hear your music in the background.

@zinnstigertownmowers780 3 года назад

Maybe I should try buying one of those off market tank/carb set ups

@MrGoosePit 4 года назад

100,000 Subscribers! Congrats, and best wishes for many more to come!

@dntlss 4 года назад

Man what a great video, if you can't do this after watching this its time to take it to someone.

@zoemeow7677 3 года назад

Am making go kart engine so want to make bulb carburetor fit because want motor bike tank, Taryl is Best! Thanks 💖✨

@kj4unxpondosinatra937 4 года назад

I recently acquired a 1980 3.5hp on a snapper push mower. The engine looks very similar to that one. I would love to see a video of the teardown, fix and reassemble of that motor. And any parts /gaskets and anything else needed to rebuild. Should I stay with points or upgrade? Why isn't that design used anymore? I like the straight-up pull on the rope to start. Thanks for all your videos that have helped me tremendously.

@ChrisFarrlh41f75 4 года назад

All I had to do to get the one I have running after using this video was to sand the coil and the flywheel magnets, cut the wire going under the flywheel as close to it as possible and on the other end at the plug to the coil, swap in a newer coil, put in a new spark plug (Champion J19LM), put in fresh gas, set the throttle to Start, prime 5 times, and pull. It started on the 2nd pull and ran fine. Used it to cut the grass across the street yesterday. To find parts for your engine, you will need the numbers on the blower housing. The Machine Type Model (MTM). And add a 0 in front of the number. For instance, mine is 93508 0189 01. For parts lookup on the Briggs site, I had to enter 093508-0189-99. Points or electronic depend on personal preference. Electronic = less maintenance and much easier to replace. Points = replace from time to time and set gap with a matchbook cover. Points are in a box under the flywheel, meaning you'd have to remove the blower housing, screen, starter clutch, and flywheel to get to them.

@kj4unxpondosinatra937 4 года назад

Chris Farr thanks

@calebperry4054 4 года назад

congrats Taryl and crew on 100k subscribers!!!!

@johnchadwicktilton 3 года назад

On the Z- Bender tool it would be cool if you sold the wire & cable to .

@nizwer 3 года назад

Great video. Learned a new word carbitrator!

@SurvivalInFlames 4 года назад

The catfather shirt!! Lol

@jameswarren436 29 дней назад

my old one dont seem to have a place for the left bolt on the tank. dont know if the right one lines up ? but its there am i missing something?

@ronalddavis 4 года назад

man that's a nice looking heavy duty deck on that mower

@scavengersgreen 4 года назад

How about a video on the other Briggs pusher carb style? Some have the primer, some don't. Has the rectangular filter, might be that Quantsum model.

@bentullett6068 4 года назад

That wouldn't be a bad shout as the Quantum engine you are on about went through three phases of carburettor. One had primer and manual choke, one had just manual choke no primer and the final versions of the Quantum engine had automatic choke. The manual choke carburettors have started to become obsolete so retro fitting the auto choke system and carburettor might be a good idea.

@Lou-hv6js 4 года назад

You guys are great, Taryl! Thanks for the schooling!

@gavmansworkshop5624 3 года назад

I usually put those older carbies/tanks on the newer engines because they're a lot better.

@jameshixson4770 5 дней назад

I tried to ask for a catalog from Sten's online and they said I have to be a dealer to get one.

@nicktelesco4950 Год назад

Can you make a video where I could just put a side mount carb and run a separate fuel tank so I can put it on a mini bike

@ristomattikolsi5711 3 года назад

I've got -69 3hp Briggs lawn mower engine with the manual choke carb, and that tank dosn't fit with the auto choke Briggs engines from the 70's. Those 60's Briggs tanks got a different set up for instalment.

@beingsneaky 3 года назад

i need the vertical pull starter.

@gardener123ful Год назад

Taryl will the special B+S tools also fit on a B+S Magnum Engine???? Thanks

@officerdanko6922 4 года назад

Well that was SENSATIONAL 👍😜

@anthonyrodriguez2613 4 года назад

Great dinner

@dave1135 4 года назад

Ah, good old Briggs auto choke, took a 391681 diaphragm. I stocked those by the dozen back in the 80's

@frederickjuneau7874 4 года назад

Happy 100K subscriber Taryl

@clsmallenginerepair3814 4 года назад

Good job taryl,, true tech, gotta check the rpm with both meters, awesome

@rhomeusa5160 4 года назад

Good old-fashioned American Way we fix it thank you teacher

@donf3739 3 года назад

Gotta love that cast aluminum deck! Not a spec of rust.

@marioncobaretti2280 Год назад

I have a 77 not a craftsman but a sears mower with same engine

@THEMOWERMEDIC1 4 года назад

I’m doing the same exact swap on a sensation mower too!! How ironic

@calvinmientke3539 4 года назад

Sometimes it's good to have the RU-vid spies keeping track of your thoughts so you can watch a "how-to" instead of a "What the heck did I do wrong" video.

@rdaw33 4 года назад

Had one of those old auto chokes on an old mower, always started cold, never hot.....If I shut it off, it was time to take a break anyway to let it cool down....thankfully long gone!!!!

@anthonybendl8125 4 года назад

Always good reminders from the Master!

@marioncobaretti2280 Год назад

I like those auto choke carbs from the 60,s

@billshedd55 4 года назад

When I was in the Air Force there was a safety bulletin about an officer who tried to trim bushes with a push mower. When he tried to pick it up his fingers were cut off.

@donf3739 3 года назад

Are those plastic carbs as good as the older metal ones?

@JammyCrackcorn 4 года назад

I have a Troy Bilt 160 Cc Self-propelled Walk Behind Lawn Mower... I have stripped the carburetor down twice and cleaned jets and float bowl and gas tank and it will run great for about 30 minutes and starts surging .....Is the automatic choke causing a problem which I believe is the push in part that sits on the engine block before the carburetor , right.... It runs great but does at his within 30 minutes

@michaeltanis7301 4 года назад

Debris shoots back sat your feet, great design..... Taryl, Be careful!!

@calvinmientke3539 4 года назад

Notice the aluminum patch to fix the hole from that one and only rock in the yard. I have a "Yard Bug" that blows UP into a basket or buries the motor in clippings if the basket isn't in place. Edujimakated Idiots!