Does this only work with diesels cars or petrol cars also? Also were you able to compare to original file with immo on to the one with immo off to see where the immo off was written?
Hey Yes you can immo off gas ecus as well procedure depends on which ecu And yea u can definitely look at the file with a hex editor and see where the changes were made
@@ERAutomotive thanks. I don’t have that bench equipment. Wouldn’t get it in time if I ordered it. What if I found another cluster with immo and cloned the old one would that work
@@ERAutomotive Thanx, I couldn't get any version of VagTester to communicate with the ecu using both drivers (believe it doesn't open the port for some reason) ... I'll try using the Hex interface to see if it corrects the problem, tho the blue one does work with vag-com lite which technically should work with VagTester
@@ERAutomotive Thanks for reply and good tutorial btw... And yes, tried different versions I think v3.5 was coming up with port error (which i set to 4 where my com-port is set to) and the v2.5 said no response from ecu... Used K-Line as the protocol... I made a dual boot setup on the laptop so ill try first on Win XP instead of win7 maybe its something in the windows
My car audi a3 2002. year was stolen. I found and returned the car, but now the immobilizer light flashes constantly. The car can start with any key. The immo light flashes all the time while the engine is running. How do I fix this?
I allready have bin file. I try to do immo off with edc 15. when I open the bin file with ec15 FIN and Immo parts emty, KM and Login 0(zero), Immo status ON. than I push Off and calccheck and save . The saved file is 0KB. What is the problem?
@@ERAutomotive ı have 2 bin files. One is original , other is tuned stage 1 file. Both files read by tuning company. I tryed both files but result are same. 0KB
@@ERAutomotive I didn't know they were two separate files. sorry. When I saw the bin extension, I thought it was a single file. I will try to read the immo file myself. thank you
Hy thanks for your time. Is it ok to ask why they want you to do the immo of i understood immo stands for immobilizer but i don't fully understand what do you mean by immo of if you don't mind plz.
Makes it easier to swap in a different ecu into the car Or for swaps since typically the swap car wouldn’t have the rest of the parts required for fully functioning immobilizer
@@ERAutomotive oh i see it now thank you How about the data on the old ECU? And I guess the car would start with out the transponder on the fob afterward right?
Hello how is the name from the obd2 tool? Do you have a link please to buy them? and the other question , how can i get this siftware to read the eeprom
Thank you do you have a link for the cable please amazon or ebay and the edc15 edc16 cal i have but i need this software to read the eeprom i have a original ross tech vcds can i read with them and this Software
I turned immo off on my 2002 golf tdi, with this process. Engine starts and runs fine, but I now get a check engine light for engine block by immobilizer. Does anyone know what i have to do to fix my new problem? Has anyone experienced a check engine light for immo after immo off programming? Or do i just have to deal with the check engine light on all the time. If i erase the code it sets right back on the next start.
I think my problem was the TCM loosing signal from the ECU when programming and the TCM was setting DTC's. Cleared all DTC's and test drove. So far so good. Thanks for the info.
The immo will still be active in the instrument cluster and when it dosen't detect the right signal from the key the immo light will flash, but the ECU ignores the signal from the cluster and the engine stays running. Sorry no fix for the light. Other than covering it or removing the bulb.
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-j099R-6tj2c.html This is one method There’s are others that can be found on nefmoto forum that use the cheap blue kkl cable
Cant get the kkl cable work with it unfortunately as im on windows 10 ive lituraly bought mpps to read ecu and still cant unlock it lol pain in the ass
@@ERAutomotive i tried dual booting with windows 7 it wnt install its being a pain any chance i can send u my ecu file and you unlock it for me im getting desperate