How to EDIT to the BEAT in DaVinci Resolve 18 | Using Transients in a Way You NEVER Thought Of!

Подписаться 107 тыс.

Просмотров 45 тыс.

50% 1

🎶Artlist Music: geni.us/Artlist_Music 🎶 🔥 Get 2 Months Free!!!🔥
I'll show you how to use Transients to quickly edit to the beat in DaVinci Resolve 18! I'll also show you how to modify your clip so you get transients on only the part you want - like the kick drum or bass! This technique will help make sure you are getting your cuts right on the beat. Let's jump in!
☕️☕️☕️ Buy Me A Coffee: www.buymeacoffee.com/JY
🎈TRY TUBEBUDDY: www.tubebuddy.com/FocusPhotog...
My Store - Presets and More! jason-yadlovski.myshopify.com
FREE EQ Tips/JOIN EMAIL LIST: www.buymeacoffee.com/JY/e/9853
🚨💰💰💰 SAVE $50 on Annual Motion Array Subscription using my link below! 💰💰💰🚨
🎥 geni.us/MotionArray_JY 🎥
🎞ArtGrid Stock Footage:: geni.us/Artgrid_Stock-Video 🎞 🔥 Get 2 Months Free!!!🔥
AUDIIO: geni.us/AUDIIO_Music-SFX
🔥🔥 GET 20% OFF of AUDIIO PRO PLAN with Code: EARLYADOPTER
🔥 GET 10% OFF LIFETIME PLANS with Code: Jason10
🌤 Backblaze: www.backblaze.com/cloud-backu...
(never loose work!)
MERCH: jays-shop-32.creator-spring.com
Full Disclosure: As an Amazon Associate I earn a small commission from qualifying purchases. There is NO EXTRA COST to you.
DaVinci Resolve Studio: geni.us/DaVinciResolveStudio
Davinci Resolve (FREE!): www.blackmagicdesign.com/prod...
MY GEAR!
🎥 My Camera Gear 🎥 kit.co/JasonYadlovski/photogr...
🎙 🎧 Audio Recording 🎧🎙 kit.co/JasonYadlovski/audio-e...
💡Lighting/Office/Studio💡 kit.co/JasonYadlovski/lightin...
💻 Computer/Office/Studio 💻 kit.co/JasonYadlovski/compute...
FREE EQ Tips/JOIN EMAIL LIST: www.buymeacoffee.com/JY/e/9853
0:00 How to Edit to the Music Beat in Resolve 18
1:44 Edit to the Beat Technique Overview (quickly)
2:21 Isolate the Beat
3:49 Edit to the Beat - Technique in Detail
5:54 Finding the Beat Using Transients
6:23 Turn on Transient Detection
7:43 Make Transients More Precise
7:51 Isolate the Beat Using EQ
9:26 Create Compound Clip
10:24 Transient Detection on Compound Clip
11:10 Place Markers on Transients
13:03 Bring in Video Clips
13:26 How to Cut & Ripple Delete Video Track Only
14:30 Cut/Ripple Delete Shortcut
15:50 Turn On Original Audio Track
16:40 Adjust Clips FAST - Pro Tip!
17:32 Another Pro Tip!

Опубликовано:

25 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 189

@JasonYadlovski Год назад

Thanks to Meir Mashiac from Messiah Resolve for suggesting a video on this tip. Check him out here: www.messiah-resolve.com

@ditomignolo Год назад

You literally saved me hours. I used to sync with the beat manually, listening to the music over and over. THANK YOU!! You made it so simple i almost cried!

@JasonYadlovski Год назад

You're welcome!

@Darko22602 Год назад

Awesome guide, you made it all really simple. Thanks!!

@JasonYadlovski Год назад

You're welcome!

@andrewmason8691 Год назад

Jason, that is crazy cool. Your most valuable video to date amongst many valuable videos. I’m calling it. GAME CHANGERRRR! 😃👍

@JasonYadlovski Год назад

Haha, thanks man! Glad people are finding it helpful! 😜😁👍

@jer3006 Год назад

So impressive! I think I could actually do this now after watching this video! Thank you! I can't wait to try this out. ⭐x 5

@JasonYadlovski Год назад

You got this! 😁👍

@thestickerboys Год назад

seeing a real difference in your quality of content lately. Keep it up! love all the tips!

@JasonYadlovski Год назад

Thanks! Always trying to make better content! 😜

@Albradler Год назад

Awesome! This helps me a lot! Thank you so much!

@JasonYadlovski Год назад

You're welcome! Thanks for checking out the vid!

@hellowallace Год назад

Thank you, I tried it in my latest one, it does work. Usually I do it manually, but this seems to be a faster way. Thank you again!

@JasonYadlovski Год назад

You’re welcome, glad it worked! 😁👍

@osayandeaikhionbare1636 Год назад

Thank you, your videos have been very helpful, as someone new to editing and making videos, your content has definitely shown me a bunch.

@JasonYadlovski Год назад

Awesome, glad my videos are helpful!

@PawFromTheBroons Год назад

OMG Yessss!! Thank you.

@JasonYadlovski Год назад

You're welcome! Thanks for checking out the video!

@joenicklo Год назад

Holy crap...this is going to save me so much time! Thanks Jason.

@JasonYadlovski Год назад

Awesome, you're welcome! Thank you for supporting my channel, I appreciate it!

@joenicklo Год назад

@@JasonYadlovski You're welcome.

@SWINDISA Год назад

GREAT TUTORIAL. THANKS SO MUCH :)

@JasonYadlovski Год назад

You’re welcome, thanks for watching!

@justketh4298 11 месяцев назад

i love you for this Jason Yadlovski from youtube.

@JasonYadlovski 11 месяцев назад

😜👍

@KamranJawaid Год назад

Love your videos dude.

@JasonYadlovski Год назад

Thanks! I appreciate you watching! 😁👍

@GaryCunninghamyouareenough Год назад

I loved this Jay - isolating the beat is genius 🤯. Great video - cheers as always man 🙏🏻

@JasonYadlovski Год назад

Thanks Gary! Isolated in the beat definitely helps! 😁👍

@GaryCunninghamyouareenough Год назад

@@JasonYadlovski I can't wait to give it a go - cheers man 🙏🏻

@lvminh Год назад

This clip is life-saver to me. That's why I always consider your channel is one of the best Davinci Resolve tutorial channels in youtube. Thank you very much! 💯

@JasonYadlovski Год назад

Thanks for your kind words! I appreciate it!

@adammiles7163 Год назад

so helpful thanks brodie

@JasonYadlovski Год назад

You're welcome!

@lauramartin4899 Год назад

Finally!!! I texted you months ago about it!! Thanks!!

@JasonYadlovski Год назад

😁👍

@Ride2Xplore Год назад

I edit to the beat for some time now,but your tips will make it easier and faster for sure!Many thanks for this tutorial!Subscribed!

@JasonYadlovski Год назад

Thanks for the sub, I appreciate it!

@endorphinex Год назад

Hey Jason, glad to see you again. I wish you made this video 2 weeks ago, when I spent two days editing a 1.50 minute video to the best. Nonetheless, now I know how to do it in the future. Thanks Jason & have a good day

@JasonYadlovski Год назад

Thanks man, have a great day also! Thank you for checking out the video and dropping a comment. 😁👍

@upmedia360 Год назад

Gracias por ese video! 👍🏽

@JasonYadlovski Год назад

You’re welcome! 😁👍

@emanueldavid7977 Год назад

wow.... just wow.. no other words ...

@JasonYadlovski Год назад

😜😁👍 thanks for watching!

@WitcherKING Год назад

exactly what i needed to learn....Thanks a lot.

@JasonYadlovski Год назад

You are welcome!

@FusionThunder Год назад

Thank you! Really useful for tiktok and gaming montages

@JasonYadlovski Год назад

You’re welcome!

@grab_media 10 месяцев назад

VeryNice. :) Thanks

@JasonYadlovski 10 месяцев назад

Welcome!

@DavidWagelmans Год назад

Wow thank you for that super useful information, you got a new subscriber :)

@JasonYadlovski Год назад

Thanks for the sub, welcome to the community!

@cieldeneptune Год назад

THANK U

@JasonYadlovski Год назад

You’re welcome!

@popcornshiner3937 Год назад

Thanks vey much for this, it is perect for what I want to do.

@JasonYadlovski Год назад

You’re welcome! 😁👍

@jacekseredynski8777 Год назад

Dziękujemy.

@JasonYadlovski Год назад

Thank you for your support! I appreciate it!

@andyncaba Год назад

Wow, great work brother. This is going to save lots of time when editing. I have noticed that you are the 'Master' when it comes to "Fairlight." Keep up the good work sir.

@JasonYadlovski Год назад

Thanks man! I don't know about the master, just a guy who knows a little more than most and loves audio. 😜

@d42 Год назад

@@JasonYadlovski something a master would say 🤔

@djmeir1975 Год назад

A Great Tip! 😉

@djmeir1975 Год назад

You forgot to say something ...

@JasonYadlovski Год назад

Your right! My apologies, I’ll pin a comment mentioning you. 😜

@STUDIO-ew8dz Год назад

thanks

@JasonYadlovski Год назад

You’re welcome!

@FLAMDANGOoriginal Год назад

legend dude

@JasonYadlovski Год назад

I don’t know about that. . .😁

@FLAMDANGOoriginal Год назад

@@JasonYadlovski Certified legend heheh. Hey is there a way to automatically put markers on all the transients instead of manually?

@JasonYadlovski Год назад

No automatic way to do it that I know of. 😜

@FLAMDANGOoriginal Год назад

@@JasonYadlovski roger that. ctrl + m for life

@samoht003 Год назад

👍🙏🙏🙏Thank you very much

@JasonYadlovski Год назад

You’re welcome!

@jordiroyoillaurado1347 Год назад

ohhhh, gracies, molt bon consell

@JasonYadlovski Год назад

😁👍

@dez5 Год назад

0:56 Premiere Pro - Automate to Sequence is Priceless. Bouncing your M - keys and adding Markers would better. Adding Clips to the Markers would be Sweet like Premiere and Avid

@JasonYadlovski Год назад

Hopefully they add automate to sequence to resolve soon! 😁👍

@JimRobinson-colors Год назад

Good topic, After 20 years as a pro musician, and a background in recording studio engineering. I tend to just tap my foot and count the measures and click the M either on the 1 or the 1 and 2 - or on each quarter note. I find the eq trick a little strange and to my estimation may be confusing for some people. If there are transients, couldn't a noise gate be set to only let the transients through? Sometimes the kick drum's snap, is what is prominent. The advice that I have given people in the past is that if you have no actual music training, invite over a friend that is a drummer or a keyboard player and ask them to tap the M on the beat and see how it's done. I also don't always mark the whole song - If you visually look at the markers, you should see a pattern - considering that it is tempo driven, the markers can be copied and pasted over and over to fill the song and if the tempo is consistent, the ones at the end will still be in sync. I have seen this question many times in "Davinci Resolve User Group" on facebook, so covering this is going to do well for you. I don't know how the Premiere one handles it. It seems that if they had a click track tempo that you could set by tapping 2 or 3 bars and then have it lock to the track. Considering all the amazing stuff that Resolve has added over the last few years, that this would be a simple add-on. I have a an 11 point list that I have been asking BMD to add to Resolve. I think this would be a good thing to add.

@JasonYadlovski Год назад

Hey Jim - Thanks so much for sharing your thoughts, I appreciate it! It's great to hear from a music/recording pro. I hear ya on the listening to the beats and tapping it out. I do that too. I know some people aren't able to do that so hopefully this can help them. I agree, Resolve has come so far in just the last few years, it's pretty amazing. It would be great if they could add in what you mentioned. Hopefully they continue to innovate and add awesome features that make our job of editing easier and faster. Thank you for watching!

@l0rdcroissant Год назад

wow soooo much to learn... so this will be watched several times since I am now looking at improving the sound in my future videos. YUP, I'm going there lol want to say thank you, as of today my channel has become monetized and really if it wasn't for your videos I wouldn't be making and improving my videos :) I do include a link to your channel as a way to show my appreciation now to find one on producing my own templates to streamline the production hahaha

@JasonYadlovski Год назад

That's awesome, congrats on getting monetized! That's great! Thanks for dropping a link for me in the descriptions. I appreciate that!

@l0rdcroissant Год назад

@@JasonYadlovski you've earned and thank you

@jacekseredynski8777 Год назад

hi Jason, thank you for all your videos, a lot was learned from your channel. Is that option available on DaVinci 17?

@JasonYadlovski Год назад

You're welcome and thank you for watching! Yes, I believe the transients are available in 17.

@jacekseredynski8777 Год назад

@@JasonYadlovski This is fantastic. I used this option first time today, and I saved a lot of time. Probably you have a lot of requests, but I'll try. I made a lot of videos from lives gigs in pubs. I used for that 3 cameras, 2x zoom Q2n 4k, which is perfect for audio, and GoPro10 on the gimbal. Sometimes I have access to 16lines audio from the mixer. Do you have maybe some advice, on how to quickly edit audio like this, and how the best to edit video like that? Regards Jack

@NicklasToft Год назад

super video ! thanks. Do you have any tricks to remix tracks, make them longer or shorter just in like PP remix tool ?

@JasonYadlovski Год назад

Unfortunately there’s no remix tool in resolve, it’s a little bit of manual but I do have videos on how to make songs longer or shorter. The basic idea is to make a cut, match the music up as best you can, add a Crossfade and you should be good to go.

@NicklasToft Год назад

@@JasonYadlovski yeah same i do now, Thanks for the fast respons !

@mageprometheus Год назад

Saw you with Casey and subbed. As a Reaper DAW nerd, I just had to.

@JasonYadlovski Год назад

Awesome! Thanks for the sub! I've used Reaper to make multitrack recordings while I'm mixing. Great program!

@mageprometheus Год назад

@@JasonYadlovski You're welcome. I've just started working on some Lua scripts to integrate my x-touch with Resolve and Dorico. Fuscript is so useful.

@PtrJns 11 месяцев назад

Still cant seem to get the transients to show when using a faster (only 70 BPM) track (Hexes - Bassnectar). There is a lot going on in the track and the EQ doesnt seem to do much either. Any other tips, besides manually maching the Markers like I have been :)

@bassAsax Год назад

Jason, love your videos! question - I want to edit both audio and video (playing 6 different basses to same song, want to cut to each one on the beat) but want audio and video to switch as I use source overwrite. is this possible? seems it uses both audios vs. switching audio

@JasonYadlovski Год назад

Thanks man! Sounds like a cool project. Would using a multicam clip work for you in this situation? You can have the multicam clip change angles & audio if you want. Seems like the quickest and most efficient way to do it. Here's an old multicam video I've got on how to do it, but everything is the same in version 18: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZzPZe36RdkU.html

@Photovintageguy Год назад

30fps is better for cutting to the beat vs 25fps. You can also edit a frame a little off the beat if you want softer cut. Cut on movement also is good with beat. Camera movement, subject movement ie arm movement or head turn.

@JasonYadlovski Год назад

😁👍

@Photovintageguy Год назад

@@domehouse79 more frames equals more resolution. If you can stop on five more frames per second, the match will be closer to what happening on the screen. It's not a lot but it is noticable. The same would go for 60fps, but then you typically change the look and cameras drop in image quality, so 30fps is a very reasonable compromise.

@oliverhonigberger8442 Год назад

Hi, thanks for the video! Is it actually possible to extract keyframes from audio transients like in After Effects?

@JasonYadlovski Год назад

I don’t know how after effects does it, I’ve never used after effects but I don’t believe resolve will automatically key frame the transients if that’s what after effects does.

@raguellagrande7344 Год назад

THANKS FOR THIS! Question - is there a way to include the transients as part of an expression in fusion or other effects? I'd imagine this is how sound equalizer graphics are made but i can' seem to figure it out or find tutorials about it. any help would be amazing, and it could also be a great video for your series!

@JasonYadlovski Год назад

You’re welcome! I’ll do a little research into expressions, I don’t know anything about them. It might be possible I just don’t know.

@raguellagrande7344 Год назад

@@JasonYadlovski that would be amazing. In fusion, you can use expressions like math to make one node's values change when another node's values change, using linear math. So, for example, you could say the wiggling effect of the displace node increases as the size value of a merge node increases. Would be great to make a sort of "camera shake" effect respond to heavy bass automatically. (I'd likely place that on an adjustment layer just so i don't interfere with original footage and can exclude footage from the effect as needed. Thanks again!

@rossscobievideographer53 Год назад

This was great, what are the little symbols above the band 1 and 2 etc in the EQ

@JasonYadlovski Год назад

I'm not sure what you are referring to, can you tell me what time in the video you saw that? Thanks! 😁👍

@rossscobievideographer53 Год назад

8minutes 18seconds, the EQ, band 1 has alittle symbol below it band 2 etc

@JasonYadlovski Год назад

Got it, thanks - those symbols determine the type of curve for that EQ Point. Starting from the top of the list for bands 1 & 4, you've got a low pass filter, a low shelf, a bell curve, notch, high shelf and a high pass filter. For bands 2 & 3, you've got a low shelf, a bell curve, notch, high shelf. Hope this helps!

@rossscobievideographer53 Год назад

@@JasonYadlovski fantastic 👏 il need to study up more on audio, and sound design and EQ thanks Jason

@MarioHilgenfeld-wh7hx Месяц назад

I was hoping for instructions on how to sync movements to the beat.

@JasonYadlovski Месяц назад

You can use markers or the transients. Resolve can't line up the clips for you automatically but you can snap clips to the transients or markers.

@osayandeaikhionbare1636 Год назад

Do you have a pdf or a video with your shortcuts that you don’t mind sharing? I think that would be huge, something I can print out memorize and work with.

@JasonYadlovski Год назад

I have a few PDFs with some info. Check out my shopify page. There's a link in the Description.

@shoguncustoms Год назад

Man your videos are great. Great teacher. Quick question. I'm trying to add a picture at the end of my video. But right before it gets to the last video clip before the photo, it starts lagging and then the photo comes in like a full second late. And it's snapped right against the last video clip too. How do I fix that? Thanks in advance

@JasonYadlovski Год назад

Thanks so much, I appreciate you! sounds like it’s just a playback issue, have you tried rendering it out to see if it comes out OK?

@shoguncustoms Год назад

@@JasonYadlovski I have not 🤣 Guess I'll try that when I get home. I'll report back

@shoguncustoms Год назад

@@JasonYadlovski That did it. I rendered it and it plays back just fine. I'm new to all this so thank you for the help, man.

@shoguncustoms Год назад

@@JasonYadlovski P.S. Glad I subbed to someone who's actually willing to talk to people in the comments section. Definitely gonna go through all your videos and keep learning

@JasonYadlovski Год назад

Thanks man! I do my best to help everyone and answer all comments. I appreciate everyone out there watching!

@VTGanja420 Год назад

6:34 transient detection spot i was lookin for, hopefully it helps y'all aswell :D

@JasonYadlovski Год назад

You should check out the video I’m putting out tomorrow - I show how to edit to the beat with the new grid feature in Fairlight. Easier and quicker I think. Thanks for watching!

@VTGanja420 Год назад

@@JasonYadlovski looking forward to it, im having all sorts of new to the program issues still lol. hoping i can pick up where im missing out on what im trying to do :D

@JasonYadlovski Год назад

If you have any questions, drop a comment on one of my videos and I’ll help if I can.

@VTGanja420 Год назад

@@JasonYadlovski i appreciate it, and ill likely ask a few along my journey :D

@xnaduah 9 месяцев назад

Hey! I'm trying to use this method, but my down and up keys don't do anything, so the 'jumping' doesn't work. Do you have an idea how I could fix that? Thank you!

@JasonYadlovski 9 месяцев назад

Hi! Maybe try using a modifier key with the arrows - like Alt, Shift, Ctrl?

@d42 Год назад

When I put down markers on the transients it puts them a bit to the left of the audio track and not exactly on the transient. any fixes?

@JasonYadlovski Год назад

Maybe its a frame rate issue? I' not sure, but it will probably be close enough. I doubt that anyone will notice if a cut is 1 frame off.

@yarrokon Год назад

SO MANY PEOPLE DON'T DO THIS and it pays off in ways your viewers can't even tell WHY they liked what you did.

@JasonYadlovski Год назад

It's the little things that make a big difference. 😜

@charlieaerialfilms1429 11 месяцев назад

my arrow up and down does not snap. may i know whats the name of keyboard short cut for transient snap?

@JasonYadlovski 11 месяцев назад

Try searching the keyboard customization for 'jump to transient'

@ShubhCineverse 4 месяца назад

How do you import your video clips without their original audio, coz whenever i import video the audio also gets imported and i can't separately delete original audio of that clip? the video was great tho

@JasonYadlovski 4 месяца назад

First, bring your video clip into the media pool. Double click it to open it in the viewer. Then at the bottom of the viewer, you can just bring in the video only if you hover along the bottom of the viewer, you'll see a video clip symbol and an audio notes symbol. click, hold and drag the video only symbol into the timeline.

@ShubhCineverse 4 месяца назад

thanks @@JasonYadlovski

@slatercolt 6 месяцев назад

I'm hitting weird issues where the shift and arrow keys won't jump to the next marker in my timeline, I've tried mapping the keys in the customization panel too.

@JasonYadlovski 6 месяцев назад

I’d try giving everything a restart to see if that helps. It should work….

@BasNunnikhoven 11 месяцев назад

problem is that my timeline is in 50 frames. But still is not acurate to make cuts on the beat because the waveform is off compared to the frame size limit. So now cuts in footage is not exactly where it should be on the music. Can't I just edit on a music timing to no matter if half frames are being used?

@JasonYadlovski 11 месяцев назад

Sure, I'd say you can edit it however you'd like as long as it looks ok when you are done with the edit. 😜

@sergeyfilms Год назад

Hey! I hope you're ok. I'm very exciting about your new tool about noise reduction. I hope its name coming soon. But I have a question (maybe a stupid one) : How to export the tracks of my project to get all the tracks with their names (in wave for exemple) ? I can't do that ! THX from french guyana.

@JasonYadlovski Год назад

I haven't tried to do that, but you may be able to go to the File menu, then Export -> Timeline. You've got different formats you can use. You would just have to try them out. Or you can go into fairlight, go to the Timeline Menu and choose either Bounce Mix to Track or Bounce selected tracks to new layer. That might help. In addition, there are also presets for exporting in the Deliver page for Pro Tools, Avid, Premiere, etc. One of those might work too, depending on what you want.

@sergeyfilms Год назад

@@JasonYadlovski Merci !

@sandrotsomaia7332 Год назад

i turned on but i lines not visible ..... :( how to make it ?

@christophersmith-zn2kn 10 месяцев назад

Followed all your steps, got all the transients to show in fairlight and then when I go back to edit page transients don't show. And yes got transients turned on.

@JasonYadlovski 10 месяцев назад

The transients only show in the Fairlight Page, not in edit. You could view your video clips in fairlight. If you want to, it’s in timeline view options.

@PizentuDeWind Год назад

Edit at 17:48 just wrecked the sync. You dont notice it at the begining because the beats are even and the clips line up. But once the beat deviates even a little, the rest of your clips are out of sync. As shown at 18:04. I didnt know about the Transient method you showed though. That will be very useful. Thanks for the tip

@archibald_haddock Год назад

Good point, a roll edit would have preserved the rest of the sequence.

@grantmccotter8779 Год назад

When I right click on the clip there is no option for new compound clip?

@JasonYadlovski Год назад

Are you selecting multiple clips? You won’t get the option if only one clip is selected.

@grantmccotter8779 Год назад

@@JasonYadlovski no i realised its because I was already in the fairlight window not the edit window

@user-qo3gx7lx4p 4 месяца назад

new hack for anyone struggling with the equalising aspect: splitter ai. separates instruments on audio tracks so you've got just drums on an audio track. god bless AI

@JasonYadlovski 4 месяца назад

Nice, I’ll have to check that out. 👍

@deryadaliya Год назад

hello. I search alot but i didnt find the result. My track is not good working during the video time on timeline. I couldnt fix it. Could you help me for it?

@JasonYadlovski Год назад

Can you give me a little more info, what’s wrong with your track?

@deryadaliya Год назад

After 2-3 second sound start to thutter. On my another video i added some music again after 2-3 second start to slow and again thutter.but those are happining on edit page. When i do sound effect page. Everything normal

@JasonYadlovski Год назад

Are you sure it’s not just a playback issue? Have you tried rendering it out and seeing if the issue is still there?

@deryadaliya Год назад

@@JasonYadlovski i think smth broken. I delete everthing and load again. Now it is no problem. Thank u

@chaoticbrakepad Год назад

does transient detect not work for anyone else? the lines won't show up for me

@JasonYadlovski Год назад

Is it turned on next to the track name too?

@MichaelAddlesee Год назад

Interesting, but with classical music I edit to the phrase. Sadly there's no convenient tool for that, just have to use my ears ;-)

@JasonYadlovski Год назад

😜😁👍

@piecesandbytes Год назад

Cut should be 1 frame before the beat if you wanna get the right flow. But good tip.

@JasonYadlovski Год назад

Totally agree. 😁👍

@brooktheskeleton3973 Год назад

Ugh. It's been freaking months and the transient detection is still not working. It's making my video editing process slow and messy because the transient detection still not showing any lines. I had been following this video maniest times and I'm still stuck with this transient detection not showing it. Isolate it to the beat, no lines. Updating Davinci Resolve (18.1.1), still no lines. Following your videos especially the 6:34 one! And surprisingly no freaking lines even though I clearly pressed the transient detection on the tracks just like in your video and there it is, still no lines. Does anyone who using this Davinci Resolve had any of this kind of issue? I've been banging my head trying to make this work and it's frustrating. Can anyone for the love of god help me with this.

@JasonYadlovski Год назад

Sorry to hear they aren’t showing up for you, that’s a pain. I’m assuming you made sure they are turned in the 3 places - above the timeline, turned on below the track name and turned on in the timeline view options - all in Fairlight. If they aren’t showing, I don’t know why they wouldn’t be there….🤔

@brooktheskeleton3973 Год назад

@@JasonYadlovski Nope, I've done all that. Like what the heck is wrong with this? I might just like, give up with editing and hire someone to do it for me. And seriously, I've done this with 3 different laptop and computers, the problem still persist. I'm literally banging my head, just what the heck is the real problem here?

@JasonYadlovski Год назад

Without poking around I don’t know what might be going on…🤔

@brooktheskeleton3973 Год назад

@@JasonYadlovski There's no heck way I'm the only one suffering from this. Could you check if this problem is there in another laptop or computers if you have any? If the line is there, then I guess I'm just straight uninstalling anything edit related, because I would be wasting hours trying to fix a problem and finishing project when it supposed to be finished in minutes. God truly forbid me in trying with editing stuff.

@JustAPot Год назад

@@brooktheskeleton3973 I have the same problem, but luckily I fixed it. I can't explain it that well but this video should help you ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pQSuI8OyBMI.html

@billythecat Год назад

The only part that i dont get is equalizer T.T

@JasonYadlovski Год назад

I've got some videos on EQ if you need more help on it.

@bassamsalloum4247 11 месяцев назад

Sad that you cannot append a new video clip to the video timeline, (with the shortcut and not drag and drop), it'll always drop at the end of the music timeline instead of the video timeline, that's where FCPX stands out, user friendly..

@JasonYadlovski 11 месяцев назад

You should be able to append or insert a clip anywhere using the keyboard shortcuts. If it's not working with the default, you can try assigning a shortcut to the operation in Keyboard Customization.

@BassamfoxB 11 месяцев назад

@@JasonYadlovski thanks Jason, I assigned a shortcut key, however when my music is in the timeline and marked, anytime I try to append a new clip it goes to the end of the music timeline instead of of the video. Maybe you can make a video showing how all this works..

@projectfishinchannel33 Год назад

I didn't follow this was a bit quick for me

@JasonYadlovski Год назад

Sorry to hear that.

@projectfishinchannel33 Год назад

@Jason Yadlovski I'm new to resolve but I'm just giving you feedback as someone that doesn't know alot yet I'll figure it out just trying to help.

@JasonYadlovski Год назад

All good man I appreciate it, I’ve gotten that lot over the years. Once people brand new to resolve get going a little bit. They usually come back and find my stuff more helpful because it’s easier to follow along since I talk so fast. 😜👍 I blame the state of New Jersey for my fast talking. 😁

@projectfishinchannel33 Год назад

@Jason Yadlovski I will continue to follow appreciate your videos brother.

@JasonYadlovski Год назад

Thanks man, I appreciate you👍

@DAVE_WHITE Год назад

O your sound works? How nice.. Ever since the last update no matter what files I import that have sound I get none mp3 mp4 mov anything.. Support has no answer and I am on a paid version of studio 18... Yes I even cleared the video cache directory and other things to no avail. It is sad you PAY for software you can not use.. PHUCK RESOLVE I had to reinstall a very old editor that actually worked

@JasonYadlovski Год назад

Was your bus outputs all set properly? Did you check in preferences under system, video and audio I/O for your output device. There’s a lot of things it could be, it has it has to be fixable.

@DAVE_WHITE Год назад

@@JasonYadlovski Nothing I changed here at all I use the same camera and iphone to record it just stopped after the last beta studio update, I even contacted resolve who was no help had me cerate a zip file and nfo file of my system and send it in then they closed the ticket , they are zero help

@JasonYadlovski Год назад

Thanks for the reply. Have you tried all the tips in my videos to fix issues with no sound in resolve? ru-vid.com/group/PLsOqsM0-aW4F-7raWNn5Kc-j8wHXA6QYX You can also check the comments on those videos, people have found other things that fix the issue too. For some reason this issue has been around for a while and it always seems to be something different for everybody.

@DAVE_WHITE Год назад

@@JasonYadlovski Resolve menu Preferences, it was set to nvidia instead of my Realtek sound device wired speakers ) Maybe after a last nvidia update it got default? CRTL panel is realtek sound card which is connected to wired speakers the only device I use

@redent84 Год назад

This comment is sponsored by Artlist. Hi This comment is sponsored by Artlist.

@JasonYadlovski Год назад

Haha that’s great for you! 😜👍

@2424rocket Год назад

Really? I love so many of your videos but now you’re telling people to “edit to the beat “?? That’s so pathetically cliché. And you should never edit to the beat. Yes some of the cuts can be to the beat, but if they’re all to the beat then it becomes monotonous, predictable, boring.. You’re supposed to edit to the content of the shot, not to the beat. Oh my, Stanley Kubrick is turning in his grave.

@JasonYadlovski Год назад

Haha, some people just wanna know how to do it. This is how I’d do it. I just give the info, viewers can decide if they want to use it. 😁 thanks for watching Allen!