In this video, we'll guide you through the simple process of erasing the calibration on your M521 Controller. Whether you want to start fresh, make adjustments, or troubleshoot, erasing the calibration is a quick and easy task. Let's get started!
Step-by-Step Calibration Erasure Guide:
1. Press the MODE button on the controller. Ensure that the pump is not running and that the manual mode is displayed on the screen.
2. Press and hold the STOP button located on the controller. Keep holding it until you hear a beeping sound from the controller.
3. Release the STOP button. By doing so, you have successfully erased the calibration on your M521 Controller.
4. There are various reasons why you might need to erase the calibration on your M521 Controller:
- Resetting to Default: If you want to return the controller to its original factory settings, erasing the calibration will remove any customized or adjusted parameters, allowing you to start fresh.
- Changing Equipment or Setup: If you've made changes to your pump system, such as replacing the pump or modifying the piping network, erasing the calibration enables you to recalibrate the controller based on the new setup.
- Recalibration: If you're not satisfied with the current calibration settings and need significant adjustments, erasing the existing calibration provides a clean slate for recalibration.
- Troubleshooting: In cases of issues or erratic behavior with the pump system, erasing the calibration can help identify whether calibration is the problem. It allows you to start fresh and rule out calibration-related issues.
Remember to exercise caution when erasing the calibration, as it will remove any customized settings. Make sure to have a backup of your previous calibration settings if needed.
Thank you for watching. If you have any questions or need further assistance, please leave them in the comments below.
Don't forget to subscribe to our channel for more informative guides.
18 сен 2024