How to find out and check the Suzuki Smash 110 motorcycle CDI is still alive or dead. The steps we have to do and check are as follows: 1. Make sure the green wire with white line as the pulser mass and the positive pulser reaches the pin of the CDI socket. 2. make sure the white cable line as charging from the spool has current going to the kiprok. 3. make sure the red cable is drained or the battery drain has current going to the contact and when the contact is on, make sure the current reaches the CDI socket pin. 4. Make sure the orange cable is current plus the battery or the red cable kiorok output has current in the CDI socket when the contact is turned on. 5. Make sure the black line and white line as the CDI mass is attached to the motor frame. 6. Make sure there is ignition current coming out of the CDI socket with a white wire and a blue line going to the coil, provided that the four cable lines in the CDI socket are functioning. If there is no ignition current output from the CDI, then we can conclude that the CDI has been dead or damaged. Thank you very much to all viewers and subscribers, I hope the knowledge is useful. Please Subscribejya @ibotmotorchannel6334 If you have questions, please write in the comments column. Thank you very much.
26 янв 2023
