NIGEL, I can look up the VIN later if need be. I need a front emblem for the newly acquired 1996 BMW Z3 Roadster with the 1.9-liter engine. I do see 4 pins that seem to be needed. Thank you for your time and consideration.
If you see 4 holes then you need to remove the base of your old badge. This will reveal 2 holes where the new badge fits. This is the badge that you need www.nm-motorsport.com/bmw-boot-and-bonnet-badge-51148132375-c2x20759620
That badge isn't on my website but I can get it. Email me with the last 7 digits of your VIN number and I can price both the badge and the mirrors nigel@nm-motorsport.com
Hi, helpful video thanks 👍 what's the part number for the 2nd badge you picked up please? I have a 2009 Alpina D3 Biturbo and I'm in need of that badge. Thanks
Im not sure which badge that was. If you give me the last 7 digits of your VIN number and tell me if you want it for front or back, I can tell you which is the correct badge for your D3
Thanks for these great videos. What's the right trunk emblem for the 2005 BMW 745i. I'm finding only the front emblem but not the rear trunk one. Are they the same?
The front and rear emblems are different. I can supply the genuine rear emblem. Email me at nigel@nm-motorsport.com to tell me where you are and I will give you a price with shipping.
I have a 2015 6 series F06 that I need a new hood and trunk badge for. Last 7 of vin D453271. My hood “does” not have holes at all for grommets. It has two posts so my assumption is the badge has the holes with grommets for mounting. I can provide a pic of the hood for clarity. Thanks
This is the badge that you need. I will have more stock in around a week. If you need the grommets, I will have to order them specially as they are usually not needed. Email me nigel@nm-motorsport.com www.nm-motorsport.com/original-bmw-boot-bonnet-and-side-badge-51147057794-29-p.asp
Hello.. I'm hoping you can help, what badge do I need for a 3 Series (E46) 330ci Convertible 2002 ? It's smaller than most boot badges & after watching your video I don't want to search purely on size. Also, don't really want to prise it off to find the part number..
Hi, I have a BMW 4 series gran coupe m sports 66 plate. Can't seem to find the right bade for my hood. It has 2 narrow ish prongs on the hood so I'm assuming my badge needs 2 holes for it to stick on to the hood. Thanks
The bonnet badge on my 2001 530i was stolen. There are no grommets, just remnants of adhesive backing. What is the correct replacement roundel? I can only find the 2 pin/grommet version online (ending 375). Last 7 of the VIN is CF02943. Thanks!
It sounds like the base of the badge is still on the bonnet. You need to remove this and you will then see the 2 holes tat the new badge fits in to. The badge you need is in this link: www.nm-motorsport.com/bmw-boot-and-bonnet-badge-51148132375-c2x20759620
Hello Sir, the front badge of my 520d estate 2009 has been stolen. There are 4 holes giving shape of "x". Could You kindly tell me what badge I have to buy? Thanks in advance. Regards.
If there are 4 holes, the base of your old badge is still attached. You need to remove this before you can fit a new badge which will reveal 2 holes. The correct badge is in this link www.nm-motorsport.com/bmw-boot-and-bonnet-badge-51148132375-c2x20759620
If it has 4 holes then the base of the old badge is still on the bonnet or boot. This happens to badges with the part number ending 375. You can find it using this link: www.nm-motorsport.com/original-bmw-boot-and-bonnet-badge-51148132375-26-p.asp
If it has 4 holes then the base of the old badge is still on the bonnet or boot. This happens to badges with the part number ending 375. You can find it using this link: www.nm-motorsport.com/original-bmw-boot-and-bonnet-badge-51148132375-26-p.asp
The front badge is here www.nm-motorsport.com/bmw-boot-and-bonnet-badge-51148132375-c2x20759620 and this is the rear badge www.nm-motorsport.com/bmw-boot-and-bonnet-badge-51148132375-c2x26231595
and where can you find the correct oem number for the badge of your car ?i have an e93 330d lci and have looked everywhere for a boot badge replacement ,its smaller than the rest 70mm in diameter
Hello, my front badge was stolen recently. It’s an f40 M135i. 21 plate. It looks like it’s the badge with the 2 prongs at the top but would you be able to confirm please? Thank you
Hey Nigel, looking for the trunk badge for 2006 330 convertible, part no 51.13-7 019 946 looks to be 60mm - cant find it anywhere.. any help would be appreciated.. cheers...
Hi,mate where did you purchase these? I bought twice as original cost me 40 £and they are not as mine Bmw logo with glass filled they are kind a popped out contours and letters!? I had to return them back!
Inguss Mezals www.nm-Motorsport.com all genuine BMW wheel badges are the same design as those in the video. I don’t understand what glass filled means?
@@nigelmarstonmotorsport77 original ones are flat and glossy like in your video!I bought couple where the metallic letters are popped out and middle circle crossed lines too...
These are the badges that you need nm-motorsport.oxatis.com/bmw-boot-and-bonnet-badge-51767288752-c2x29639417. and also nm-motorsport.oxatis.com/bmw-boot-trunk-motorcycle-badge-51148219237-c2x21279910
My factory badge was silver at back and the front was just a sticker on silver metal. The cheap ebay one I bought off amazon was black at back and painted front. The paint washed off after 1 year.
CoolDoob the most common original bonnet or boot badge with the part number ending in 375 has been black on the back for many years. They used to be silver but that was over 10 years ago
@@nigelmarstonmotorsport77 Well, obviously it's more likely for older cars to need new badges. Genuine parts will have the BMW logo on the plastic. If your black plastic ones have the logo, then sure its genuine. No logo means ebay part.
@@nigelmarstonmotorsport77 Point me to a fake badge with bmw logo, I will go buy a couple. I am in need of them just now. If yours have no logo, I would not buy them even if genuine. Not that I need genuine. But I would consider those with a logo to be a good deal.
Hey Nigel could you tell me the badge i would need for my front bonnet please someone just nicked mines off my car. The last seven digits of the VIN is PW81224
Do you mean the badge on the side of your bike? Tell me the last 7 digits of your VIN number so I can identify the badge for you. Either reply here or email nigel@nm-motorsport.com
To be sure, I would need the last 7 digits of your VIN but I am pretty sure its going to be this badge www.nm-motorsport.com/bmw-boot-and-bonnet-badge-51148132375-c2x20759620
@@jak2i00i 2 but almost all BMW badges have 2 pins. If you see 4 small holes then the base of your old badge is still there and needs removing before you can fit a new badge
Adam Norström I only use part numbers because there can be several badges that are the same size but with different fittings and shapes. I can supply the correct original badge. Email me nigel@nm-motorsport.com
SignalSource the badge I was referring to has the part number ending 375. All current genuine versions of this badge have a black back. Many years ago the back used to be silver but not any more. Fake badges with this part part number have a silver back and all the relevant BMW markings but they are fake. Badges with a different part number may still have a silver back like one I showed in the video
Nigel Marston Motorsport Mine is silver metal and is not fake! Its my original bmw badge and i bought thr bmw from the factory then ( its now a vintage car though!!)