How To Fit a Fence Post to a WALL

Подписаться 12 тыс.

Просмотров 231 тыс.

50% 1

Here I show you how to fit a fence post to a concrete house wall. Sometimes there is a need to fix a fence post to a concrete wall such as a house, garage or garden wall. I show you how to securely fix the fence or gate post to the wall. This method ensures an absolutely solid base on which fence rails can be secured or a full sized fence gate can be hung from.
Fixing wooden posts to concrete walls can seem fairly daunting, but with the right tools and the right fixings, the job is actually very simple. There are many situations where this may be required, it is not unique to fencing or hanging gates. The methods shown can be used for fixing any timber to masonry concrete structures or walls. The Timco Multi fix concrete screws provide a very strong fixing which will cope with many heavy duty applications.
I hope that this video helped you in some way, and if it did, please leave a comment for me in the comments section. I love to hear from people who gained value from any of my videos. I always respond to comments, so would be great to hear from you guys ! 👍
If you need to fit an actual 4x4 or 3x3 fence post a wall, please check out this video • How To Fit a (4 x 4) F...
My Amazon SHOP where I have listed all of the tools and equipment that I use for anyone that is interested www.amazon.co.uk/shop/bacrenp...
LINKS to all items featured in the video - (which will help you get the right tools for the job)
32mm Spade drill bit - amzn.to/3cHrjt8
10mm Auger drill bit - amzn.to/3dS6gUS
8mm x-force SDS masonry drill bit (for SDS Drill) - amzn.to/2ZeQlMi
8mm standard masonry drill bit (for normal hammer drill) - amzn.to/3e0JQB3
TIMCO 100 X 8mm Multi-fix screws (Thunder bolts) - amzn.to/2LBnQjN
M10 X 30mm Penny washers - amzn.to/3fXA8AV
Cuprinol clear wood preservative - amzn.to/36a4MCY
Dewalt 18v SDS drill (Bare tool) - amzn.to/3cI4eGy
Dewalt 5AH 18v Battery - amzn.to/2zPfQJC
Dewalt 18v Hammer Combi drill (Bare tool) - amzn.to/2TbdJq8
Dewalt 18v Circular saw (Bare tool) - amzn.to/3bFk8QM
Swanson speed square - amzn.to/3cKQivC
Dewalt 16oz hammer - amzn.to/3bHAkkH
Bahco Ratchet - amzn.to/3cJubpe
Stanley 15mm Socket - amzn.to/365OLxN
Stanley Fat Max 4ft Level - amzn.to/2zIiRv4
Sharpie Markers - amzn.to/3cFLnvP
TIMESTAMPS
0:00 Introduction
0:37 Marking the Post
0:51 Cutting the angle on top of the post
1:45 Drilling holes in the post
2:35 Showing the Fixings
4:05 Treating the holes and cuts with preserver
4:55 Fitting the post
9:34 Final thoughts and outro
Disclaimer - The Amazon link is an affiliate link and I may receive a very small commission if the item is purchased through the link, but it does not cost you anything. This helps support my channel and enables me to keep posting free content on a weekly basis.
LINKS To all the production equipment that I use -
MOVAVI Editing software that I use - store.movavi.com/order/produc...
RODE Smartlav+ AUDIO Lavalier Microphone for smartphone - amzn.to/3dSLN2h
RODE SC1 Microphone extension lead - amzn.to/366jrih
DJI OSMO 3 GIMBAL - amzn.to/3bAM4VX
JOBY GRIPTIGHT phone holder - amzn.to/2z6Hj9x
70" Camera tripod - amzn.to/2z35qpx
Epidemic sound music and sound effects - www.epidemicsound.com/referra...
Tubebuddy software for new youtubers - www.tubebuddy.com/BACREN73
You can Donate to the channel here if any of my videos helped you in any way, this would be highly appreciated and also helps me grow the channel in future - paypal link paypal.me/bacrenproperty?loca...
- Thank you !
Thanks for watching and if you enjoyed the content, please LIKE and SHARE the video and please consider SUBSCRIBING to my channel / @bacrenfencing
to see more similar content in the future. This would mean a lot to me and be greatly appreciated 😊
#bacrenproperty #howtofitfenceposttoawall #fixfenceposttowall #fitfenceposttohouse #fencepostonhousewall #fitfenceposttoconcretewall #fitfenceposttobrick #fitfenceposttoblockwall #installfencepostonwall #fencepostonwall #howtofitfenceposttoawall #howtoinstallfenceposttoawall #howtosecurefenceposttowall #fixposttowall #securefenceposttoconcrete
Please contact me (Barry) on the following email for any general or business related enquiries - bacrenproperty@gmail.com

Хобби

Опубликовано:

21 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 343

@Bacrenfencing 3 года назад

All tools, equipment and consumables that I use can be found in my Amazon shop www.amazon.co.uk/shop/bacrenproperty

@archiebob11 2 года назад

Ordered all the ironmongery I needed from here 👍

@Bacrenfencing 2 года назад

@@archiebob11 Thanks Mark, much appreciated !

@Bonartist 2 года назад

Used this exact same process step-by-step over the weekend to fix 2 x posts for a side gate on my house. Worked perfectly, thank you!

@Bacrenfencing 2 года назад

Glad it helped David and thanks for the comment !

@squadmoralerestored 2 года назад

I've done this exact job today (which I was initially dreading, kind of out of my comfort zone) but your vid made it look straightforward. I picked up some extra tools and bolts from your affiliate links and I ended up really enjoying seeing my mini-project come to life. The post is now nice and snug and I just wanted to say a BIG thank you :)

@Bacrenfencing 2 года назад

Brilliant to hear, I am happy that the video helped you overcome your fear of doing this yourself. Thanks again for the comment and thanks for using the affiliate links, much appreciated. All the best ! 👍😎

@oliverfytche-taylor1673 4 года назад

Really helpful guide, and I appreciate the extra time you have spent providing links to the products too

@Bacrenfencing 4 года назад

Thanks for the comment Oliver, I am happy that this helped you out, thanks again 👍😎

@archiebob11 2 года назад

Great job, simply and clearly explained. I’ve got this exact job to do this weekend for double gates, thank you for taking the time to make this video. 👏👏👍

@Bacrenfencing 2 года назад

Glad it was helpful Mark and good luck with your project 👍😎

@redd605 4 года назад

I just come across your video and it's exactly what I was looking for my fence to my house has rotten,and to replace . great detail and explaining

@Bacrenfencing 4 года назад

Hi and thanks very much for the comment. Yes, it is a common problem and there is not a lot of information out there on how to go about doing this job. I am glad the video helped and good luck with the repair ! Thanks again for the comment, much appreciated ! 👍😀 PLEASE , LIKE, SHARE and SUBSCRIBE 👍😊

@mariza101_ 3 года назад

@@Bacrenfencing me too thanks so much

@Bacrenfencing 3 года назад

@@mariza101_ No problem !

@davien8297 4 года назад

Great video mate, I have been using those fixings for a while now and always use an impact driver to tighten them up. I think your method is far better with the ratchet as more times than not I will over tighten and put the timber under strain. Cheers for the heads up.

@Bacrenfencing 4 года назад

Thanks Davie, I always use a ratchet when tightening these now because they are very easy to over tighten and strip out the concrete, especially on modern house walls. You know what it's like. strip the concrete out (bolts keep spinning) and end up having to put in 10mm diameter fixings as opposed to original 8mm............I learned from bitter experience 😫😥 Yes, they can take a hell of a grip on some substrates and it is easy to strain the timber as you say ! Thanks for the comment 👍✊😀

@BORELL1 3 года назад

Excellent instruction. Well filmed too. Thank you. Needed this today. Respect from Glasgow!

@Bacrenfencing 3 года назад

Thanks for the kind words - respect from Aberdeenshire ! 👍😃

@ianmarsden8568 3 года назад

Thanks for the video. New to the channel and have just watched a couple of videos so far. Very in formative and well put together - I particularly love the way you mute the tool noise so that it almost does not appear. Its so soothing. Its not like people don't know how power tools sound, but you are the first person Ive come across that does this. Cheers.

@Bacrenfencing 3 года назад

Thanks again Ian, yes, there is nothing worse than chilling out, watching a video when all of a sudden, you get the scare of your life with a power tool going off at full volume. I usually lower the volume by 90% on those parts - still learning all this youtube stuff, so hopefully I will improve as time goes on. Thanks for the comment, much appreciated ! 👍😍

@Nayo68 3 года назад

What?? Did he mute the drill's noise? All my afternoon wasted trying to find a soundless drill at several hardware stores!! Crap!! 😬

@piersgooderham8674 3 года назад

@@Nayo68 😁

@arthurkettle3010 4 года назад

Perfect DIY video... thorough and clearly explained. Cheers 👍

@Bacrenfencing 4 года назад

Thanks Arthur, I am glad the video was helpful, thanks for the comment 👍😎

@seandiviney7381 3 года назад

Perfect just what I need, my gate post has come loose, bolts rusted, so just the exact job. Great demo and explanation

@Bacrenfencing 3 года назад

Glad it helped Sean, thanks for the comment 👍😀

@egorbiletskiy2950 3 года назад

Splendidly to see Woodprix have new plans which helped me save some money and energy for this construction.

@Bacrenfencing 3 года назад

...

@egorbiletskiy2950 3 года назад

@@Bacrenfencing Cheers brother ❤️

@thomaswright2614 Год назад

I copied this guy exactly and built my fist fence... building second one now and came back to refresh my mind 💪

@Bacrenfencing Год назад

Thanks for the comment Thomas, glad you find my videos helpful 😎

@thomaswright2614 Год назад

@@Bacrenfencing Cheers buddy... Those concrete bolts do the job btw

@kevinquevem 2 года назад

Apart from being a great instruction video, I wanted to see how well these threaded anchor bolts work in cement block walls. You make it clear they work well and look much easier to use than sleeve or wedge bolts. Thanks.

@Bacrenfencing 2 года назад

Glad it was helpful Kevin, thanks for the comment 👍

@McPhan86 2 года назад

Thanks for this! Complete newbie here, penny pinching and so hoping to put a gate in myself! Will have to do exactly what you've done as the gate is going between a garage wall and the house.

@Bacrenfencing 2 года назад

Great, I am sure you will be fine, just follow the video and you will be OK. Thanks for the comment 👍

@faheemashraf9716 3 года назад

Thanks mate, excellent tutorial. Not easy explaining, and recording with one hand. Great job. 👍

@Bacrenfencing 3 года назад

Glad you liked it Faheem and thanks for the comment 👍

@1davhar Год назад

Great video, with clear and precise instruction - this is just what I needed.

@Bacrenfencing Год назад

Glad it helped Dave, thanks for the comment

@ChrisC-kh4tp 2 года назад

Great video, I have an upcoming project to repair hit n miss fence panels between wall pillars so this video is very helpful. Thank you.

@Bacrenfencing 2 года назад

Glad it was helpful Chris, I made another video on how to fit a 4x4 post to a wall as well, if that is something you would be interested in - you can see it here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5lf6d8dnLXA.html

@heroknaderi 3 года назад

Very detailed and informative I appreciate your time. I enjoyed watching your video 😉👍

@Bacrenfencing 3 года назад

Thanks Kevin, much appreciated and I am glad you enjoyed the video 👍😀

@thewmavideos 4 года назад

Just what I needed, thanks Bacren Property!

@Bacrenfencing 4 года назад

No problem Simon, I am glad you found the video useful - thanks for the comment 👍😀

@davemcdave2169 Год назад

Brilliant big man. Doing this over the weekend. Your video confirmed what I need to do. Thankyou sir.

@Bacrenfencing Год назад

Glad it helped Dave, thanks for the comment !

@jacksonmusgrove60 3 года назад

Fantastic video! I’m having to buy a wider gate (1.2m by 1.8m) for back garden to allow easier access for my Iron 883. Been trying to figure out all day how go about trimming down the concrete block wall and this was the last thing to figure out. Brilliant work, I’ll get cracking on this Sunday 👍🏻 gonna check out rest of your vids now

@Bacrenfencing 3 года назад

Thanks Jackson, I am glad the video was of some help to you 👍😀

@jacksonmusgrove60 3 года назад

@@Bacrenfencing thanks buddy, got another question, but it’s shed wooden base related, it was prebuilt before I moved in (8 x 6), I’m wanting to strengthen the floor but I need to know where the joist/beams are so I have a screw anchor point? Relative newbie at all this and don’t have X-ray vision of course so at a loss (in my tiny brain) how I can safely get to see the base frame joists without making my shed fall down 🤣 thanks in advance

@moorshound3243 9 месяцев назад

Can I give you some advice, whatever you do never ever sell your 883 I miss mine so much like I sold a part of me. Look after that iron horse. Ride hard roll free...

@daveregan8410 3 года назад

Great tip 30° angle.doing this project in next couple of weeks Thanks learnt a lot top video.

@Bacrenfencing 3 года назад

Glad it helped Dave and good luck with the project ! 👍😀

@Titot182 4 года назад

Stumbled across your video because the house builders have done a shoddy job putting our gate post in. They drilled into mortar using torx head fixings, resulting in pulling away. I'm liking the idea of countersinking the head and using the hex heads. I feel more at ease tightening with a ratchet than with a screwdriver or drill.

@Bacrenfencing 4 года назад

Thanks for the comment. Yes, when fitting a gate post or anything for that matter, always best to drill in to the actual brick or block, never drill in to the actual mortar of the pointing. Also, best to use a ratchet for tightening the bolts as you have more control that way. If you use an impact driver, there is always the chance that the bolts strip the created thread in the concrete and they will just end up spinning and not getting a grip. The bolts only need to be nipped up, not crazy tight.

@Titot182 4 года назад

@@Bacrenfencing Much like you don't use a pillar drill to cut in a new thread on a metal flange or boss. An 8mm SDS would do the job? Post is nominally 50mm thick, countersunk 10mm, I'd be fine drilling 65mm into the brick and then slowly ratcheting in? I saw how ridiculous and shabby the erection job was with the screws going in off 90°. It wasn't even centrally spaced down the length of the post! Cheers for your reply though!

@Bacrenfencing 4 года назад

@@Titot182 Thanks for the comment, I am not the sort of person to worry about masonry screws going in at a perfect 90 degree angle. This is fitting a piece of wood to a wall, not precision engineering. The holes were spaced for my specific application (matched the fence rails) and were not meant to be evenly spaced, I mentioned it in the video as usually you would space them evenly.......but every application will be different. Thanks for the comment :0)

@ukharrythomas007 4 года назад

So clear, thank you !

@Bacrenfencing 4 года назад

Glad it was helpful! 👍😎

@fieldlv 3 года назад

Thank you so much for this video. I was looking to do the same but wasnt sure. Your video is so simple and clear to understand. BTW you sound like my colleagues from work from the NE Scotland. Keep up the good work pal.

@Bacrenfencing 3 года назад

Glad it was helpful and say hello to my fellow NE Scotlanders 😎💪

@malcolmbaptie5156 3 года назад

Brilliant, just what I needed!

@Bacrenfencing 3 года назад

Glad it helped Malcolm, thanks for the comment 👍😍

@aphacia 3 года назад

Fabulous video! And thank you for your tutorial, I have finished my fence same way with ankascrew in Aussie.

@Bacrenfencing 3 года назад

Glad it was helpful! 👍

@jb-sz2kw 3 года назад

Perfectly explained. Thank you.

@Bacrenfencing 3 года назад

Glad it was helpful! 👍😃

@TheBigT79 3 года назад

Absolutely marvellous. 👌

@Bacrenfencing 3 года назад

Thanks Tony, I am glad you liked the video ! 👍😃

@davidrasmussen5537 3 года назад

Clear and concise. Thank you.

@Bacrenfencing 3 года назад

Thanks for the comment David, I am glad you found the video useful ! 👍😃

@SuperFurryAnimalPhil Год назад

Simple, practical, efficient. Thank you.

@Bacrenfencing Год назад

You're welcome!

@Falwheel Год назад

Awesome, need to do this soon. Thought I’d need some sort of resin. Was dreading attempting this but thanks to your vid I’m feeling a little more confident 👍

@Bacrenfencing Год назад

It is very easy to do if you have the right tools and fixings - thanks for the comment !

@chrisgoostry9932 3 года назад

Need to fix me a garage door frame into brick- great advice here for order of hole drilling and fixing. Many thanks.

@Bacrenfencing 3 года назад

Glad to help Chris, thanks for the comment 👍

@Bltrommer 3 года назад

Good stuff, buddy! 👍🏼

@Bacrenfencing 3 года назад

Glad you liked it Benny ! 👍

@InspireDIY 4 года назад

great video, nice clear audio.. well done

@Bacrenfencing 4 года назад

Thank you kindly! 👍😀

@reasonandlogic4652 3 года назад

Superb video. Very clear to understand.

@Bacrenfencing 3 года назад

Glad it was helpful! Thankyou 👍😃

@Thriving_Tribesmen 3 года назад

Thank so much for this video, amazing

@Bacrenfencing 3 года назад

Glad it was helpful! 👍😃

@itsallrobbish 2 месяца назад

Spot on, thank you. Subscribed!

@Bacrenfencing 2 месяца назад

Awesome, thank you!

@timkeagy4094 3 года назад

I'm building a gate and was very hesitant about drilling in my house. Not anymore. Thanks for your video.

@Bacrenfencing 3 года назад

Glad I could help Tim, thanks for the comment 👍😀

@charlesmair26 Год назад

Thanks, man, that gives me all I need to know to instal my gate post.

@Bacrenfencing Год назад

Glad I could help

@alvinmyers5569 3 года назад

great info and video thank you from Canada

@Bacrenfencing 3 года назад

Glad it was helpful Alvin and give my regards to Canada, I love that country ! 👍😎

@thomashosking385 Год назад

Thank you for this video - very useful advice.

@Bacrenfencing Год назад

Glad it was helpful!

@snotnosedlilkid 3 года назад

Brilliant 👍

@Bacrenfencing 3 года назад

Thanks 👍😍

@gamadame4476 3 года назад

Well done very helpful for me thank you!

@Bacrenfencing 3 года назад

Glad it helped Dale, thanks for the comment 👍😀

@PuReJellybean 3 года назад

Brilliant video thanks

@Bacrenfencing 3 года назад

Glad you enjoyed it Sean 👍😀

@anonimaja324 3 года назад

Halo Sir, I am from Indonesia.. thank you for your tutorial...it helped me so much.. 😊😊🙏🙏.. I will applying to my brick wall fence... Sorry for my bad english.. Thank you very much...😊😊🙏🙏.. Great Success for you..😊😊👍👍

@Bacrenfencing 3 года назад

Thank you for the comments 👍

@davidhayes9436 3 года назад

Great video, thanks. Any reason not to use these bolts On a rendered external wall to fix a gate? Thanks again 👍🏼

@Bacrenfencing 3 года назад

Hi David, No, these bolts would be fine for that purpose. Thanks for the comment 👍😃

@antw289 2 года назад

Great video! 🙂

@Bacrenfencing 2 года назад

Thanks! 😊

@pb9926 4 года назад

Great video 👍 I didn't catch what type of sds bits you use ? Them multi fixings look much better than frame fixings which I've used in the past. Looked like a lovely spot where you were working from what I could see from background scenery 😎

@Bacrenfencing 4 года назад

Hi PB, Thanks for the comment. I use HELLER X-FORCE SDS drill bits amzn.to/2X5xz7v Working at my own house, struggling through the wife's "to do list" - thought I may as well film some of the jobs as I go. Yes, we are fortunate to live in a lovely location in the countryside - very idyllic ! 👍😀

@pb9926 4 года назад

@@Bacrenfencing many thanks for the prompt reply - I will definitely get some of those drill bits as I'm always using sds bits with my work. My wife has also handed me a to do list that seems to get longer everyday even though I'm doing the jobs, funny that 🤔 Many thanks again 👍

@Bacrenfencing 4 года назад

@@pb9926 Yes the Heller x-force bits are brilliant, worth shopping around for them, get some good deals on Ebay for all the different sizes - highly recommended ! Yes, I can sympathise with your ever growing "List"............

@davidroberts8671 4 года назад

Great video for a beginner like me. I want to attach 2in timber to a 4in thick block wall. What size bolt would you recommend?

@Bacrenfencing 4 года назад

Hi David, Thanks for the comment. You would probably get away with M6 X 100mm bolts like these amzn.to/39I27Cb but it really depends how much load you will have on the timber (what the timber is going to be used to support). If it is going to be quite a high load, then you can use M8 or M10 bolts (100mm long). Hope this helps 👍😀

@ishy_5217 Год назад

Very helpful 👌🏻

@Bacrenfencing Год назад

Glad it was helpful!

@CoderTronics 2 года назад

Thanks really clear good instructional video, is there any ideal fixed depth for the fixings to penetrate the wall?

@Bacrenfencing 2 года назад

I usually ensure that they are at least 50mm into the wall, but it obviously depends on the thickness of the wall. 50mm is a good starting point. Thanks for the comment

@soldier-Dave 3 года назад

Excellent video.well explained.thank you !

@Bacrenfencing 3 года назад

Glad it was helpful !

@soldier-Dave 3 года назад

@@Bacrenfencing please can you tell me what type of screw I should use to fix a small wooden porch to my Yorkshire stone cottage. ?

@Bacrenfencing 3 года назад

@@soldier-Dave Hard to say without actually seeing the porch, but if it is in to yorkshire stone, then probable best with frame fixings such as these amzn.to/2NVW6LG

@irfanulhaquesports2398 3 года назад

Thanks really nice video giving me confidence to do my fence myself . Any video to fix poles between two fence panels.

@Bacrenfencing 3 года назад

Thanks for the comment and sorry, I don't currently have a video regarding fixing posts between panels.

@elvvee1982 3 года назад

Great informative video thank you

@Bacrenfencing 3 года назад

Glad it was helpful!

@colinmoore68 Год назад

Very well executed job, very helpful. What are your thoughts about cutting the bottom of the post to clear the ground and avoiding soaking up moisture?

@Bacrenfencing Год назад

Thanks, Yes you are best to leave around a 50mm gap between the bottom of the post and the ground. If you have the cut end down, make sure and treat the end grain with plenty of clear wood preserver or paint. Hope this helps. Thanks

@beanslok2105 3 года назад

Thanks for the video! I’m wondering how much distance you left between the ground and the bottom of the post?

@Bacrenfencing 3 года назад

About 2" or 50mm - Thanks

@scottishjimmy9813 3 года назад

Hi, thanks for a great video. I am a bit confused on the socket size you are using on the ratchet, you said it’s 15mm but is the bolt not 8mm? Thanks

@Bacrenfencing 3 года назад

Hi, Yes it is an 8mm bolt which is the size of the actual bolt thread, but the head of the bolt is 15mm, so you will need a 15mm socket to tighten the bolt. Thanks for the comment 👍

@jonathancalvert4335 3 года назад

Really useful, thank you. I have 100x100 posts which I will hang a heavy side gate to. What length bolt/screw would you use? Is there a set length that it should go into the brick?

@Bacrenfencing 3 года назад

Thanks Jonathan, If using a 4 x 4 post, I would use either 8 x 130mm multi fix bolts or even go up a size to 10 x 130mm. Also, drill a deeper 32mm recess in the post which will mean less material to go through - in other words, drill a 25-30mm recess and use 130mm long bolts, that should be fine. I hope this makes sense. Thanks 👍

@CoderTronics 2 года назад

Really useful information and answered a question I have, so basically you want the fixing to go into the brick about 60mm

@2icelollys1goat Год назад

Brilliant, helpful video

@Bacrenfencing Год назад

Glad it was helpful, thanks for the comment

@woodbine66 3 года назад

What were the drill bits you were using? Never seen those before. Thanks for an excellent video.

@Bacrenfencing 3 года назад

Hi, They are HELLER 4 CUTTER SDS drill bits, you can get them on ebay via this link www.ebay.co.uk/itm/PREMIUM-QUALITY-CROSS-HEAD-SDS-PLUS-DRILL-BITS-4-Cutters-Concrete-Rebar-Masonry/202323611334?hash=item2f1b6d4ec6:g:JDcAAOSwoNVa6HC4

@moorshound3243 9 месяцев назад

Really good video many thanks.

@Bacrenfencing 8 месяцев назад

Glad it was helpful!

@user-kb3ng3xw8y Год назад

Thanks for posting, really helpful. I'm going to be following this video when I do my gate and fence. What size posts did you use, are they 4 x 3 inch?

@Bacrenfencing Год назад

Thanks, the post on the wall is 4 x 2" and for the fence I always use 4 x 4 " posts. Hope this helps.

@casebookfilms611 3 года назад

Nice video. Thank you. Quick question, is it easy to overtighten these concrete screws and of you do, do they then lose their grip and spin? I assume thats why you are hand tightening them. Cheers

@Bacrenfencing 3 года назад

Thanks, Yes they can be easy to over tighten and strip the hole, that is why I use a ratchet as opposed to an impact driver when tightening them. Thanks 👍

@ericbrown1020 4 года назад

Great video thanks for posting (no pun intended)

@Bacrenfencing 4 года назад

Thanks for the comment Eric - much appreciated ! 👍😀

@bennym2893 8 месяцев назад

Hi there, nice video, and well explained. I'm looking to fix a decking baton along the rear of my house, would you recommend these screws, or something a bit sturdier like Rawlbolts as at times it may be taking the weight of a few people etc. Many thanks :)

@Bacrenfencing 8 месяцев назад

Thanks, yes, these screws are perfect for that, but get a larger size 10mm or 12mm in diameter. Then you can choose the length you need.

@edwing8862 4 года назад

Do you think it will be sturdy enough for me to install a pvc privacy gate attached to just that wood like how you have it setup?

@Bacrenfencing 4 года назад

Hi Edwin, It obviously depends on the width and weight of the gate but I regularly hang very heavy custom made gates using this method. If in any doubt, just use larger bolts, I sometimes use M10 X 130mm if the gate is going to be heavy. I hope this helps 👍😃

@petanders1968 3 года назад

I enjoyed your tutorial, is there a reason why you would just treat the new holes in wood with wood preservative and not the whole piece of wood ?

@Bacrenfencing 3 года назад

Thanks. Yes, the wood is all pressure treated, so it is only when you cut it or drill it that it exposes BARE wood. When wood is pressure treated, the treatment only penetrates the wood about 5mm, so when you cut or drill the wood, you expose wood that has not been treated - hence the reason you need to treat it. I hope that this clarifies for you ? Thanks

@XV24 3 года назад

Great advice, I'm doing this job to fix a gate post. Is it right that you use a 8mm screw and a 8mm drill bit? I'm an total amateur, but would this allow the screw to bite properly if its the same width? Cheers

@Bacrenfencing 3 года назад

Thanks, yes, you use an 8mm drill bit with the 8mm multi fix bolt. The bolt diameter (excluding the threads) is 8mm but the threads on the bolt make the bolt about 10mm if you know what I mean, so use an 8mm drill bit.

@robertburns8999 4 года назад

Hi, excellent video, did you mention the dimensions of the wooden post used, I'm curious as I'm thinking of using some 75x75 posts to build a screening frame around some unsightly down pipes an drain pipes, cheers, Rob

@Bacrenfencing 4 года назад

Hi Robert, I generally use 100mm x 50mm pressure treated timbers for this, but you can also secure 75 x 75 posts using this method, just use longer fixings, something like 8 x 150 bolts would do. Alternatively, you could drill a 30mm recess into the 75mm post and use 8 x 100mm fixings like I showed in the video. Hope this helps 👍

@robertburns8999 4 года назад

@@Bacrenfencing cheers mate, that's excellent 😀

@Bacrenfencing 4 года назад

@@robertburns8999 No problem Robert !

@mikehosking663 5 месяцев назад

Great vid. Can you clarify what type of drill bit you were describing at 8:21 in the video; the ones you said actually 'pull themselves into the concrete'?

@Bacrenfencing 5 месяцев назад

They are Heller Tri-Jet SDS drill bits, they are available on Ebay and come in many different sizes

@RaeNeil Год назад

Great vid mate. Anyone away to give this a bash, just take your time and think it out!

@Bacrenfencing Год назад

Thanks 👍

@bruceli161 3 года назад

hi, Thank for showing that, just wonder if the anchor would help a lot on this situation

@Bacrenfencing 3 года назад

Hi, Yes the anchor helps in this situation but you can use frame fixings or concrete screws which do the same job. I just find these Multi fix screws to be the best and strongest for this particular application. Thanks for the comment.

@bruceli161 3 года назад

@@Bacrenfencing Thank you for the reply! I also noticed that you were using a socket wrench rather than an impact driver. coz impact driver too strong?

@Bacrenfencing 3 года назад

@@bruceli161 Yes, I don't use an impact driver when using these concrete screws as it is easy to strip out the holes if not careful. Best to use a ratchet or spanner as you can get a better feel and not over tighten. Hope this helps

@bruceli161 3 года назад

@@Bacrenfencing Thank you so much! what an expert

@MattLawson91 Год назад

That was an informative video. Do you worry about water ingress into the roughcast through the drill holes at all?

@Bacrenfencing Год назад

Personally no I don't worry about that. If it really bothers you, then you could squirt a load of clear silicon in the hole before using the bolts, but I don't think you need to worry about that.

@matthewlawson735 Год назад

@@Bacrenfencing thanks for the advice

@Bacrenfencing 4 года назад

Thanks for watching and if you enjoyed the content, please LIKE, SHARE and consider SUBSCRIBING to my channel by clicking the link ru-vid.com/show-UC6IWF5LBPAqCwmjXcAGwWJw This would mean a lot to me and be greatly appreciated 😊

@Bacrenfencing 4 года назад

Please see my other fencing videos which a grouped together in this playlist ru-vid.com/group/PLfsJaPKE98IACFVHeKQpVGSHKBZap4zRU

@mytubebobbie06h 8 месяцев назад

Great video. I would have liked to see some form of caulking around the holes to avoid water penetrating through the holes and get tin behind the wall where it can lead to water damage.

@Bacrenfencing 8 месяцев назад

The holes are 100% sealed with the bolt threads, so no need for caulking. Thanks for the comment

@colinprince1633 2 года назад

Brilliant video as usual, very well explained. You need to look after your tools a bit better, that spade bit and spirit level look like you’ve just dug them out the ground😂.

@Bacrenfencing 2 года назад

Thanks Colin, aye some of my tools take a right battering ! 😂😎

@d.briggs5128 4 года назад

Great video. I've been wanting to use these bolts for while but wasn't sure about them. With the bolts being 100mm was the post you used 4" x 2" ?

@Bacrenfencing 4 года назад

Hi, Yes, the post used in the video was a 4"x2" and the bolts were 100mm long. The bolts come in a wide range of lengths and diameters, so it is really up to the user which size they use. Thanks for the comment 👍😎

@seamaster_007 2 года назад

How is this different than a 2x4? I'm in the US if it matters

@seamaster_007 2 года назад

Here in the US a wooden post is a 4x4

@davidllewelyn-evans3229 2 года назад

Hi there, great video, thanks for posting. Apologies if this question has already been asked but I scrolled through about 30 or so comments and couldn’t see it. I noticed the bottom of your wall has a slight lip, assuming for water run-off, would this not affect the level of the post going towards your fencing? If this was the case would it be a simple fix of making the post shorter at the bottom so as the lip would not affect levels?

@Bacrenfencing 2 года назад

If there is a large lip and I am hanging a gate for instance, I will always use a 4x4 post as opposed to a 4x2 timber. That way you can notch the posts to to fit over the lip on the wall - this enables you to plumb the post. In the case of running a fence off of it, it does not really need to be 100% plumb to the wall as it is just being used to attach fence rails, so yes you can make it shorter. I will make a video explaining this as I get asked this a lot. Thanks for the comment

@davidllewelyn-evans3229 2 года назад

Bacren Property & Fencing that makes sense, thanks for explaining

@Bacrenfencing 2 года назад

@@davidllewelyn-evans3229 No problem

@bikeyspice 4 года назад

Damn fine explanation

@Bacrenfencing 4 года назад

Thanks for the comment, I am glad the video helped explain how to do this 👍😎

@stig6134 8 месяцев назад

Excellent post.

@Bacrenfencing 8 месяцев назад

Thanks!

@FastEasyLifeTips 3 года назад

Handy thank you. I did a video on quickly drying your socks, it's funny the similarities in our accents. :D

@Bacrenfencing 3 года назад

Lol, cheers ! 👍

@1442GlennLane 3 года назад

Are you using 100mm x 100mm posts? Thanks, great video.

@Bacrenfencing 3 года назад

When attaching to a wall, I use 100mm x 50mm posts 90% of the time. Sometimes there are occasions where I will use 100 x 100 but it depends on the job really. Thanks for the comment 👍😃

@x4dd 3 года назад

Do you drill Same size masonry hole as the bolt size ie 8mm bolt use 8mm drill or do you drill smaller?

@Bacrenfencing 3 года назад

Yes, for an 8mm Timco multi fix screw, you need to use an 8mm Masonry drill bit. Thanks for the comment 👍

@marbleeye4569 3 года назад

Was the foot of the post contacting the ground or is the whole weight taken on the fixings? Any reason for not contacting the ground?

@Bacrenfencing 3 года назад

Hi, No the base of the post was not in contact with the ground. It is best to avoid contact with the ground wherever possible as this will help prevent wood rot. Hope this helps ? 👍

@jonathanlarter8711 2 года назад

Probably a silly question but if you remove the post later and untighten the bolts, can you easily rescrew it back onto the wall again with the same tightness as it was the first time? I’ve not used these types of bolts before with no raw plugs and can’t get my head around it. Thanks

@Bacrenfencing 2 года назад

Yes, you can remove these easily and then replace them again as they cut their own thread into the concrete. Thanks for the comment

@Trevorfoggia 2 года назад

Many thanks for making this tutorial. I have a concrete Lidget & Compton shed and need to run off a fence from it, do you think it will be the same principle as per your video? When I had it built at home the people that erected it told me to never to drill into it because the panels could get damaged so I’m a bit concerned. Greetings from Cumbria. Stay safe and well.

@Bacrenfencing 2 года назад

I think that should be fine, maybe drill a small test hole firs to see how the concrete reacts, but I think it should be fine. Thanks for the comment

@SprocketN 2 года назад

I was told the same thing, don’t drill the panels. I did try, the concrete is very, very hard. I ended up with a shallow dint and two blunt masonry bits 🙁 The other attempt I hit steel reinforcing, so gave up drilling. I wanted to secure some shelves inside, I fixed rails vertically from the roof frame to the floor (with a corner cut off to allow for the internal cementing at the bottom). Did you manage to secure your fence post?

@Trevorfoggia 2 года назад

@@SprocketN Good morning to you Sprocket; to be honest I gave up on the idea. These sheds are pretty crap in my view. Too many limitations on what you can do. I did try, wait for it, ‘No Nails’ on the inside to make a racking system = rubbish idea. I ended up buying some heavy duty plastic stacking shelves. Best thing ever. Easy to clean and move as well as holding some serious weight. Are you in the U.K. and if so which area?

@SprocketN 2 года назад

@@Trevorfoggia I like my concrete garage. It’s much better than the dilapidated wooden thing we had before and much cheaper than any alternative I could find, but you’re right they have their limitations. I used freestanding shelving too, from Screwfix, secured onto vertical rails to prevent tipping. (Shropshire).

@Rich-fr9xn 3 года назад

Hi,what size bolts did you use and how far into the brick work does the bolts have to go in.Thanks

@Bacrenfencing 3 года назад

The bolts are 8 x 100mm and they go in roughly 50mm. They come in many sizes, I have put links in the description. Thanks

@GlesgaNews 4 года назад

Hi Good video, Would those timco screws work on brick rather than the concrete.. GN

@Bacrenfencing 4 года назад

Hi Glesga News, Yes they work really well on brick and take a really good hold - best to use them in the actual brick and not the pointing for best results ! Thanks for the comment 👍😀

@GlesgaNews 4 года назад

@@Bacrenfencing Thanks ....Just watching your other vids...GN

@Bacrenfencing 4 года назад

Haha, you must be bored 😂✊👍 Cheers !

@archiemorris8123 2 года назад

Hello mate, I've had some trouble getting the bolts to take to the hole that's drilled, any tips? Cheers

@Bacrenfencing 2 года назад

This can sometimes happen if the blocks are quite soft etc. If this happens, I usually go up a size. In other words, if you have drilled holes for M8 bolts, then buy a few M10 bolts and use these in the same holes - that will usually work. Hope this helps

@lanceblack888 3 года назад

What fixings would you use for hard masonry like granite?

@Bacrenfencing 3 года назад

Hi, You would probably be best with smaller diameter fixing screws such as these - amzn.to/2DVMiw9 and use 7mm plugs. Obviously if using these, I would use more of them and position them at the sides of the timber as opposed to the centre if that makes sense. Also, make sure you use a good SDS drill for drilling in to granite as it would be extremely difficult if using a normal hammer action drill. Hope this helps a little ? Thanks for the comment ! 👍

@lanceblack888 3 года назад

Bacren Property thanks - I got some m14 masonry bolts with expansion plugs. Hopefully that’ll do it.

@6lr6ak6 3 месяца назад

Torx fixing bolts are great, just drill straight through the wood into the concrete with 6mm bit then impact driver um, use an 8mm washer.

@Bacrenfencing 2 месяца назад

Yes, I started using them about a year ago and don't use anything else now - they are fantastic. I must do a video on those - thanks for the comment !

@6lr6ak6 2 месяца назад

@@Bacrenfencing 👍

@C-Young. 10 месяцев назад

Thanks Shrek! 👍

@Bacrenfencing 10 месяцев назад

No problem 😜

@grahampriestley3105 3 года назад

Could you use the same method for fixing a post to a wall you are adding a fence on top of. I have a c.2-3ft brick wall surrounding my garden so wanting to add a 3ft panel to the top. Could I attach the bottom half of a 6ft post to the wall in the same way, with the panels then just attached to the top half of the post?

@Bacrenfencing 3 года назад

Yes, you can do that, if you look at my video here, that is what I done with this installation ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wdP8Cz2HaMA.html The only thing to bear in mind is if it is an exposed area, you would be best to connect all the posts with a backing rail to help tie it all together. Hope this helps ?

@grahampriestley3105 3 года назад

@@Bacrenfencing I'd just been watching that 😀. Rather than cutting lengths, no problem just fitting standard width panels to the posts, no? These are really helpful, thankyou. Makes it feel like if you get the right gear, you're halfway there

@Bacrenfencing 3 года назад

@@grahampriestley3105 No problem, yes, if you have the right tools and materials for the job, it is definitely easier ! Good luck with the installation and thanks for the comment !

@scottishjimmy9813 3 года назад

Would a 3/8" DRIVE ratchet with a 15mm socket work or would that not allow for enough torque? Thanks.

@Bacrenfencing 3 года назад

That would work fine, you don't need much torque, these fixings take a really good hold with minimal torque. Hope this helps

@scottishjimmy9813 3 года назад

@@Bacrenfencing thanks for your help

@thecount1001 3 года назад

is rain damage much of a concern, in Scotland?

@Bacrenfencing 3 года назад

Water / Rain is the enemy of any outdoor structure made of wood, so yes it is always a concern but we do what we can to protect against wood rot. Thanks for the comment.

@ozzieparky 3 года назад

Any problems with rot sitting the post onto the ground or should I be trying to get it off the floor so that it doesn't sit in the wet in winter? I guess if it's off the floor it won't be as strong...

@Bacrenfencing 3 года назад

It is best to leave the post a couple of inches above ground level to stop moisture getting wicked into the bottom of the post. If you use the fixings that I showed in the video it will be plenty strong enough even if off the ground. I hope this helps and thanks for the comment 👍

@ozzieparky 3 года назад

@@Bacrenfencing Thanks - really useful video

@Bacrenfencing 3 года назад

@@ozzieparky No problem !

@SharpeysWorld 3 года назад

hi, what would you suggest if the two walls im fixing posts to were not square? basically the walls either side start angling outwards

@Bacrenfencing 3 года назад

In that case, you have a choice depending on the angle. If you have the means, you can basically use thicker posts and cut them on the angle so that the face of the post will be square. In other words rip the post so it matches the angle. Another way is to use packers, so if your post needs to come out at the top for instance, you can pack it out until level. You can use plastic packers or make packers out of wood if you need to. I hope this helps ?

@SharpeysWorld 3 года назад

@@Bacrenfencing thanks for the suggestions. Dont think I'm confident enough to angle the post so packing it sounds easier

@Bacrenfencing 3 года назад

@@SharpeysWorld Yes, packing it out would be easier. I sometimes do that and then scribe a fence slat over the side of the post so that it covers the gap and looks neater. Best of luck with your install, I am sure you will be fine !