HOW TO FIT A FORTY WINKS KOMBI BED IN YOUR KOMBI (SWB and LWB Hints and tips)

Подписаться 80 тыс.

Просмотров 105 тыс.

50% 1

Step by step instructions showing you how to transform your vw T5/T6 kombi van, by fitting a bed platform from FORTY WINKS. All Forty Winks products are available to buy from our website.
We cover the method of fitting for the Short and Long wheel base versions.
TIME STAMPED PLAYLIST BELOW ⬇️
Thank you to Forty Winks for supplying beds for today's video and to Chris Bulmer for supplying the Long wheel base VW T5.
🏬 BUY THIS BED HERE: www.combevalle...
👕 BUY OUR MERCH HERE: www.combevalleycampers.co.uk/merch
▶️ HOW TO BUILD A CAMPER VAN PLAYLIST: • HOW TO PROFESSIONALLY ...
🔧 BUY THE TOOLS SEEN IN THIS VIDEO HERE: www.combevalleycampers.co.uk/tools
⭐ SUPPORT THE CHANNEL: / combevalleycampers
🕐 TIME STAMPS
0:00 HOW TO FIT A FORTY WINKS KOMBI BED IN YOUR KOMBI (SWB and LWB Hints and tips)
0:01 Intro (featuring Comedy Dan)
1:59 Product explanation and mounting in the vehicle
3:50 Parts explanation
7:27 The tools needed to fit the bed platform in your kombi.
8:20 How to fit a Short wheel base kombi bed platform
8:44 Remove the 4x anchor point bolts
9:42 Locate the wheel arch mounting points
11:10 SUBSCRIBE NOW and other ways to support the channel!
12:37 Mount the forward-most legs
13:31 Fit the front static frame
18:05 Fit the board to the static frame
22:09 Fit the rear folding section
26:26 SWB kombi bed overview
27:17 Kombi bed demonstration (including mattress!)
33:20 How to fit a Long wheel base kombi bed platform
33:41 LWB Kombi bed parts explanation
34:29 Remove the 4x anchor point bolts
35:24 Fit the static frame (Advise a 2 person carry!)
35:55 Remove the rear most anchor point bolts
36:59 Fit the front legs to the folding section
38:27 Fix the legs down with the thumb screws
38:50 LWB kombi bed overview and demonstration
41:25 Outro
Feel free to ask any questions down below and don't forget to give the video a thumbs up and subscribe to our channel!
Filming and Editing: Ali Jassim / just_jassim
BRAND NEW WEBSITE: www.combevalle...
FACEBOOK: / combevalleycampers
INSTAGRAM: / combe_valley_campers
@combe_valley_campers
Disclaimer:
Due to factors beyond the control of Combe Valley Campers Ltd, I cannot guarantee against improper use or unauthorized modifications of this information. Combe Valley Campers Ltd assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Combe Valley Campers Ltd recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Combe Valley Campers Ltd, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Combe Valley Campers.

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 89

@zanyzoo6767 3 года назад

OI, RU-vid, about a minute into this vid and an advert pops up. Yes you gottta pay the bills but youtube is fast becoming unwatchable with far to many ads.

@CombeValleyCampers 3 года назад

We are figuring out ways to get around this. Thank you for your patience ;)

@zanyzoo6767 3 года назад

@@CombeValleyCampers it's not your fault. It's unfair on RU-vidrs like you. Ads yes. They help fund the site. But they are getting to the point where some vid's I just leave because there are too many . Keep doing what doing . Thumps up to you.

@astragreen 2 года назад

I don't watch the AdsI mute them scroll up hiding the hole Ad then return I definitely won't watch or see any Ads on the tube!..

@whitewolfdj Год назад

Loving the videas, thanks. Quick question, would these fit a LWB panel van and other makes of van?

@colinlee5429 3 года назад

Brilliant video and brilliant product by the look of it! I had two cups of tea for this video ☕😁

@CombeValleyCampers 3 года назад

Thanks Colin

@richardsmith5249 3 года назад

When you're putting the Allen bolts in at the front, and not wanting to lose the washers into the frame, a little smear of grease between the washer and the bolt head will stick them in place.

@Paul_VanGo 3 года назад

Or super glue so they will come out, next time you remove the frame.

@anoshya 8 месяцев назад

I just put a huge memory foam mattress on top of ply base with sliding drawers underneath on my new VWT6. Very cheap but very functional as I only require three seats in the front. Also insulated the whole of the van.

@BarryCorbett-bs5ru 7 месяцев назад

Can you help with advice and how you did that to the Van thanks

@markdoudican461 2 года назад

This is exactly what I have been looking for. Perfect video to give me the confidence to fit it myself. One question though, do you know if a T6 single rear seat will fit into a T5. My single seat only tilts forward with no option to go flat. Thanks.

@kipa170 11 месяцев назад

Where would be the best place to buy spare bolts? I’ve just bought one of these beds from somebody and there’s no bolts that go in the wheel arch holes? Where would be best and what bolt details are they please?

@travelJunkie91710 3 года назад

i wish this was made for my 2018 Mercedes Metris passenger van - I would totally buy it

@Radio4ManLeics 3 года назад

God! This is sooo long winded.

@Paul_VanGo 3 года назад

Info: multi-spline bolts as in "tripple square" or, the official name, XZN. So you know what type of tool to get.

@dancad1288 3 года назад

Great video just set my fortywinks frame up thanks to your video looking forward to mattress arriving next week and giving it a go.

@endurperformance 3 года назад

But what if you need to use the van for work in the week?

@stephenwatkins2450 Год назад

Can you use this bed in a vw shuttle 10 plate?

@JKMediaCorp 3 года назад

Really wish the products you highlight were also available for the US spec. T4 (Eurovan MV).

@CombeValleyCampers 3 года назад

Hi John. And sorry!!! To be honest, there are plenty of things in the states I wish we could purchase here!

@jackgrimes-wl8fb 2 месяца назад

Excellent very detailed video. I guess that's the bed I want for my new (to me) VW T6 SWB Kombi. Thank you.

@peanut25john 3 года назад

Good video “ Where can you buy that kind of mattress please. Thanks 🙏 John.

@CombeValleyCampers 3 года назад

Hi John, you can purchase the mattress separately if you wish. Email us info@combevalleycampers.co.uk

@wbev_thai1666 3 года назад

That is awesome , I might be looking into this , thanks

@TheAndriuxxxa Год назад

Those legs must be folding

@daveb1242 4 месяца назад

I’ve just had this fitted along with the slide away system. It’s really good.

@johnwarner4513 2 года назад

It looks the dogs danglers, I'd buy one, but have two dogs, and cant work out the space needed

@madigan653 3 года назад

Hi. I'm planning to purchase a 2014 VW T5 Shuttle LWB next week would this bed suit? Thanks in advance. Billy

@graemejones3198 3 года назад

Do you sell the Kombi seat covers in the video and if not do you know where I can purchase these?

@CombeValleyCampers 3 года назад

I will find out for you

@mashlikethepotato 3 года назад

Can you get an answer for this please?

@wavenutter1920 2 года назад

Could you remove either the double or rear seat with the bed in place. I know they tilt forward before pulling up and wondered if there was enough space. I want mine set up with the bed permanently ( for boards not people) but the option of being able to put the seats in if needed.

@adiehull 3 года назад

Really cool set up 👍🏻

@jamesbailey4798 2 года назад

Great video. Does anything like this exist for a Transit Custom DCIV?

@danielbradley2448 3 года назад

I can't help but think a strap would be helpful with lifting and lowering the frame

@markyoung7271 7 месяцев назад

MDF.....yikes

@default5598 3 года назад

This is an epic bit of kit, love the video. As always really informative, just ordered one from 40winks 👍

@carplineout 3 года назад

Av got boxing over the wheel arch tho so do them make for that m8

@andrewlangridge8619 3 года назад

Nice video but I prefer my Amdro boot jump, well made, easy to fit and use.

@jpcrichton2280 2 года назад

Love the look of this, exactly the kind of thing I want for my bus. My issue, I have a LWB multivan with all the rear climate control/aircon gubbins. Obviously with the roof lining being a few inches lower, does anyone know if this will allow the rear bed panel to fold over? I’m not concerned about the legs as I can screw these in once I have it past the vertical position.

@CombeValleyCampers 2 года назад

Hi! We've looked into your enquiry with the manufacturer and need a bit more information to give a full answer. Can you please send you enquiry, with pictures of the van to info@combevalleycampers.co.uk Regards, Leigh

@chriscooperCRF300 3 года назад

Just thought I'd share this one. I have ordered my fourty winks bed system and I have just started to prepare the van for fitting removing the carpet from the wheel arch to find on my 2016 swb T6 there just hols with no threads what so ever, now what 🤷🏼‍♂️

@glenyscampbell Год назад

I have also have no threads on my rear mounting points , how did you resolve the problem?

@nevillebloodybartos 3 года назад

I’ve looked long and hard for one of these beds for a T4 Kombi.... can I find one? Can I ...... why do these companies only make stuff for t5 and t6 😭😭

@CombeValleyCampers 3 года назад

Hi! It's the largest market for parts. You local engineering shop should be happy to help with making a t4 version

@thetruth007 Год назад

Can you use it in a normal T5 LWB ?

@Neil-Aspinall 3 года назад

Cool but who on God's Earth could sleep on a mattress so thin unless you were just 40 kilo's?

@CombeValleyCampers 3 года назад

After lying on this high density foam I can assure you it is very comfy. However if you wanted the likes of an blow up mattress on top, that would be possible.

@jockharcourt9936 2 года назад

Can you get these in Australia

@richardlemarechal199 3 года назад

How much of the price so scene tax

@johncooper22 3 года назад

Whats the load limit on the bed please

@samanali3676 3 года назад

hey there do you have anything like that for a vw caddy swb thank you

@CombeValleyCampers 3 года назад

Can I recommend you look at www.vanfurniture .Co.uk as they have a fantastic range.

@basimmaan4549 3 года назад

The question is how match the cost

@RobertP7884 3 года назад

where can I get this net storage pockets visible on sides of van?

@CombeValleyCampers 3 года назад

Ebay or amazon

@ACIDvICTIM 3 года назад

What is the measurement in height between the horizontal box section frame and the factory fitted soft spongy floor please?

@CombeValleyCampers 3 года назад

The distance between the frame and the floor is 475mm. Hope that helps :)

@ACIDvICTIM 3 года назад

@@CombeValleyCampers Yes, and thank you for your swift reply! Glad you made this video and that there is now an option for a bed to fit a Kombi :) Typically the flightcase style box I just built to fit behind my rear seat bench to hold my gas bottle, stove, sink, BBQ and other cooking equipment is 51.5cm in height -I guess I could reduce that to 50cm by removing the rubber feet and or raise the bed boards by adding washers or spacers. Obviously this box would now be better placed underneath the fold up part of the bed at the rear of the van and be accessed via the tailgate. Just one other quick question though if I may... What are the benefits of re-registering a Kombi as a camper van with the DVLA? Does the vehicle excise duty (road tax) work out less expensive and is it generally cheaper to insure a Kombi as a camper rather than a private light goods vehicle? -I generally drive less than 5000 miles a year on average. Thank you for your time, much appreciated indeed!

@under2boots 2 года назад

This has given me the confidence to do this at the weekend ! Bits have arrived, will give it a go. Do you have a video how to do the headlining with the perimeter lights ?

@CombeValleyCampers 2 года назад

Not yet I'm afraid

@under2boots 2 года назад

Get your finger out ! I need this in my newish T6 🤣 Grateful for all the tips and help mate. Much appreciated

@johnnygreenshirt6215 2 года назад

Can you bring the van down and you guys fit it?

@CombeValleyCampers 2 года назад

Yes absolutely. Please email info@combevalleycampers.co.uk

@EliteSurvival Год назад

Ace video , sold

@sambrian3383 3 года назад

Yes, this is exactly the kind of thing I am after for my SWB T6! Is it fairly straight forward to take out again? Been after something semi permanent to use in the summer but also take out to regain the loading area in the winter. Thanks for the video!

@CombeValleyCampers 3 года назад

Yes, very easy to take back out. The boards can stay on top and after removing 4 bolts it can be taken out in one go.

@sambrian3383 3 года назад

@@CombeValleyCampers brilliant, thanks guys!

@CombeValleyCampers 3 года назад

@@sambrian3383 you are very welcome. Please head over to www.combevalleycampers.co.uk to make your purchase. Regards, Leigh and the team

@kyleardito 3 года назад

How do you make the single seat fold flat as mine only tilts forward. Thanks

@CombeValleyCampers 3 года назад

I am going to assume that this is an option on the single seat to fold flat. There is an option to purchase a bed frame that will take into account a seatbthat doesn't fold flat

@kyleardito 3 года назад

@@CombeValleyCampers I've since done some googling. T5 tip t6 fold.

@drewmce 3 года назад

Did you guys do the felting in this van?

@CombeValleyCampers 3 года назад

No we didn't, however we carry outbthis service to the same standard

@nick27j 3 года назад

Very good 👍

@kznjonno602 3 года назад

Can you ship to South Africa?

@CombeValleyCampers 3 года назад

Anything is possible my friend, and it helps that the bad and frame is normally shipped on a pallet any way. We are happy to get quotes or have you arrange a courier and collect from our distribution point

@Gem13 3 года назад

X1.5

@robbiekerr463 3 года назад

How do I convert my kombi Single rear seat to fold flat? It’s 2014 model

@Neil-Aspinall 3 года назад

By buying either a vw T5/T6 kombi van

@kyleardito 3 года назад

Hi, I would also like to know this as the ones I have seen only tilt forward.

@CombeValleyCampers 3 года назад

I beleive that a folding single seat is an optional extra when ordering. However, there is a model of fortywinks bed that accounts for a single seat that doesn't fold flat

@robbiekerr463 3 года назад

@@Neil-Aspinall haha, funny but obviously I've already got a t5.1 kombi, the seat tilts forwards, it doesn't fold flat, I assume its the newer models that do this. I wondered if there's a way of converting the seat ive got ?