HOW TO FIT KING COMMON RAFTERS AND HIPS (PART TWO)

Подписаться 96 тыс.

Просмотров 23 тыс.

50% 1

We're proud to be sponsored by James Hardie, the global leaders in manufacturing fibre cement products. Be sure to check out their exciting range of products here: bit.ly/3kpdtRd
In this second episode of HOW TO FIT KING COMMON RAFTERS AND HIPS, Tony, Pete and Dan Cox with his ultimate roofing square give you roofing tips and tricks whilst explaining the process of hip rafter cuts.Dan demonstrates how to use a roofing square to measure up for a birdsmouth cut and a plumb cut on the hip rafter.Tony talks through the hip rafter length and the guys finally show you how to throw hip rafters perfectly into place.Tony gives a quick recap of the who;e process from setting out and cutting common rafters, fitting a ridge board which is then held in place by the king common rafters and then as you have just seen installing hip rafters. We hope you enjoyed this roofing masterclass and it gives you an insight into how frame a hip roof.
Tools Used :
Ultimate roofing square : www.essential-...
PLEASE NOTE: we’ll endeavour to answer questions and comments as soon as possible depending on our work schedules.
_________________________________
For all our socials! ▶linktr.ee/buil...
Music from Epidemic Sound and the RU-vid Audio Library
_________________________________
#Construction #Roofing #Rafters

Опубликовано:

16 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 61

@thetallcarpenter 3 года назад

Love it!!. Possibly the best part of hand cutting a roof is dropping in the hip and seeing how lovely it lines in with the rest of all the rafters.😍 Cheers for the video fellas.👍

@Ultimate-roofing-square. 3 года назад

Thanks Del. It sure is satisfying dropping hips in and it all lines up just right. 👊🏻. Have a good one! 🙏

@thetallcarpenter 3 года назад

@@Ultimate-roofing-square. The roof looks sweet so far mate.😎

@BuildWithAE 3 года назад

Hi Del so true there is something very satisfying about dropping hips in hope you are well your RU-vid channel is going great guns all the best Tony 👍

@thetallcarpenter 3 года назад

@@BuildWithAE Cheers Tony.🤩

@TheNorthernmunky 3 года назад

Master craftsmen on this channel, absolutely superb standards.

@isabelmariavalades1407 3 года назад

Fantastic video it all fits like a glove you’re all the kings of measuring stay safe 👍👍👌👌😊

@jnielson07 2 года назад

I’ve been cutting roofs for years yet I still watch your videos just for enjoyment haha.

@minicooper2572 3 года назад

Great explanation as usual keep it up 🤜🏽🤛🏽👊🏽

@coggsy3036 3 года назад

How many of you guys know that If you was going to do this back in the olden days,you would keep the point of the hip plumb cut right up to the ridge line and back the both edges of the hip rafter off,this is known as the dihedral angle so the middle of the hip rafter would plane through with the top edge of the commons and jack rafters,I wonder how many of us remember this from our college days,robin clevett would I’m sure. Great vids guys keep them coming

@BuildWithAE 3 года назад

Hi coggsy3036 I remember the dihedral very well it’s something that will be shown in a big roof coming up later also 3” hips would always do dihedral angles, but most of the time 2” we don’t do the angle all the best Tony 👍

@coggsy3036 3 года назад

@@BuildWithAE yes same here,I like to keep it old school as much as possible Keep up the good work guys💪👍

@Ultimate-roofing-square. 3 года назад

@@coggsy3036 hi, yes I’ve done a few dihedral angles on hips, even filmed one.. Got a well done from a NHBC inspector on one job for good practice, that’s a first.. thanks for watching.

@TheToolnut 3 года назад

Bevelling the tops of the hips gives one more meat to nail the battens into. The same applies if one is sheathing the roof with ply/Osb.

@BuildWithAE 3 года назад

@@TheToolnut great shout especially with OSB or ply all the best Tony 👍

@amazing451 3 года назад

Nice to seen 2 masters of their trade back on the roof again. Is there a part 3 to this where we see the finished product?👍👍👍

@Ultimate-roofing-square. 3 года назад

Watch this space...

@amazing451 3 года назад

@@Ultimate-roofing-square. I'll be looking forward to seeing you on whatever forum skillbuilder or AE. Your a true legend !👍👍👍👍

@Ultimate-roofing-square. 3 года назад

@@amazing451 Thanks Kevin, and for your continued support. 🙏

@brickrightbuildinglandscaping 3 года назад

The A team you and Dan you done such a good job with them hips id let you fix my shoulder 🤣. No such a good job lads a great accuracy as usual brilliant. Justin brickright 👍🧱

@BuildWithAE 3 года назад

Hi Justin, 😂 Hope you Guy’s are well, I know what you mean it’s my knees for me. I see the channel is coming on nicely, have an awesome week Bud all the best Tony 👍

@Ultimate-roofing-square. 3 года назад

Hi Justin, hips are ok but I’m no good with Shoulders... Thanks for watching. 👊🏻

@brickrightbuildinglandscaping 3 года назад

Getting bloody old Dan i am mate 🤣🤣 great videos you and tony mate 👍

@Ultimate-roofing-square. 3 года назад

@@brickrightbuildinglandscaping think we are all feeling it now.. many thanks. 🙏

@brickrightbuildinglandscaping 3 года назад

@@Ultimate-roofing-square. Mind says yes body says hang on a minute 🤣🤣 take it easy dan mate 👍🤣

@SteveAndAlexBuild 3 года назад

Beautiful job making it look so easy as ever , thanks chaps 🧱👍🏼

@BuildWithAE 3 года назад

Hi guys much appreciated sorry haven’t been around much life is a bit crazy wife’s eye op coming up all the best Tony 👍

@SteveAndAlexBuild 3 года назад

@@BuildWithAE . Wish her good luck from us Tony 🤞🏼😁🧱👍🏽

@BuildWithAE 3 года назад

@@SteveAndAlexBuild much appreciated Guys 👍

@SteveAndAlexBuild 3 года назад

@@BuildWithAE 😊

@chrisaristeidou1407 3 года назад

Great job boys. Where am I going to find the Hip plumb cut list it shows at 1:21. Thanks.

@Ultimate-roofing-square. 3 года назад

Hi Chris, sorry just seen your message. You can get it from the website, download it. If not drop me a email via the website. essential Carpenter Tools. Thanks.

@dougsaunders8109 3 года назад

Remember chaps you are not building a piano. But judging from finish you could be. Lovely job. Nice to see Dan on your channel having seen him on the ‘other side’

@Ultimate-roofing-square. 3 года назад

Well it’s sort of like a piano... I’ve been lucky filming with a few great people.. Thanks for watching.

@BuildWithAE 3 года назад

Hi Doug much appreciated it was a pleasure and dream to work with Dan he is an incredibly nice Guy and craftsman all the best Tony 👍

@Ultimate-roofing-square. 3 года назад

@@BuildWithAE thank you Tony, same here it was a great pleasure to work and film with you. 🙏 Do it again soon. 👊🏻

@davharv 3 года назад

Loving the video but noticed you were not using nails. Wondering what type of screws you were using?

@zephyr1408 Год назад

The English crack me up ! As a pro carpenter I figured out in the 1 st day on the job I need a tool belt! A good tool belt and wear it correctly not all the weight on one side and thoughtfully put together! You guys do great work considering all the “ where’s my” , “hv you seen” , “ do you know where” and thousands of others! For a couple hondos your in a great belt? I do enjoy seeing all those tools hanging off your pants or digging stuff outta those tiny little cloth pockets !

@navik1585 3 года назад

What are you calling that square .. its very nice

@pepx3625 3 года назад

perfect timing as I am just cutting the roof of my self build having already purchased the ultimate roofing square. Commons, king commons and ridges in place and all fit perfectly after cutting using the square. This is a great tool and makes things very easy. Now for the hips, wish me luck 👍

@Ultimate-roofing-square. 3 года назад

Thanks for buying a square. You don’t need luck, the hips will fall into place like a dream., All the best. 👊🏻

@BuildWithAE 3 года назад

Hi Pep X Dan’s roofing square does make life so much easier you will do a awesome job on them hips all the best Tony 👍

@justjacqueline2004 3 года назад

Detailed craftsmanship indeed.

@flyingjackcarpentry9394 2 года назад

Recently did my 1st hipped roof. I did it solo which was stupid. 3 hips and 3 valleys. Bit ambitious for my first time, especially as I was having to marry into the original with Rosemary's, valley tiles and hip bonnets. Not 1000% happy with it. The plates weren't super square. I knocked them about abit and 345ed the corners until I got it where I was reasonably happy but something was wrong. It was hard doing it alone. Couldn't measure from corner to corner properly. It was parallel but not square and I don't know how. I cut the Kings the same, a few commons and the hips the same. Everything seemed to be working perfectly. But cutting the hip Jack's in pairs made me realise something was off. But it was only a few mm so I carried on, coz I had to get it done. I struggled with the valleys. Especially the connecting valleys. The angle up the valley boards wasn't working. So I started to panic that I had gotten the pitch wrong. I climbed into the attic and checked about 10x rafters and they were all 41degrees there abouts. So I couldn't understand what wasn't working.

@BuildWithAE 2 года назад

Hi Kallum I think we have all been there at different times of are life’s. Dan square is a cracking bit of kit but the building careers live on the 16 17 July u can talk to people and have a go with us so please come along all the best Tony 👍

@flyingjackcarpentry9394 2 года назад

@@BuildWithAE a big part of me is resisting buying Dan's square. Makes it seem too easy. I wanna know I understand it all 1st. I think I do, but doing this hipped roof has knocked me about abit. I kept the pitch then same, I kept the hips and valleys as 45 as possible. I cut the Jack's in pairs which I imagined would keep everything at least within 45. I even added a dragon brace detail using the offcuts from the hip birdsmouth. But something hasn't worked 100% and its driving me mad. Am I being too fussy? I reckon I might come to your thing