How to fix a Frameless Sliding Shower Enclosure by the Exceptional Glass Company 

Exceptionalglassllc.com

It worked! Our bathroom sliding glass door made awful streaking noise each time we close it. Following your instruction, I re-adjusted the Allen Key holes and put some lubricant to the rail. No more streaking noise! Thank you so much. Subscribed and gave a thumb up!

Thank you. This was so easy to understand, very clear instructions. I feel like I can actually do this.

I have the same shower door but a different issue my won’t stay closed could yall make a video on it

Thank you for sharing this video.

it did work!! I had my husband watch your video. I can't remember what brand of door we have, but the little holes you have on the front of the rollers at 2:03 aren't present on our door, so it was really difficult to get the rollers to twist. but somehow my husband used an old tiny drill bit that he didn't mind destroying for leverage and put it in the holes that I think you're calling "Allen key holes". I still hate the door we chose. It is impossible to get the glass clean in the area where the doors come together which annoys me. In the next house im going to get a hinged door and that's that. Lol 😂. Thank you so much for this video!

thank you!

You are a lifesaver.

After watching your video and being hopeful this would work I didn’t have much luck. Since these doors are a pain to clean the area where they overlap, and having no luck with the adjustments, I removed the sliding door, cleaned the track, the rollers and of course the doors. After installing the top rollers I hung it back on the track, installed the bottom rollers and voila, it worked. I should’ve taken a picture of the positions of the height adjustment/indicators on each roller but figured I was good to go and didn’t. Now three weeks later it is sticking again, and again my adjustments aren’t making a difference. The track bar is not perfectly level over the opening section but seems to be over the fixed panel. I don’t think this is the problem because it worked fine after the original installation and then again after this recent removal and re-install. This shower is in my home of one which puts the shower to use once a day at the most. I certainly don’t want to have to keep removing and re-installing this piece of glass but I’m kinda at a loss. Any advice or suggestions would be welcomed!

Thank you, how do I replace the sweep on this type of door: do you have a video for that.

Super helpful! What if door height is maxed out (Allen key hole on upper roller is facing down toward the floor) and still drags along the bottom guide? Thanks!

Hi! I have a quick question… my doors are very similar to these, and they’re only about a year and a half old, but lately the door has been sliding back by itself… any idea how I can fix this issue?

How do you secure the bottom guide to the stationary glass door? There is a screw but there is no hole through the glass and it's not screwed into the tile?? Thanks

I hope you can help me. I have same type door. What can I use to seal the bottom of the rolling door so water doesn't end I on my floor.

Wow I have a door that looks just like this one and stops short of closing about 2 inches away from the wall. I was originally thinking I needed to get a new shower door and have been silently cursing purchasing this one for $600 something 5 years ago 😂😂 I'm going to see if my husband can try this. If that doesn't work then we'll replace it. I'm so over this bathroom. It's cursed. First had a shower leak. Then fixed that and the damn door hasn't closed ever since.

my problem is that the door moves freely in both directions but somehow it is tilted and comes back always to the open position on its own. Will this fix this too? Thanks.

Hey how do I fix the same door that is higher on one side and it’s almost as of the wall is not level? It’s scraping the bottom of the tub

I have the same shower door. But mines won’t stay all the way closed, do I have to adjust those rollers with a Allan wrench

Excellent. Super thanx! You have my sub

one of my sliding doors doesn't keep closed when one takes a shower. It slightly opens and it is a real inconvenience. Does it need to be tightened?

Would you adjust both of the top ones?

Is the hex key metric or SAE?

Hool saiz plz cunfarm