In this video. I will show you how to hook up and fix your headlight on a 2005 49cc GY6 wildfire moped/scooter. This is a very common problem for the Wildfire scooters. If you like these kind of videos be sure to subscribe.
Having a strange time right now. Popped in a plug and play LED headlight and now my stock regular bulb style flashers stopped working. Any thoughts when you have a moment? 49cc Taotao Pony 50. Winpower plug and play LED headlight.
I’m having the same issue with my GY6 150cc bike I put brand new parts in my engine cause it seized up now my headlights don’t work and the speedometer light but my signals work and break light only when I hit the breaks. Can u show me which one do I properly put the wiring
Thank you four your great video I have a Peugeot V -Clic 50cc my Headlight bulb is low-Hi the Low is blowing all the time also the rear tailgate blowing to is just working when I break and the Hi been working to any advice thank you very much
I figured out a better way. Cuz the wiring on these suck LOL. If you run a wire from the positive from the battery to the switch in the brake handle and then run that wire to your tail light and make sure it's grounded as well that's how you create the brake light. As a running light I hope it straight to the battery with a switch and that switch also will hook straight up to your headlight I just completely bypass the harness and make my own essentially. You have any other questions just ask
Hi how you doing I got a 50cc TaoTao scooter will you send me the directions how you did that how you Rampage straight wire and connected it with the switch cuz I always having problems with my headlight on my 50cc TaoTao scooter
Salve sono un italiano e posseggo una Yamaha Majestic 125 e non mi funzionano gli anabbaglianti tutto l'altro resto delle luci fanno ho provato tanti rimedi ma niente da fare secondo te che problema ci sarà e come posso risolvere.. Grazie mille
Replaced my highbeam light..worked fine until I reved it and it blew out..looks like previous owner had probs with it since there are melted wires from the original setup
The only thing I hate about mopeds are cheap wiring harnesses. I ran into so many electrical problems. I finally started building them from scratch. It takes time but it's worth it
@@EpicvideoPro Hi, have you made the video you outlined in your comment "You can also run your headlight to a switch and straight to the battery"? I would like to watch it to learn how to do this.
