The BEST Way To Fine Tune Idle Mixture Screws For Your Carburetor

Carb leaking fuel? Here's how to diagnose the problem...#1825

Новая БУХАНКА 2024. Всё готово. Буквально ВСЁ

Что случилось с ШАПОМ? Первый запуск утопленного пикапа!

CLANCY 🦞 Operation Squid Ink (New Brawler Animation)

would you eat this? #shorts

How to Fix a Leaking Carburetor

Eliminator Performance

Подписаться 100 тыс.

Просмотров 45 тыс.

50% 1

Видео Поделиться Скачать Добавить в

Step by Step!
Have a leaking carburetor? Did you clean and rebuild the carb, even go as far as replacing the rubber tipped needle valve, and the carb still leaks?
Today I'll show you how to solve this issue by using an electric drill, a q-tip, and some Permatex valve lapping compound!
In this video, I'll be using the STENS 705-020 Carburetor Pressure Gauge: www.amazon.ca/Stens-705-020-C...
You'll see the results at the end of the video!
_______________________________________________
If you enjoyed the video, hit LIKE & SUBSCRIBE!
New videos every week!
SOCIAL MEDIA:
Instagram: ELMN80R
/ eliminatorperformance
/ elmn80r
/ eliminatorperformance
DONATE:
paypal.me/ELMN80R
Bitcoin: 1NYgPvcvBWuhGRewsLE4Scy1cbzwndh5hZ
2ND CHANNEL:
EP Vlogs: / @eliminatorperformance...
GEAR:
Camera: amzn.to/2HVkW9o
Tripod: amzn.to/2HGWt4w
Microphone: amzn.to/2J7k9DA
Cheap Mic: amzn.to/2xCBn6z
Headphones: amzn.to/2JeHUG9
Editing Software: amzn.to/2JD7OTx
Photoshop: amzn.to/2HBY6Ez
MUSIC:
Intro/Outro Music: Burnt - Jingle Punks

Опубликовано:

5 дек 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 93

@DonaldMang 25 дней назад

I am a novice at working on small engines, I took it up as a hobby this past year being retired. I've been getting a lot of machines on stuff for free websites. As I always have I save parts. Which brings me to Having saved a lot of needle valves, now I can try a saved one to see if it works. As always GREAT video.

@REVNUMANEWBERN 3 года назад

GREAT idea mate ! As usual detailed clip with easy to follow directions, NO nonsence just pure talent !

@EliminatorPerformance 3 года назад

Thanks for watching!

@ruannaude8197 Год назад

That was the solution to many of my issues on different engines. Excellent video

@blomtho 11 месяцев назад

This fixed my issue that has been bothering me for a couple of weeks! I even have a new (cheap) carb on order. Used Autosol and a cotton stick just as shown in the video. Thanks! 🙏

@bc3413 2 месяца назад

Awesome video and great filming and explanations. Huge help for my carb dude

@dfields9511 3 года назад

Excellent, I never thought to use lapping compound on a brass seat. Makes logically sense, often times I just put carb cleaner on q-tip and put in drill.

@EliminatorPerformance 3 года назад

Thanks for watching!

@kjell-richardlvdal373 3 года назад

Great video, straight to the point. No loose teeth like Tyral fixes all

@EliminatorPerformance 3 года назад

Just a chipped tooth that I'm not paying to have fixed again haha thanks for watching!

@jibnerjuarez4288 5 месяцев назад

I want to thank you i had this issue with my gt5000 And now it runs perfectly!

@803mastiff9 8 месяцев назад

Thumbs up for valve lapping compound. I had polished it with metal polish and was going to try rouge before I saw this simple solution. Thanks

@EliminatorPerformance 8 месяцев назад

It works good just go slow with it obviously, once you take too much out you can't go back lol good luck!

@thulanikhumalo7604 3 года назад

I like this channel...so educative, from South Africa.

@EliminatorPerformance 3 года назад

Thanks for watching!

@9921moo Год назад

thanks...very informative.....thumbs up buddy !!!

@jaimeramirez4664 11 месяцев назад

Good job.. I will follow your advice.. Jaime from Bogota Colombia...

@brucel.6078 3 года назад

Great info!! Thanks man!

@EliminatorPerformance 3 года назад

Thanks for watching!

@minouchat 3 года назад

Verry Good tip! Thanks!

@EliminatorPerformance 3 года назад

Thanks for watching!

@watermanone7567 3 года назад

Good job. Toothpaste or Brasso also works good, may take slightly longer.

@EliminatorPerformance 3 года назад

Thanks for watching!

@FrancoTheBoss3434 3 года назад

Great video 👍🏻

@EliminatorPerformance 3 года назад

Thanks for watching!

@donvoll2580 3 года назад

good day Interesting video. Never ever thought about that. Thanks

@EliminatorPerformance 3 года назад

Thanks for watching!

@tonym6920 3 года назад

Great idea, thanks! 👍👍

@EliminatorPerformance 3 года назад

Thanks for watching!

@warrenmohler31 3 года назад

I have been using Q tips and compound to do this to outboard carbs for years Ajax scouring powder also works

@EliminatorPerformance 3 года назад

Thanks for the suggestion, and thanks for watching!

@malikrameez703 3 года назад

That is so amazing helpful video bro

@EliminatorPerformance 3 года назад

Thanks for watching!

@henrymurawskibigdogrepair 3 года назад

Good vid keep up the good work

@EliminatorPerformance 3 года назад

Thanks for watching!

@BrucesShop 3 года назад

I think we all have a donar tank. LOL I have tried Brasso cleaner to some success. It isn't quite abrasive enough. Great video, I am commenting as I go. Lapping compound has worked better for me than brass cleaner. I switched about a year ago. There it is at 5:31 !!!!!! Nice work

@EliminatorPerformance 3 года назад

Yea I've found it to work best, thanks for watching!

@ACKCSC2024 3 года назад

Great video thanks

@EliminatorPerformance 3 года назад

Thanks for watching!

@EscribanoEl 10 месяцев назад

OK, I found the answer. The pin on top of the needle valve was SO firmly stuck that I thought it might have to be unscrewed or something!!!! ))))) Guess I just found the problem. Thanks again Eliminator!

@EliminatorPerformance 10 месяцев назад

I have a video on that too! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TD3egFO1ytU.html

@jerrysoutherland662 3 года назад

Brasso polishing compound will work.Nice video.

@EliminatorPerformance 3 года назад

Thanks for watching!

@normanbalajadia6126 3 месяца назад

The best ever❤️

@EscribanoEl 10 месяцев назад

Thanks. Great video. I have what looks like almost exactly the same carburettor and obviously you just slip the pin out that acts as a hinge, but then there's another pin (like yours) that prevents me from taking the float off. I don't want to damage anything, and I can't figure out how to proceed to remove the float and reveal the needle valve and seat. I'm going to see if I can find the answer on another vid, but if you see this and could let me know, I would really appreciate it. Cheers!

@jasons4622 Год назад

This just saved me $30. Awesome

@garny3766 3 года назад

This is a good tip with viton tip needles but older brass ones not so much. My arsenal of tools are drill bits ground flat, end mill bits, and dremel polishing bits cut at 45*. I basically go at it like cutting a new intake/exh. valve seat😆 these cheap ope carbs are not as rare and as expensive as keihins on Atv’s and bikes.

@EliminatorPerformance 3 года назад

Thanks for sharing!

@romeparrilla8307 2 месяца назад

thank for the video,what if mine gets clogged from not using the bike for a while,,can i just spray carburator cleaner to the hose and blow it with compressor,will the needle valve be ok?thanks again.

@thecaptainindustrialsales4560 Месяц назад

is the bore ( needle seat bore for the new neoprene gasket ( biscuit) in the carb for the needle seat , straight bore or tapered? can you measure it , and confirm?

@raccoon874 3 года назад

*may try this...*

@nickl1682 3 года назад

good info . You have a clean and organized shop . Need to cut down on the adds ..

@EliminatorPerformance 3 года назад

Unfortunately RU-vid is in charge of ad placement, wherever you see a yellow mark on the timeline is when one can play, but they don't always play. Glad you enjoyed the video, thanks for watching!

@waynestefinashen239 3 года назад

Another good one buddy, for your viewers that may not have access to lapping compound do you think toothpaste or possibly baking soda or powder mixed with oil might work?

@EliminatorPerformance 3 года назад

Not too sure, have never tried that! Thanks for watching!

@alext8828 3 года назад

Toothpaste is what I was thinking too. It is very slightly abrasive. I think it would be worth a try. I have some Mag polish in the closet. I think it's Mothers. That's always a good go-to polish for odd jobs. Even on paint and Plexi.

@Splitting-Firewood89 Год назад

This is just a new Carburetor you might need to know most might have a little seal in it!

@billkrause4585 3 года назад

Don't you have to apply a little pressure to the float as simulating the fuel level pushing up on the float? Good tip. Thanks!

@EliminatorPerformance 3 года назад

No, generally the weight of the float is enough to let you know you have a seal or not under 5psi, sometimes I even test them around 2.5psi and it's good enough to tell me there's a good seal and the carb won't leak. Thanks for watching!

@allanlopez9840 Год назад

Is it possible all of my gas to leak due to a float problem except for the reserve?

@mlab123 10 месяцев назад

Do you think another mildly gritty compound like, say, toothpaste, would have the same effect? Just trying to think if there are other compounds that might accomplish the same thing.

@EliminatorPerformance 10 месяцев назад

Yes, I've used some stainless steel polish and it seems to work fine, like I said with the valve lap compound I'm not putting a lot of pressure, just enough to let the grit clean up the surface. I'm sure some brass polish would work fine

@dougvalkema4762 3 года назад

Would rubbing compound work if You don't have lapping compound?

@EliminatorPerformance 3 года назад

I'm not sure as I haven't tried it, basically anything that's course would work.

@victoryfirst2878 2 года назад

How expensive is the Stens pressure tester Mr. Eliminator ?? Would using brass polish paste work also ??? Nice video fella.

@EliminatorPerformance Год назад

It's quite expensive, but they work well. I'm sure you can make one using some household tools.

@danyube4450 Год назад

How about rubbing compound?

@patriciabush5686 10 месяцев назад

My problem is my carburetor needle seat doesn’t have a round head to slip in carb bowl. It has nothing to attach to. Please help

@Pete.Ty1 3 года назад

😊👍

@EliminatorPerformance 3 года назад

Thanks for watching!

@charlesjohnston9067 Месяц назад

What would cause fuel to flow out of an overflow hose???

@EliminatorPerformance Месяц назад

Leaking needle valve

@Papi4l2 Год назад

I used metal polishing compound. The liquid kind

@EliminatorPerformance Год назад

Yes I use that now, works excellent

@mikemerritt9923 3 года назад

if that compound marks the value ,just think what it doing to the seat

@EliminatorPerformance Год назад

Yea it's what I had at the time, haven't had an issue with any, which is why I mentioned not a lot of pressure. I'm now using brass polish, but it needs to be cleaned even better.

@gilpicard6024 3 года назад

Just assemble turn upright - bowl down and blow shouldn't get leakage.

@gilpicard6024 3 года назад

Sorry blow in when upside down.

@Mike-su8si Год назад

Id just use gas on it or keep it dry not gonna ruin mine drilling it with a bit cause i probably would still think it needs a fatter rubber tip needle

@EliminatorPerformance Год назад

You don't drill it, you're just spinning the drill with your fingers and minimal pressure to debur the center hole in the seat. Polishing them is the best way, but sometimes they need to have the drill technique done. It's usually the only way you can solve a slow leak after replacing the needle valve

@Mike-su8si Год назад

@@EliminatorPerformance but then the bur inside the side of the hole would need picked out i have the tools for that

@chuckmcmullen9968 2 года назад

I have used baking soda type toothpaste as valve lapping compound. Flushing with carb cleaner of course. I also use electronic cleaning swabs, they are smaller in diameter and use a felt tip instead of cotton. I have cleaned the electronic cleaning swabs and reused.

@EliminatorPerformance 2 года назад

Yes anything that's gritty and polishes will work. I'm going to try toothpaste, as many have suggested it. So far, I haven't had one fail once it's been polished with the valve lap compound. But as others mentioned, you have to be careful as it's meant to be used on hardened steel and not brass.

@ripptydevibes2581 9 месяцев назад

For those wondering YES Toothpaste will work

@ripptydevibes2581 9 месяцев назад

Thanks alot for this video man. I was scratching my head thinking "man, i wonder if i should apply lapping paste onto the needle and rotate it back and forth" Then I got on here and found your video LOL! This Q-tip paste tech is everything I needed to complete my bag of carb tricks!

@davidlang576 3 года назад

? for you, and I am sure that you have no f%#k^9G clue! Would tooth paste work as well? What are your thoughts?

@EliminatorPerformance 3 года назад

Absolutely no idea, would probably take longer and you'd need something gritty. Thanks for watching!

@richardtemby4358 3 года назад

Toothpaste is much less aggressive. Just sayin!!!

@EliminatorPerformance 3 года назад

May take a lot longer, depends on the toothpaste lol thanks for watching!

@andrewdickson9964 Год назад

Just tried this 🤞 on a little jap quad hope it works these little cheap quads are doing my head in 😢

Далее

The BEST Way To Fine Tune Idle Mixture Screws For Your Carburetor

15:16

The BEST Way To Fine Tune Idle Mixture Screws For Your Carburetor

Просмотров 1,4 млн

Carb leaking fuel? Here's how to diagnose the problem...#1825

57:08

Carb leaking fuel? Here's how to diagnose the problem...#1825

Просмотров 499 тыс.

Новая БУХАНКА 2024. Всё готово. Буквально ВСЁ

1:20:00

Новая БУХАНКА 2024. Всё готово. Буквально ВСЁ

Просмотров 258 тыс.

Что случилось с ШАПОМ? Первый запуск утопленного пикапа!

42:09

Что случилось с ШАПОМ? Первый запуск утопленного пикапа!

Просмотров 499 тыс.

CLANCY 🦞 Operation Squid Ink (New Brawler Animation)

00:58

CLANCY 🦞 Operation Squid Ink (New Brawler Animation)

Просмотров 1,1 млн

would you eat this? #shorts

00:36

would you eat this? #shorts

Просмотров 2,2 млн

How-To fix a leaking Briggs carburetor: the complete guide

7:22

How-To fix a leaking Briggs carburetor: the complete guide

Просмотров 519 тыс.

Top 5 Most Common Carburetor Problems & How To Fix Them

6:05

Top 5 Most Common Carburetor Problems & How To Fix Them

Просмотров 103 тыс.

How to repair a leaking carburetor float bowl. The spot you might not know about!

5:29

How to repair a leaking carburetor float bowl. The spot you might not know about!

Просмотров 756 тыс.

How does a Carburetor Work?

23:59

How does a Carburetor Work?

Просмотров 688 тыс.

How To Fix A Briggs Or Tecumseh Lawn Mower That Leaks Gas From The Carburetor

10:29

How To Fix A Briggs Or Tecumseh Lawn Mower That Leaks Gas From The Carburetor

Просмотров 189 тыс.

Common Problems With Small Engine Carburetors (Float Type)

3:51

Common Problems With Small Engine Carburetors (Float Type)

Просмотров 213 тыс.

Leaking Carburetor! Not the Usual Cause

40:46

Leaking Carburetor! Not the Usual Cause

Просмотров 76 тыс.

HOW TO FIX A LEAKING CARBURETOR

4:50

HOW TO FIX A LEAKING CARBURETOR

Просмотров 595 тыс.

Needle Valve and Seat Replacement Gas coming out of overflow in carburetor

2:37

Needle Valve and Seat Replacement Gas coming out of overflow in carburetor

Просмотров 18 тыс.

Carburetor Cleaning

5:05

Carburetor Cleaning

Просмотров 315 тыс.

Щас полетят Лайки от Мужиков💪 #shorts #компот #прикол #топ

0:14

Щас полетят Лайки от Мужиков💪 #shorts #компот #прикол #топ

Просмотров 6 млн

СЕРЕГА ЕЛЫ ПАЛЫ СКОНЧАЛСЯ!!!

0:59

СЕРЕГА ЕЛЫ ПАЛЫ СКОНЧАЛСЯ!!!

Просмотров 3,3 млн

Разница между здоровыми и деструктивными отношениями:

0:20

Разница между здоровыми и деструктивными отношениями:

Просмотров 3,3 млн

Когда вода попадает в нос при плавании

0:35

Когда вода попадает в нос при плавании

Просмотров 4 млн

ОБМЕНЯЛ СКРЕПКУ НА ЛЮКСОВЫЙ АВТО! ЛИТВИН, ТАМАЕВ, СУБО, СТИЛ!

1:38:25

ОБМЕНЯЛ СКРЕПКУ НА ЛЮКСОВЫЙ АВТО! ЛИТВИН, ТАМАЕВ, СУБО, СТИЛ!

Просмотров 3,1 млн

ТАТУ пришлось ПЕРЕКРАСИТЬ

0:20

ТАТУ пришлось ПЕРЕКРАСИТЬ

Просмотров 3,7 млн

Когда НИКА пришла к бабушке!

0:21

Когда НИКА пришла к бабушке!

Просмотров 8 млн