How-To fix a leaking Briggs carburetor: the complete guide

Подписаться 293 тыс.

Просмотров 522 тыс.

50% 1

In this video Taryl and Taryl Jr. demonstrate how to repair two leaking Briggs and Stratton carburetors. Have gas in your oil? Gas leaking out of your carb? You must have a leaky carburetor, watch this entertaining video to properly learn how to fix two kinds of leaking Briggs carburetors. And There's Your Dinner!!
Please Subscribe to the channel and Thumbs Up our videos and be sure to 'Like' Us on Facebook for all the latest news and updates!
You can pick up all your TARYL APPAREL here: www.tarylfixesa...
(T-Shirts, Coffee Mugs, Shop Products and More!) Shippping worldwide and daily!
LIKE us on FACEBOOK! / tarylfixesall
We're on INSTAGRAM too! @tarylfixesall
#carburetor #repair #diy #tarylfixesall #grassratsgarage #smallenginerepair #mowerrepair #mower #lawnmower #engine #smallengine #kohler #briggs #briggsandstratton #howto #fix #carb #float #floatbowl #gasinoil #gas #oil #leaking

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 320

@TarylFixesAll 3 года назад

Help support the channel by grabbing some Taryl T-Shirts, Coffee Mugs and More! Shipping Worldwide Http://www.TARYLFIXESALL.com

@pablocruisefromsocal 10 лет назад

I don't care what they say bout you fellers. You're alright in my book. Changed out my Walbro's needle and seat thanx to this vid. Thank you!!

@kylewalker5703 4 месяца назад

this guy is the only person that knows whats really up this is the 3rd time that his video is what i was looking for and well explained. Thanks Taryl good shit bro

@STK10VA 6 лет назад

Easily the greatest video put on the internet.

@hughchristian1976 7 лет назад

Mr. Dactyl, You are a valuable asset. Thank you sir

@Dan-rs1nb 4 года назад

Taryl I commented on a few videos. I hope you understand how much you are appreciated. I have an old MTD that you have helped me maintain and fix. The parts are not expensive but the knowledge and time is. It wouldn't be worth putting the amount of money into my machine that you've saved me. I really am thankful. You are very talented as a mechanic and as a movie star and director. Hope you and your family are safe/ stay safe.

@paulg444 5 лет назад

That intro was solid RU-vid gold!!

@Mike-rf3kl 10 месяцев назад

I love the man Terrell senior, but I really like when taryl Jr does a hands on presentation of a how to video. To everyone involved with this channel you guys are a great family. There's your dinner 😎

@treeman765 4 года назад

I used your heat gun trick on my float and it worked like a charm! Thanks Taryl you the man! And the videos crack me up lol fun to watch and I learn a lot

@twosnjuk 7 лет назад

Taryl ... you are the best. Whenever I need help, you are the man.

@westalianham 7 лет назад

Dam thats a fine fix. My old lady didn't like me using her hair dryer but hey I said you want u want good hair or the lawn cut. Appreciate the Nikki fix. You guys rock

@chadbosko8935 2 года назад

After wasting almost 40$ on a big o ring and a needle valve I found out from this video I just needed to use my heat gun, I did that and wreaked my float, fastest and easiest way to fix your float but also the fastest and easiest way to destroy it. I'm ending up sending for a new carb which cost almost the same as the parts, live and learn. P.s. I just thought of something it's too late for me now but u people who haven't melted your float yet, after washing away any gas I would take one of those long neck lighters and hold it just near the piece u want to bend while pushing down with a mini screwdriver without destroying those thin tabs that hold the need valve.

@nicolec7290 4 года назад

Watched 1 million videos. & again you have saved the day. Actually it’s 9:00 PM. Indiana

@1spark2 6 лет назад

OMG. I thought this was just a comedy show. I learned 2 things i never knew about,awesome! Funny shit, "Yah i got it dad all right!!! Take it easy boy,this film was expensive!!" Hahaha....

@camtheman559 Год назад

I admire your pocket screwdriver collection! Pretty impressive bud!

@mrfixit7061 6 лет назад

Mower would not start. Rebuilt my carb, no change. Did the heat gun trick...… worked like a charm. Thanks guys!!!!

@W3BL4Z3D4NK 9 лет назад

Nice job on the home made tools guys! Thanks for making the video so others can get this done as well.

@TarylFixesAll 9 лет назад

Jordan Wetz Thanks Jordan Taryls all about Saving time & muny. And thars your dinner

@scavengersgreen 7 лет назад

Could I maybe find a roll pin that would make a sleeve? Wait, ! I need the heater gun. Where's lunch ? I aint mysef when i'm hungry, sorry.

@scavengersgreen 7 лет назад

JK. I do need the heat gun but I didn't know til I saw this. Good job Sr. You 2 Jr

@michaelbedell6523 2 года назад

All y’all are a hoot and provide excellent information. Keep up the entertainment that makes the knowledge easy to digest

@VikingRul3s 5 лет назад

THANKS!!! This just saved me $120 on a new Nikki carburetor. Was able to use your tips to get a new seat in my old Walbro, cost me $18 👍👍👍👍👍👍👍👍👍

@michaelmcdonnell2571 3 года назад

Done this and it worked. Thanks for video. All the way from Ireland 🇮🇪

@walleyewilly8085 9 лет назад

I'm proud of ya boy's. Mmhhhmmmmm! You fixed them carbs up good, Real good!

@mdlanor5414 7 лет назад

Your video is the only one i could find that uses a heat gun to make a adjustment on a plastic carb float. Common sense told me that Heat could be used, to make this adjustment. I just needed to see someone do this. Great job on your illustration. The heat gun worked great. You just have to be careful when using the heat gun. Have a glass of cool water to dip the plastic.after you make your adjustment, dip the float in water to cool the plastic tab,Take your time, and this will work. No rebuild kit required.

@LIMowersAndMore 7 лет назад

thanks taryl for the face book reply this really helped me

@TarylFixesAll 7 лет назад

You're welcome!

@5153flash 4 года назад

I was working on one of these leakers one day. I pulled the spark plug knowing the chamber was full of gas. I just didnt realize how much gas was in there. With the spark plug wire hanging down and spark plug removed. I did the wrong thing. I turned the key to push the gas out. The engine turned over and shot gas everywhere,,way more than I thought would happen. At the same time the hanging plug wire found a ground and sparked!!!! And it blew up in my face,,throwing me across the room and started the whole area on fire!!! I had a fire extinguisher handy and put it out immediately. But it scared the crap out of me!!! The amount of gas that came out was huge. Dont ever do this!!!

@dglacken Год назад

Same thing happened to me yesterday! Although I wasn't in front of it. Gas sprayed out of the open spark plug hole like a garden hose. Caught a spark and BOOM! Fire ball! Not sure how it got a spark either because I had disconnected the spark plug. Luckily I was outside in the yard. Ran for the garden hose. It is amazing how much fuel collects in that combustion chamber. But how else do you clear it out, right? They should really have a service bulletin or something out on that. Very dangerous to have fuel just constantly flowing into the combustion chamber and crank case. Very poor design.

@jusmavideos33 9 лет назад

Awesome!! You guys are funnier than hell. Keep the vids coming.

@kevinleee3408 Год назад

I was just wondering if heating up afloat and bending the tab would work now I know it will after watching this video you guys are the best

@1MarkKeller 6 лет назад

Thanks Taryl! I knew you'd know how to fix what was wrong with my mower!

@bowmanw1839 10 лет назад

Funny and informative. Really liked the making your own tool to remove the seat.

@bowmanw1839 10 лет назад

Taryl, I have rebuilt carbs for a while now but I am missing something. Sometimes I can't stop the engine from hunting. Running high and low I have replaced replaced new carbs and they run smooth. So what am I missing on those rebuilt carbs?

@nixthematrix 10 лет назад

David Wilson If I might make a suggestion, it sounds to me like the idle jet is clogged-it happens sometimes when a carb is cleaned; a tiny piece of dirt is sucked into the idle jet after reassembly and startup, which causes the surging; I'd suggest being meticulous about even the smallest piece of dirt during cleaning and assembly.

@bowmanw1839 10 лет назад

Thanks

@overmarsdaria3222 3 года назад

Thank you for the tutorial , really save me a lot of agro.

@brucemarshall9521 2 года назад

Heating up the tab on the Nikki carb works but you have to be careful with the heat. The slot that the needle hangs on is super thin. My first try the slot started deforming and would no longer hold the needle. Back to ebay and another float. Heat a little and bend the tab a little. Took 4 or 5 tries but it worked. Heat and push and hold till the plastic cools. Thanks, guys.

@hossg.7217 4 года назад

The kid tellin' dad off, funny stuff. The kid is a good addition. Get a chuckle and learn somethin'... Good stuff guys, keep it up.

@Thurge Год назад

Okay, your channel is the only one I've found that showed an actual solution to this problem with the Nikki carb. Everyone else said change the gaskets to stop the fuel leak problem. I'd love to see an episode where you drink a potion and become Tarrell Dactel the cool and suave version of Taryl. (Kind of like they did with Steve Urkel...) I really appreciate your videos even though they are super campy, corny, and sometimes difficult to watch. 😁👍

@matthewadolph51 2 года назад

This is a grat vidja yall thanks a heap I been lookin for a few smrt fellers like yall I shur do presheate it. It were reel good like on learnin me what I needed ta be noing ta fix on my lanmowr

@bluemax2170 3 года назад

That heat gun trick just worked like a champ!!!

@ozchapman9443 9 лет назад

Best video ever!!

@HoangTran-ir5pt 8 лет назад

God bless you guys.. I had the problem with the Nikki carb. The float on the rebuild kit was also bad.

@user-yg4br9ji1n 2 года назад

Hey Taryl, I am a mechanic and I have been watching your videos for a long time. For this leaking carburetor issue, I have come up with an idea. Frankly, I'm surprised you did not come up with it 1st. I'm going to try installing a normally closed 12 V solenoid in line. Please try it and if it works, please do a video on it.

@antoniocausin3189 4 года назад

THANKS TARYL ANOTHER GOOD INFORMATION YOU GIVE US,...............THERE'S YOUR DINNER.....

@sweetieofks1 5 лет назад

👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽🤘🏽😆👌🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽 absolutely awesome performance sir!!!! Thank you !!!!

@DAS-Videos 6 лет назад

In my experience that I just had today, do not take installing a new seat and needle for granted. On initial install, my mower leaked. Found your video and bent it a little, and it still leaked even after doing a table test blowing into the carb which tested good. Third time I pulled out the seat and examined it, shot carb cleaner down the tube again lubed the tube with WD40 and reinstalled the seat and used the original needle. Third time was a charm, no leaking.

@stephendecato 3 года назад

I used the heat gun and got hot fingers but it worked like a charm. Thanks.

@CraigArndt Год назад

Heat gun and a gas soaked float! Whoooooo!! Whoooooooooo!!! There's your Dinner! Haha!

@2geniussaredneck658 8 лет назад

taryl can u make a video on how to make that tool please thanks and I love your video's u always help me out

@TarylFixesAll 8 лет назад

just a 1/4-20 self tappin screw and a 1/4-20 nut and a piece of tubing you can get from the auto parts store for a sleeve to fit around the seat. Thanks fer watchin Taryl

@paulhaines5755 7 лет назад

As a small engine repairman beer drinkin' wanna-be I have something to add: a non-venting or poorly venting gas cap will cause a gas leak as well. Pressure will build in the tank to the point where the float needle in the carb won't remain seated. A hidden problem that people over-look.

@carpediem4887 7 лет назад

Paul Haines... Thanks for your comment brotha. My honda gxv340 carb was leaking out of the overflow... Turns out a piece of crud was stuck in the vent on my snappers gas tank cap. You saved me alot of trouble with that comment... Thx again

@murraychadwick9362 Год назад

"I got it dad, I got it 🤨! Lol Junior you did good 😂 👍

@jeankasper3464 5 лет назад

*Its a beast!>>>**ur2.pl/999** it chowed down on heavy wet snow on the first pass. At least 3 inches in some parts. Its a little tough to turn around but it really does throw the snow 30 feet. heavy duty tires. the welds were tight and clean. the chassis solid metal as is the chute. its solid. the plug in and push electric start, awesome.*

@kramerky 5 лет назад

I fixed my leaky nikki carb by slightly loosening the screws on my float bowl. - After replacing the needle,float, and gaskets, it still leaked. Then i realized i couldnt hear the float moving when i flipped the carb upside down. Apparently my nikki carb bowl is shaped in a way that if i tighten down too much it makes contact with the float and doesnt allow it to move. Loosened it a small bit and the float moves freely and doesnt leak anymore.

@silwan6784 4 года назад

Thanks for video. Just ordered seat and needle for my Walbro cause the Chinese Nikki knock offs just don't adjust properly and can fail at anytime. Keep fixing the old carbs fellars

@anniversary4 8 лет назад

Thanks again for another great video. I had this exact problem with my Intek engine. Has the Nikki carb with that squirelly carb gasket that won't fit once you take carb apart. Can I just replace the Nikki with the Walbro?

@patbradley916 2 года назад

Thank you Taryl

@Eddiepurple1 9 лет назад

Thanks for the info and the laugh. Like the humor. Keep up the good work.

@qzorn4440 4 года назад

what a wonderful Hollywood production... :)

@matrox 4 года назад

My Briggs and Stratton engine in my Mowa came wit a Holley Double pumper.🤪

@ScottMiller-tu3gg 6 лет назад

Valuable and great information as always from you guys! Thank you so much!

@shannonbrooks8834 9 лет назад

You guys are AWSOME. Thank you and GOD BLESS.

@wallyblackburn 9 лет назад

Worked like a charm!!! Thanks! (Be nice if they had brass replacement floats)

@jptrainor Год назад

The Nikki carb's gasket and fuel inlet oring can also leak. Both seal the plastic inner part against the upper carb body.

@clutch5sp989 2 года назад

The heat gun trick worked for me. A 45 will also work.

@rosco9957 8 лет назад

how do i adjust my snapper pro 36 " walk behind belt drive correctly? i have watched most all videos of yours great job i have learned a lot thanks thomas

@TarylFixesAll 8 лет назад

+ros co Not pullin hard enough?

@REVNUMANEWBERN 8 лет назад

I have a V-twin B&S 16hp Vanguard Model 303777 Type 1145-E1 on a Snapper, BOTH the throttle & choke cables were no good, installed new ones BUT need to adjust both correctly. The cable housings/sheath on both was broken & stretched so I didn't have any faith in where they were tightened down to engine. NEED setting for both, B&S engine manual & snapper manual doesn't have settings.

@markjohnson7508 3 года назад

BAMMM! NOW YOUR COOKIN W TARYL LIVE

@kenh9176 5 лет назад

on the niiki i used a hair blow dryer but couldn't get that centre tab to bend as it's quite thick. I actually twisted the whole cross piece.

@nuttybuddy41 8 лет назад

thanks for all vids..help alot.. i have a carb that i have to replace. The original came off a 15 hp riding mower..the other did to but dont know what kind of riding mower. anyway the original has one main side jet(the one thats in the float bowl) while the other has 2..will this make a difference..thanks

@kieferwarrior 8 лет назад

used the heat gun and successfully stopped the carburetor leak. Thanks for that trick. Wasted time and money getting a new needle when I just needed to seat it in better. So from here is it necessary to change the oil from the gas backing in? Whats the word Taryl?

@SuperDoright 8 лет назад

I'am running my mower dry after use, using a shut off valve. Is this necessary? Now I think it's messing the float up just hanging in a dry bowl.

@TarylFixesAll 8 лет назад

Why do you think that?

@inthelandofmilkandhoney457 Год назад

Your Amazing Taradactyl 👍

@FredFlintstone21 5 лет назад

This must be an older video from ya'all. I thought it was called a carbITrator. Good edaMAkation video right there! Yes sir!

@nonenone8819 4 года назад

6 years ago now! Lol your comment was from a year ago!

@fanman1981 5 лет назад

My carburetor is different from those it’s off a Briggs and Stratton twin.. 20 yr old craftsman..I’m assuming is a walburo.. with a fuel pump..It’s only a month old and there’s gas in my crank case.. what causes it? And do I just melt the tab o float.. and to avoid change the oil a 3rd time should I take it off from the pipes going into the engine and see if it leaks?

@jamesbracken4618 4 года назад

I call it a jam nut, but if you don't want to be right call it a jack nut. GOD BLESS YOU! GOD BLESS AMERICA!! GLORY BE TO GOD!!!

@fgs2732 2 года назад

Thank you sir. You are a genius

@lilperchhunter 4 года назад

thanks Dr. T, I just used my super hot coffee to heat up the tab on on the float because I couldn't afford a heat gun due to my Dentist bill.

@timrosenbaum3499 4 года назад

Great video

@ezseal1973 5 лет назад

Thanks for the tip Taryl. Will a hair dryer on hi work as I don't want to buy a heat gun costs more than a new float?? Are you heating up that whole area so when you press the tab down it twists the entire part between the hollow float sides downwards?? Thanks again

@richardanderson5109 3 года назад

Taryl made a mistake, you should lift the tab up,it's already too far down that's why the float is Raising all the way up to the top of the carburetor allowing the fuel level to go higher than it's supposed to and pouring into the engine crankcase, "just sayin" ♿ 🇺🇸

@bobbysprinkle6086 3 года назад

Thanks Taryl for your advice I did what you said it works buddy

@JohnHappelFullMastHap 8 лет назад

At the time I watched your vid, 25 peeps didn't understand the humor in being a mechanic.....LMAO!!!! Nice job sir Taryl!!!!

@TarylFixesAll 8 лет назад

+John Happel (Full Mast Hap) Thanks John! We use real scenarios so people in our industry can relate to how things are.

@eugeneharmon1983 7 лет назад

All your videos 🎥 are funny as hell n very informative

@GalenCop9 4 года назад

First of all, thanks for all the post's and sharing your knowledge, helps out tremendously. I have a Kohler 3000 series 6.5 horse on a tiller that is getting gas in the oil. Have you had this issue with any of the Kohler's motors you've had in your shop. it acted as if it had locked up but "magically" came out of it which I believe it was probably hydrolocked. What's your thougthts, Taryl?

@charlesroberts6490 3 года назад

Damn your the man taryl

@kevinbolin7665 9 лет назад

Even though yuz did fix the walbro carb with new carb parts you should really check the pop off pressure of the carb with its new parts /gasoline can have a instent effect on Viton tips on inlet needle valves.

@xs473 7 лет назад

you are freaking awesome

@justinfoster6135 5 лет назад

Literally

@somewhereusa9602 8 лет назад

Dear Taryl jr, what is the seat material, please? Is it some type of elastomer or metal, please. Nice video. Thank you for these very informative videos.

@TarylFixesAll 8 лет назад

+Somewhere Usa Brass

@andrewdickson9964 Год назад

I like it how he ripped it in to taryl . I got it

@jamesdoe9874 9 лет назад

Great video, nice work making learning fun.

@dave1135 8 лет назад

Another issue I've run into with these Nikki carbs that has the same issue but the float is fine, is the molded rubber o ring between the plastic flat holder and the carb body will deteriorate, letting fuel leak past the needle and seat, flooding the crankcase. Usually results from the customer running ethanol fuel. Also, if you order a replacement carburetor, Briggs and Stratton will substitute the walbro for the nikki.

@CS-ug8tz 4 года назад

Taryl i like your videos , i have question man i have a 18hp Briggs Stratton is crack up but sometimes not and small a fuel my think is may be the sparplugs coil or why geting over flow what can be?

@shanesayger9076 4 года назад

Reminds me of my dad and I lol good job fellows

@garygerard4290 3 года назад

got a Nikki and that problem and a heat gun. gonna get coffee'd up in the morning and give that float a lookin' at thanks

@Southernshaker 8 лет назад

I had a leaky needle and seat, had to start wearing depends.

@tomparks9432 6 лет назад

Fucking hilarious. Logged in just to say thank you.

@gmw1964z 7 лет назад

Taryl, I have a Nikki on a 5yr old 31p677 and it runs rough at low idle. It has the mixture screw that cant be adjusted. I believe it is the carb. What do you think?

@victoryfirst2878 3 года назад

Hello Taryl, could you please tell me what carb is better??? Nikki or Walbro. How would you fix a nikki what has a bad seat ??? Thanks fella for your dinner too. VF

@randyramer7988 4 года назад

Man yall missed your calling!! Lmao!! And learned a new trick.

@georgetucker336 3 года назад

Nice seat puller.

@silentwalk1768 3 года назад

thanks now that's a good hack rather then tossing it thanks ya

@paulwel 4 года назад

Now that there is some real backwood engine-nuity! That there heatin up the tab on the float bowl and bendin it trick worked better than a pig in slop. Thanks y’all. Merica! KAG 45!

@GmGarlo 9 лет назад

hey taryl would you put the shut off valve between the gas tank and fuel filter or between the fuel filter and carburetor . PLEASE HELP TARYL i need my dinner TARL.

@Bobw2bs 4 года назад

hey Taryl why is gas spewing out of the vent hole in the gas cap? its a lawn boy two stroke. I tried a different gas cap with the same results. Never did this before just started out of the blue.