How to Fix a Paper Jam on AmazonBasics 6 Sheet Cross Cut Paper Shredder 

Jam fixed bc of this video and saved me about $50.00 on a new shredder. Thank you !!!!!!!!!

Thanks! It took your video to point out to me that there was a screw under that warranty label. I had wondered why it was "stuck on something" preventing me from "prying" it apart. So easy...Phew!

Thanks so much! I was able to help fix my parents shredder. Wouldn’t have been able to do it without the video.

Thanks! What a relief to be able to fix the jam myself.

Great video. This fixed my jam issue perfectly!

Thank you for making this video. I was able to fix the paper jammed.

Thank you, this video help me out with my paper jam.

This was helpful. Thank you and may god bless you with many children.

How do I put the sensor back in? You say put it back in but don't show how it's done?

Thank you for posting this video. I got mine fixed 👍👍👍

Thanks, helped me with my shredder!

Thanks! I had no idea I could open it like this. My issue was a jam and that the light emitter was pushed out position. It looks like the plastic mount for the light emitter/laser was broken but I was able to push it back in place for now. This video helped me keep it alive for a little longer.

Hi thanks for the video what size of screw driver did you use

The Amazon basics 12 cross cut is different could you do a video for that one

Thank you for the info of the hidden screw!!

Thank you sooo much for this video! I was like there has to be a way to completely open this thing. That hidden screw ran up my blood pressure.

Very easy tutorial I’m going to try on mine now thanks a lot

Do you have a video how to fix an aurora au2000ma

Awesome … thanks dude … you da best

Thank you so much!

Imma try this

Thank you very much I'll try it tonite

Excellent!

I watched this good video because I was trying to troubleshoot the sensor. The sensor was working fine - unit will not turn on unless the top assembly is mounted on the receiver can. (I was trying to make sure it worked before putting it back on the receiver can.)

Thank you!

It works. Also I found a 2 broken standoffs that hold infrared sensor. It is easy to fix them with hot glue.

I love how glock makes its own bb guns and how they make them look so real ru-vid.comUgkxnX9wE_Q8zvF75Y5iWzTU3Q4FlrtyGApQ , the only thing is that the slide doesn't move back. The sights and the body structure is so similar to a real handgun, fits in my hand perfectly but I actually ordered it with the 40 pack of Co2 tanks and they never arrived even though it said that they handed It to me. Was not able to test the accuracy since I didn't get everything I purchased which is frustrating and that's the whole reason why I got the bundle so it arrives together. So the Co2 tank happens to be a third party so it makes no sense to put it in the bundle if it doesn't get shipped at the same time, the BB gun arrived first then the Co2 tanks were supposed to arrive someday later but didn't, which doesn't make sense. I recommend just ordering the gun itself so you don't get the same issue I ran into plus there's no option for a refund. How stupid.

How should the sensor be oriented? Can't seem to get it back in

Thank you very much

The last time my shredder jammed, I laid a sledge hammer on it. Voila, jamb free forever!

So I took out the jammed paper shreds out and I screwed it back and now it doesn't even turn on. The green light doesn't even come on. Any resolution to this?

Thank you! :)

Awww there 6 screws I was like damn I can't take it off thanks for this video man 😅😍

Thanks!

I got a slightly different model and it's got many more screws, most of which are hard to get to without the world's most perfect screwdriver. Had this damn thing for 2 days. I shouldn't have bought the cheapest one they had.

Thx!

Thanks! You just saved us $70

My shredder had SEVEN screws. One under the sticker. Damn. Almost cut my fingers! Thanx!

OMG I fixed the jam... the secret screw!!! HAHAHA thanks

I couldn't exactly put the sensor into that slot or something. It didn't go in. Is it ok that I've just put it far from the blade? Can you send a quick picture on where to put the sensor?

After thinking I unscrewed all the screws and the cover still not opening, I decided to RU-vid this only to find out that a pesky screw was hiding under the sticker

GREAT video but you should have emphasized how to position the sensor.

Great video ty helpful but I'm having trouble putting it back together with sensor. Won't turn on :(

Could you please take a picture of how the sensor should be put back in properly thanks

My shredder isn't an Amazon, but your video was very helpful nonetheless.

can ii return be return for a another one

Still can’t figure out how to put back the sensor

I did mine & now it wont turn on??? did i not screw it back tight enough because it felt tight when i did

I still cannot find out how to put this darn sensor back in correctly

Do you periodically use special oil on the teeth, or inspect the gears? Thanks & great video

Cross cut shredder how to open it up

🎉

I bought this and it stopped working within 10 minutes.

The screws arnt not coming out 😭

Don’t forget to unplug first!!! 😳

Stupid sticker hiding a screw completely stopped my progress lol. Thanks

When you put the lid back on, you need to put the sensor back in the correct place..wish the guy in the video showed everyone where.