How to Fix an Air Nailer - 23 Gauge Pinner (Pneumatic Nailer Repair) 

Teşekkürler, tanks 👍

Thanks man, I'll try to fix my nail gun

Veeeery helpful, thx brother, Bob from Belgium Europe

Very helpful, thank u Colin!

Thank you so much. My air nailer stopped working yesterday and I was able to fix it within 1 hour.with your video!

Good job Colin. Hey extra oil is better than no oil and nice that the manufacture supplied the replacement parts for the install.

Thanks Colin. Great timing, mine just jammed as well. Now I know what to do

I also have one of these that a friend gave me when I was installing my new baseboards. He told me that it jams all the time and he didn't want it anymore since he got a better one. Thanks for posting this video, if it jams on me I'll check this pin to see if it's damaged. I appreciate you uploading a video like this even though it's different from your normal videos!

Thanks Colin for this video, I have just had the same problem and got the replacement pinner. Now I will repair the blocked one. Just a note for the member that mentions that all pinners come with Manuals this is not true for the ones that come from china into the UK, there is no manuals with them.

Just wanted to say THANK YOU for this video. I have a nailer that is 99% the same as this one and your video helped me figure out how to get in that back part/cap so I could identify an unknown rubbery part that had started to disintegrate and blow up thru the cap--which then caused air to leak out at a fast rate. In my case, it was an o-ring. Unfortunately, the gasket that sealed the cap part came apart when I pried the back off so I may not be able to replace the gasked even if the o-ring is replaceable. Even though it's old, it was working great until the o-ring failed so figuring out how to fix it is better than sending it to a landfill in my opinion. I also want to mention to the peanut gallery telling you to consult your manual first: this nailer had woefully inadequate "operating instructions" and no manual. There's no exploded view, no parts list. Really the most basic of guidelines. Nothing useful. As for breaking the warranty, this gun was made circa 20 years ago so the warranty had already passed by the time you opened it up to fix it. Kudos to your "every man" real world video.

It's always nice to revive a tool. Good job!

thank you

Great video Colin, sometimes there is great satisfaction in fixing things which appear broken. Brilliant!!

Perfect timing!!

great video, i was back up and working within ten minutes

I found a good deal on a Hitachi compressor nail gun combo, it works great so far

you got it right

Well done Colin. I like that "let's discover together" presentation technique. Risky but confident that you can plow through it. :-)

Ty

Good work

Pls, make video about coil nailers gun topic : how does nails move up from nails box? Thanks alot.

The plastic/rubber ring is to protect your work when pinning on a fine surface Colin. It's called a "non marking nose"

that plastic washer goes before the barrel. Over time it perishes.

Colin ,I put some lube on all my pins as I put them in works very well no jams.

hey if it's broken and not working you can't really do any more harm. may as well take it apart and see what is going on. Nice work Colin!!

I just got a Porter Cable 23 guage nailer and it CAME JAMMED. Literally the first pin I put through it left the plunger all the way forward. Well, my Dad has exactly the same model, so I took them both apart, side by side, cleaned his, then reassembled them. His works, mine does not. They are both clean, free of jams, and have parts in apparently good working order. Porter Cable can lick my taint.

Where can I order that piston?

the piston and the rod can be separated, that's to allow you to file, and re shape the striking part of the pin, then insert it in the piston again.

umm what's a instruction manual....hey as I mentioned the email I just took mine apart did a little sanding to the driver tip an the driver cap...thanks Collin works like new again....didnt need any new parts..yet...thanks...

I'll wait for the blindfold test after you have to take it apart a few thousand times.. I'm getting there with harbor freight as if it's somehow become my lifes work to take the darn thing apart to unjam..

Wow

Good instructions Colin, what kind of nail gun is that? looks like the Harbor freight one i have, now i know what to do if it jams too. thanks for sharing. Chuck

👍🏻👍🏻👍🏻

Colin why didn't you check the owners manual since they gave you extra parts they must have instructions on how to install them. Love your videos.

Great video! Hey just curious did you ever figure out what that extra black round part was for? (the extra piece included with your pin nailer that looks sort of like a little black rubber plunger) Thx!

Another great video Colin. I have the same pin nailer but it's still going strong. They are cheap but work very well for years. You can redress the plunger head by filing it flat again but you have to ensure you do not remove too much metal. Derek

Woodworking tools usually come with manuals but hardly any woordworker reads them. Me neither.

I repair both of mines or 18 gauge I don't remember the name of that part but it only causes $5 on the internet and you can always replace them that's the only thing I goes bad on them early good luck just thought I'd let you know there is a website that sells all those parts.

Have the same pin nailer I can adjust brad's length it's stuck. any advice?

Don't throw the old piston away. The pin driver part can be dressed with a fine file and reused.

My cousin got a Stanley nailer from a bunch of trash he was bidding on that he gave to me. I plugged it into the compressor, and nada! I may try this and see if it can be salvaged. I was about to have it back to him this weekend. Otherwise, whilst I thoroughly enjoy your videos on RU-vid, your Facebook page is leaving a lot to be desired for. What with all those click bait links. What's the story there?

Mechanical tools are usually easily repaired. It's the electronic/electrical that's nigh impossible to repair when the magic smoke gets out.

If you look here at 3:44 you can see the exact moment the manufacturer’s warranty is voided 🙂 And Colin, it’s ok to look at the user manual every once in a while 🙂. Great video as always - thanks for sharing.

a drop of oil frequently does the job

Hello Collin, where I can Buy the PIN?

a couple of oil drops daily and it will last for years!

use brass not steel