How to Fix an Engine Knocking Noise on a 2012 Hyundai Veloster (Episode 2)

Подписаться 2,7 тыс.

Просмотров 9 тыс.

50% 1

Hello PIBRACERS,
In this episode we continue to work on the knocking noise on the 2012 Hyundai Veloster. Watch the video to see how we fixed it. We hope this video was helpful to you. We hope you guys enjoy the video as much as we did. Remember to like the video, subscribe to the channel, and comment down below any suggestions or questions you guys might have. Thank you for watching!

Авто/Мото

Опубликовано:

27 фев 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 71

@thingamajig6542 11 месяцев назад

In most cases when you have a spec that calls for a torque plus 90 deg, then it means the bolts are torque to yield and should not be reused. You can reuse but you are risking that one of the bolts might come loss or may not be applying the required clamping force. Thumbs up on your video work and it looks like you enjoy wrenching. Cheers

@kurtistraux8435 2 года назад

My hat's off to you sir. Great job and happy cruising when you finish.

@PIBRACINGCHANNEL 2 года назад

Thanks man and thank you for the support

@alij.7390 Год назад

Great job man, thanks for the material and content! Purring amazing.

@PIBRACINGCHANNEL 11 месяцев назад

Thanks so much.

@kwatl Год назад

Awesome video! Keep it going!

@PIBRACINGCHANNEL Год назад

Thank man!! Thanks for the support.

@ayiafoxe706 2 года назад

Amazing!!! I’m ready for you to do mine nexttt✨

@PIBRACINGCHANNEL 2 года назад

Let me know and i will.

@nestalicortez9082 11 дней назад

Brother I really enjoyed your video thank you for showing and sharing information, where are you located at I'm going through the same situation with my car I am the proud owner of a 2011 Hyundai Genesis Coupe 3.8 I'm having a very loud tapping sound on my engine

@PIBRACINGCHANNEL 11 дней назад

Glad to help you guys. Thanks for the support. Unfortunately the problem with the Hyundai engine it is the knocking. If you use 83 octane fuel the engine will be constantly knocking and eventually that will create a play in the pistons pins that will sound like valve train problems.

@doronaky Год назад

great videos! very helpful (: I have veloster 2011 NA and the fuel consumption in the city is 19 mpg with eco on and relaxed driving with minimum ideal time. also there are noises from the engine that sounds like little explosions that you can feel(the car shakes a little bit) more than hearing and its comes in irregular pace. do you have any suggestions what it could be? Thanks!

@PIBRACINGCHANNEL Год назад

The first thing you have to check is the coils. When they are starting to get bad then to do that that you are describing. And change the spark plugs also. You have to start with the cheeper parts. A question, does it have the check engine light on?

@hanley7707 Год назад

Where did you buy your parts? Pistons, rods, gaskets, etc. Did you use the old tensioner? When installing the timing chain gears to the cams, do the gears only go on a certain way so you know it's not rotated in the wrong direction? My friend's Veloster is burning oil and I'm thinking we need to do this exact same job you did. Do you think it'll solve the oil burning issue?

@PIBRACINGCHANNEL Год назад

I googled the parts online and bought everything oem. I used the old tensioner because everything was clean and the car didn’t have to much millage. The timing gears have marks on it. If you put everything together with new parts it will fix the oil burning from the pistons side but you have to check the head also.

@aldrinsegarra9276 Год назад

Quedo bueno

@user-im3oz7vm6d Месяц назад

Where did you get the parts from?

@soundsofexpressions3720 Год назад

so glad i found your channel I'm fixing to rebuild my VT, other than the pins being different in the connecting rods how simmer is the na to the turbo?

@PIBRACINGCHANNEL Год назад

No different at all,engine wise but the external stuff like the piping and turbo everything else is the same, Internals are stronger in the Turbo one.

@PIBRACINGCHANNEL Год назад

Thanks for your support. Remember to share ti help us grow and make more videos that han help subscribers like you. If you need more help just let me know.

@BEERSnGEARS Год назад

How did you get the upper oil pan off to get to the piston bolts? I got the 2 bolts off from the inside of the bottom after removing the oil pan. Got the bell housing bolts out, and the 8 or 10 bolts around the sides. It's coming off at the front of the engine (timing chain side) but it is not coming off on the back (transmission side)

@PIBRACINGCHANNEL Год назад

You have to cut the pins on the side of the transmission with a thing grinder wheel. This is the only way without taking out the transmission.

@stunter78 9 месяцев назад

@@PIBRACINGCHANNEL Im not that far along yet, still working on the head and timing chain. How many pins will I have to cut on the tranny?

@spookyzooki1985 2 года назад

Awesome video and subbed! Just picked up a 2012 Veloster non turbo and trying to get all the info I can on these things! So you basically what is called a top end rebuild correct?

@PIBRACINGCHANNEL 2 года назад

Well I put brand new pistons and connecting rods. This is because the noise was coming from the pistons pins and damage both parts. For the rest of the engine everything was in good work condition.

@spookyzooki1985 2 года назад

@@PIBRACINGCHANNEL yeah I read online the early models were known for weak connecting rods eventually causing possible damage to the engine block. Who did you go through to get the new pistons and rods and rings?

@truckandtea 7 месяцев назад

I have 2015 maybe same problem. Knocking engine. How much dose that cost?

@TerryCarter-b9q 2 дня назад

Where are you located i get you to fix my 2019

@codyberube2995 10 месяцев назад

So for the cylinder head studs is it just torque until you can’t anymore or do they torque to 21.7 ft lbs

@PIBRACINGCHANNEL 10 месяцев назад

22 and then 90 degrees

@user-tl2rg4te4z Год назад

This is a nice job and a great video. Thank you. Which city are you located?

@PIBRACINGCHANNEL 11 месяцев назад

Thanks so much We are in Kissimmee Fl

@Jesco92 2 года назад

I have a knocking noise on my manual transmission veloster n.a, i notice it happens when theres a load going to the front of the engine. Is that the issue you faced? Most people i went to have no idea what it is. Appreciate the advice if you could give it!

@PIBRACINGCHANNEL 2 года назад

Yes and at first I thought that the connecting rod bearings but it turned out that it was the pistons pins that were producing that noise and you ac see in my video how I fixed it.

@danjones6702 Год назад

how many miles did you have on your vehicle before it started to happen?

@Mr.t7O7 7 месяцев назад

How many torque head gasket

@askyourselfwhatdoyoureally3542 Год назад

Did you order the rods for a 2016. I know the rods are thicker on the newer models

@PIBRACINGCHANNEL Год назад

No the oem ones. The problem on this are not the rods the problem is that if you use 87 octane the engine runs knocking and that constant knocking damage the pistons pins and the rod bearings.

@crazee6821 Год назад

Could you give me an estimate on how much you would charge me to do this exact job on same exact model ??

@hellbun7777 2 года назад

Hey i need the torque specs ans sequence on the engine do u have them by any chance

@PIBRACINGCHANNEL 2 года назад

Yes It is 21.7 lb-ft + 90Degrees +90 degrees again from center to outer bolts in a x pattern.

@luistapia9608 Год назад

I see that the oem parts come in grades, a b and c. I assume for oversize. what grade did you get?

@PIBRACINGCHANNEL Год назад

Everything standard OEM parts.

@janiceyoungburks4370 8 месяцев назад

Hello i have a 2013 veloster base sport , put in brand new battery , car won't crank while in park, park light blinking , but will crank in N, it makes a clicking noise. Please help!!!

@PIBRACINGCHANNEL 7 месяцев назад

It sounds like a bad neutral safety switch. That is a switch on top of the transmission that tells the computer that the car is in parking so it will let it start.

@askyourselfwhatdoyoureally3542 Год назад

Where did you purchase your parts for this rebuild?

@PIBRACINGCHANNEL Год назад

Online. I google Hyundai oem parts and bought everything online.

@oliverthemechanic8532 2 года назад

Nice video mate 😉 where can I order a part’s mate same problem my Veloster with yours 😅

@PIBRACINGCHANNEL 2 года назад

www.hyundaioempartsdirect.com/

@PIBRACINGCHANNEL 2 года назад

I googled oem hyundai parts and the choose the one with the best price.

@oliverthemechanic8532 2 года назад

@@PIBRACINGCHANNEL thanks for the reply mate roughly how much you spend on the parts?

@DanielMercado-hn3lf 2 месяца назад

Did you need a helper mechanic in there b-cuz look you get toast up&down working in the floor let me know I'm ready for any car

@PIBRACINGCHANNEL 2 месяца назад

Thank for the offer but not for now. Let you know in the future if I need one. Thanks for the support

@artisesmithlocalhyundaidea2101 2 года назад

Where do you buy the pistons ?

@PIBRACINGCHANNEL 2 года назад

I made a search in Google and looked up for oem Hyundai parts and the chosen the best price store.

@danjones6702 Год назад

how long did the engine last before engine issues?

@PIBRACINGCHANNEL Год назад

Sorry but I bought it like that. This year and model of Veloster have this problems because it computer program is set with the air/fuel mixture to be too lean. There is a recall to change the program of the computer. I recommend to use 93 octane fuel to prevent the engine predetonation because that is what is causing the problem.