How To REMOVE CARBON Build Up From DIRECT INJECTION Engines For $12

Подписаться 403 тыс.

Просмотров 567 тыс.

50% 1

Removing carbon build up from your direct injection gasoline engine is easier than you might think! I'd always heard that you have to soda or walnut shell blast the valves after removing the intake from the engine, then go through a painstaking cleanup to remove the abrasive. I was Googling methods to remove carbon build up again this morning and came across this CRC product that works way better than I ever expected. Since we swapped the engine on the $1,500 Hyundai Veloster it's been great but there is a small shudder at idle that I couldn't fix even after replacing the plugs and swapping coils, this cleared it right up. Now it's time to do my Volt!
CRC 05319 GDI IVD Intake Valve & Turbo Cleaner: amzn.to/2ly0lOY
Check out the TMG Alpha-15 Laser Jammer System here: bit.ly/tmgJRGO
Use code WATCHJRGO for FREE SHIPPING on the A-15 dual head system!
---------------------------------------------------------------
Common Questions:
What motorcycle do I ride? A few. Ducati 1198, Honda Fury, Honda Grom, Honda Ruckus
What do I do for a living? Make RU-vid videos and work in enterprise data storage.
Can you wheelie? No, I suck.
Are you fast? Sort of. I suck mostly though.
Where can I keep up with you off the bike?
Instagram: WatchJRGo
Facebook: WatchJRGo (or JRGo, FB hates my branding)
Do you go to school? College, for 2 classes.
Why do you ride so dangerously? What do mean? I was doing 25.
Do you go to the track? Of course, hopefully there will be videos in the future.
Do you play video games? No, but I might stream N64 Goldeneye at some point. Twitch: WatchJRGo
Are you afraid the police will watch your videos and arrest you? Something something evidence something something warrants and due process of law
#DirectInjection #GDI #CarbonBuildUp

Авто/Мото

Опубликовано:

22 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 727

@tssci6774 4 года назад

Anyone performing this intake valve cleaning needs to change the their oil immediately afterwards. This process will dump a huge amount of hard abrasive carbon into your oil. No, all of won't be blow out out the exhaust. The unburned fuel, soot and carbon will be washed past your pistons rings. How do I know. I did an oil analysis before and after. Hard Particulate matter skyrocketed and I had to change the oil twice to get levels back to normal.

@kale_xo 2 года назад

I came here to say this!

@FortunateJuice 2 года назад

Anything else worth replacing at the same time as doing the GDI cleaner? PCV valve? Using a rag to hand wipe the throttle body with a little cleaner?

@joonkwon9303 Год назад

Damn you had to change the oil twice? That's crazy.

@alwayslearningthankyou2708 Год назад

The fine carbon abrasives will wear out the timing chain link pins causing slack play.

@MJ-jk9jg Год назад

@@alwayslearningthankyou2708 Also wear out rod bearings then shake the motor apart (or if you got the lemon-sensor from the recall I guess just wait 20k more miles and get a whole new engine from Hyundai lol)

@sandy7m Год назад

That loud clack noise sounded like hydraulic lock. Problem with these head clean aerosol systems is that if you put in too much fluid at one time, or the additive pools on the intake manifold, the fluid could hydraulic lock the engine. Better to do the following - Never add the fluid to an idling or stationary engine. Engine at around 2500rpm Spray the additive in short spurts with at least 30 seconds between spurts, Add the fluid at the throttle body to ensure better atomisation and even distribution (minimise chance of pooling). After half a can, wait a few minutes before resuming the remainder of the fluid. Leave the engine at the same revs for at least 3 minutes Slow to idle and leave idling for 3 minutes. You can now switch off the engine to allow the hoses at the throttle body to be reassembeled Restart the engine and slowly increase revs to 2500rpm for one minute. . Next, go on the 20 minute road run. Do not exceed 2500rpm.

@opbfitness 5 лет назад

lol...your face when you said "We just killed a rod "

@vashthestampede11 4 года назад

My car did the same thing when I started going after the heat soak for the first 500 feet or so. The car ran rough, the check engine light came on, a ton of smoke blew out the exhaust... and the engine now runs better than ever.

@robertnicholson3734 4 года назад

@@vashthestampede11 My Santa Fe did this and actually went into limp mode. I had to get to an auto parts store that had a scanner tool so I could reset the check engine light and it ran fine after that but scary as hell at first.

@vashthestampede11 4 года назад

@@robertnicholson3734 never had to reset anything. It drove really really rough for about 1/4 mile, the check engine light came on, farted out a huge cloud of dust, the engine light went away, and it's been running great ever since. I also decided to put in an oil catch can, and after 1000 miles, it's already caught about 2-3 tablespoons of oil. Might be worth looking into. I'd be happy to show you what I did.

@Jozavenue 4 года назад

@@robertnicholson3734 cars ecu will reset after the chemical is gone .No need to panic .

@hightower005 4 года назад

That engine clattered hard 🤣 that's why you use it in bursts

@franktyred9195 5 лет назад

Jacob's comments at the end were funny and spot on...got a good chuckle at his dry delivery.

@austinholbrook6378 5 лет назад

Why isn’t everyone acknowledging Gabe’s perfect 180??? That was close to perfect!

@Gabe-ABNCW3 5 лет назад

Austin Holbrook:🍻😉👍🏼

@SoSaysYou 2 года назад

Facts

@sethpoeski2954 5 лет назад

"is that Gabe?" *immediate hoon*. That was top tier.

@pacodude78 5 лет назад

lost it! lol

@Gabe-ABNCW3 5 лет назад

Seth Poe:😎🍻

@billkrause4585 4 года назад

That does make a big difference. I have my State's Emission Tested a month after I used this same product on my 02 Ford Ranger (176,000 miles). My friend John performed the PA. Emissions Testing, afterwards he commented about not believing the great results he got for such an old truck. Yeah, as you spray that product in you'll just have to manually adjust by hand the throttle RPMs, because the engine wants to shutdown if you don't. The oil will be dirty, but before the oil change try Seafoam in the oil crankcase (1 ounce per quart capacity). Drive 50 miles, then pull it in for an oil change. The Engine will purrs!

@gregoryfournerat6690 3 года назад

Just did the "non-pro" instructions on a Mazda CX-5 2013 with 107K. I had suffered thru gas smell in AC vents and saw that carbon deposits could be a possible cause. After the one hour soak, fired it up and made run to where I could let it rip. No smoke but went through a series of backfire farts. It blew that carbon out and ran perfect for my 90 mph joyride. So far gas smell gone too.

@Dennisp421 2 года назад

Gas smell might be a spark plug that's not tightened up enough. I had that issue when I changed my plugs without a torque wrench 😂

@johnfrese4851 4 года назад

i had to run that type twice in a v6 because the guy i know said he wanted to try it while using it through the port on the intake manifold. it seems like it did the trick because most of the time there is some carbon build up in the base of the intake manifold as well. it seems like it loved it to be honest to get all the crud out of the air passages thats my impression

@michelinman8592 5 лет назад

Right, thanks for the tip JR! Now I can go and fix my Hyundai. Also, Gabe's handbrake turn was on point; that just made my year! X-D

@Gabe-ABNCW3 5 лет назад

michelinman 8592: 😉🍻

@mattmarcz7574 2 года назад

Thanks Jr! I followed all your instructions and blew all the carbon out of my 2013 Veloster, really made a huge difference. My car has no more dead spots, and revs high effortlessly.

@pizzawhiskey9747 2 года назад

I have the same car and I am about to do a carbon clean

@tubbycustard8866 9 месяцев назад

did you survive@@pizzawhiskey9747

@TheSokodelic 8 месяцев назад

@@pizzawhiskey9747i hope y'all did it slow and easy. If you broke off too much at one time, a big chunk of carbon can really fuck up your engine...

@Fmandan77 5 месяцев назад

I waited until I had a noticeable miss at idle on my direct injected vehicle, which was about 170k miles. I was surprised I didn't have an issue earlier, but I run top tier gasoline, which I think helps some. I pulled my intake manifold and spent a few days soaking and cleaning the valves with a variety of methods until I was happy. A LOT of carbon build-up came off the valves. Before re-installing the intake, I installed new OEM fuel injectors and seals. Once put back together, my car idled like new again (and still does).

@shawnbeck2303 3 года назад

I put FR3 friction reducer in at my oil change. It reduced that clattering sound alot. The engine runs smooth too. $18.00 a bottle. I have the 2.0 turbo in my Escape. Shawn.

@cherosno 2 года назад

Gonna grab some of this at next oil change, thanks!

@MJ-jk9jg Год назад

LiquiMoly is the only brand I trust. I've seen tests and results with own eyes, idk about the other crap but some BMWs and MBs need that shit in there. Just make sure to get genuine stuff.

@baritone05 Год назад

I used the Lucas branded GDI and definitely had the same result. Oil usage has gotten to 1qt/500 miles with hesitation and pinging. I’ve seen some benefit but want to do it again before my next oil change.

@bigchuck333 4 года назад

Would be nice to see a before and after scope or dyno pull - some way to quantitatively measure the difference.

@zxtenn Год назад

You saved me a few minutes of typing, that would have been some REAL evidence

@MJ-jk9jg Год назад

Best they can do is vaguely following bottle instructions 🙏

@CrystalClearStudios 10 месяцев назад

you typed something anyway so you did not save anything @@zxtenn

@michael-qp9xd 8 месяцев назад

Yes i thought the same as u mention here. This video worthless as nothing learned if is for real on getting rid of carbon.

@michael-qp9xd 8 месяцев назад

U connected to brake vacuum line. Why not have more light so could see better where line is - where starts and where line ends. Very poor overall.

@mrfayetteville91 4 года назад

Just tried this with my 2012 kia 1.6 Gamma GDI stick shift and it definitely started sounding better and feeling better. It also looks like my mpgs are a lot better. I only used half a can because I was being overly cautious and was using an extendable mop handle to keep the car around 2k rpms

@mrfayetteville91 4 года назад

The car also felt like it was gonna stall at low RPMs in first while starting from a stop. Now I don't have that problem.

@NickM1013 5 лет назад

Now clean the throttle body (butterfly valve). Huge difference maker. 👍🏻

@dirtywrx8478 2 года назад

My 2018 wrx has been having a bad idle and drive. I tried this and it works. My car was smoking bad from the exhaust. Car is now smooth.

@geezavictoria7089 5 лет назад

Great video again! I’ve a Kia GT with a T GDI engine and I’m inspired to treat my car to the cleaner now .

@MuaadElSharif 4 года назад

How'd it work?

@voottrellis6403 3 года назад

did ya do it?

@1MiketheMechanic 5 лет назад

That noise was hydrolock because the way the intake sits lower than the valves and the cleaner pools in the bottom. If you could actually see the carbon coming out of the exhaust it would instantly plug the catalytic converter.

@jasonkoo5814 10 месяцев назад

Cats are cheap. Wouldn't it be better if the exhaust was removed from the cats back before using this?

@rl7880 10 месяцев назад

Cats are cheap compared to an engine rebuild, but cats are definitely NOT CHEAP. @@jasonkoo5814

@joelagrinsoni4016 6 месяцев назад

I wish you showed directly which line you pulled out, I couldn’t see which one to see where to put the spray in

@hamzalamborghini1941 Месяц назад

Exactly..that why I was here and he didn't show us

@libertatusinperpetuum2046 4 года назад

THIS WORKS! I do this every other oil change or at 10,000 miles and I have NO CARBON BUILDUP.

@jeffersonjcoat 2 месяца назад

How can you verify there is no carbon buildup ?

@jand8303 2 месяца назад

Did you physically view the valves to verify?

@jaysrt21 Месяц назад

@@jeffersonjcoatjust pop the manifold off wym

@MrJaredRich1 3 месяца назад

I ran this stuff in my 2014 VW cc 2.0t notorious for carbon buildup. With a high flow CAT I smoked out about half a mile covering 2 lanes. It was awesome. Whenever the stock exhaust was installed it never smoked

@MarioCrayola71 4 года назад

I did this on my 2017 Hyundai Sonata Sport @ 45,000 miles oli change after it started to shake lightly at idle and the throttle response was very laggy and i was getting 26 mpg with mostly i. Town and no spirited driving. After i did this CRC treatment the car made the same loud knocking noise after the treatment 3500rpm revs and after the i accelerated it on my way to the high way. Afterwards the light tremebling at idle went away and the thrittle response has improved dramatically with no lag. The best of all is, the MPGs are back to 28mpg . I will be doing this every other oil change wich is every 5k miles After

@arneybrittenham418 4 года назад

The best way to prevent the build up on intake valves is a EGR delete. Put an small airfilter on the EGR pipe and the correct pulse value compactor on the EGR harness which prevents any CL engine codes. Also a oil catch can

@Matt_from_Florida Год назад

*PCV* All those oil vapors routed back into the intake manifold lead to carbon buildup. Could route them down toward the road as cars did before emissions laws.

@davidanderson8469 Год назад

Additionally don't buy a direct injection overpriced car.

@CrystalClearStudios 10 месяцев назад

all new cars from now on will have GDI but they call it differentley for each brand so if you wanna stay away from GDI you have to stay away from cars in like 10-15 years.@@davidanderson8469

@keepingup2952 8 месяцев назад

@@davidanderson8469 Best answer. I love that Mazda6 and I want to get one, but it's GDI, GDI means *od *amned Idiots, in my book, so I can't have that Mazda6.

@Priceless406 7 месяцев назад

*guy who just bought a 2017 veloster turbo with 55k miles ha yeah i wont either @@davidanderson8469

@thelightskinliberian885 3 года назад

i did this same procedure with seafoam on my old jetta just for fun . it was so much smoke i couldnt believe it . the engine ran way smoother after that too .

@jaysrt21 10 месяцев назад

What engine was it? And what’s seafoam? I hear about it but don’t know what it is

@rudyruiz9615 4 года назад

I tried that stuff on my GDI mini cooper with the turbo, 80,000 miles and it started to run like a new car. the turbo looked awesome as well.

@josemitchell-reyes3598 2 года назад

Finally a Mini Cooper comment? Any other tips I just got mine it has 35k miles on it but just want it to run smooth with barely any worries.

@paulthompson1654 8 месяцев назад

These cans of cleaner were sprayed in my GDI vehicle 2 cans in total at 580000 miles .. AT 65,000mile the manifold was removed 1/8 inch sludge was in the manifold but it was soft . Cleaned out by hand .

@ixionn563 5 лет назад

Would this improve the performance of a 5.7 Hemi? Can I use this product?

@summushieremiasclarkson4700 6 месяцев назад

Change your oil immediately, and do an engine flush if you don't have high miles if you plan to do this. I would not recommend it at all due to the possibility of cylinder washout, but it will work. Do NOT crank your engine under any circumstances before changing the oil. Make sure your engine is hot before you start this process, as it will allow a lot of excess gas to evaporate, and also allow the fluids to flow freely.

@allseeingeyezz 14 дней назад

you have to drive it after an hour of soaking. i would wait until after burning it all out to change the oil.

@TheMaxland 2 года назад

Good tips. I have 2011 VW Tiguan and am planning to try this CRC. Question; hose from vacuum pump splits into two ways. One to motor(maybe intake manifold) and the other to Brake booster. Which one do I need to disconnect and spray this into? Planning this weekend. Can you replay please?

@DavidScheiber 5 лет назад

map/speed density controlled engines deal better with vacuum leaks as the computer can still see the change in air pressure of course a big enough one will def cause issues.

@HousesandCars 5 лет назад

I put an oil catch can on my car's PCV hose. I haven't seen much oil but the car works well with it installed. So it seems to be a good investment... it give peace of mind.

@isaacjrv 8 месяцев назад

I used to own a 1.6L 2012 Accent GDI and when I used that additive, I learned that you need to be easy once the additive is empty, don't rev it up or you will get that knocking sound, so what I did after the first time is let it to heat soak for 10 mins then start it again and let it idle for 5 mins and then take it for a spin and go very gentle otherwise the knock may come back due to the combustion chamber full of an oily substance that can cause that sound and if you are very rough increases the chances of killing the engine in the long run and around 10-15 mins of driving the product will be gone and the knocking chances are reduced, FYI, when I heard that sound, I thought that I killed the engine. Also For those who don't know in all these additives when you see white smoke is not that you are burning carbon is the actual additive mixture that makes that white smoke, once that is burned along the carbon will disappear. I have used this one seafoam as well in very clean engines and white smoke will always show up, even with intake +Carb cleaner, is like if you were burning those barbeque starting fluid, smells bad and white smoke all over. If you use that additive at home and you own a Hyundai, be patient otherwise you will pickup another engine soon. Just my opinion.

@W0LV1E45 4 года назад

How did you remove the vacuum inlet ? Mine is stuck even if I remove what holds the tube to the brake booster pipe

@martinfrog768 5 лет назад

Hey Guys ... there used to be a product called GM Top Engine Cleaner that could only be purchased at the dealer ... I had a '76 Caddilac Eldorado that I purchased from original owner back in the early 90's ... the stuff came in a 16oz can and directions were simple ... warm up engine first then slowly pour half the can in while engine is revved to about 1500 rpm then dump the rest in till engine stalls ... turn off the ignition and let the car sit for 30 minutes to an hour tops ... that car had a four bbl Rochester with massive secondaries so when I opened them up and dumped in the last half can it flooded it and stalled ... Perfect ! we took a half hour break ... after puting the air cleaner cover back on we fired it up ... big black cloud of smoke poured from the pipes as we revved it to about 2500rpm for 15 minutes ... a short run down the hiway cleaned out the rest ... when I replaced the plugs later we could see the clean tops of the pistons ... even the worn out plugs were spotless ... 5000 lb. car with 500 Cu. In. engine, 425 HP with loads of midrange torque ... could comfortably seat eight people (no tunnel, FWD) even though there were only six seatbelts ... LOL ... my friend called our throw together band which was mostly covering ZZTop and AC/DC "large Car" after it because it was a really big car ... 18' 6" long ... makes me laugh at all the fun we had ...

@joshuawarwick5175 5 лет назад

I clean my accents motor this way as well as it is GDI. I've always had my wife rev the engine but I spray the whole can in though the air intake is that the best way for most effective treatment. I usually get really get smoke show and car runs great I'm at 94k

@workingmansrestorations7071 5 лет назад

Would it work on a 96 Honda accord? I might do to my daughters car

@6atlantis 3 года назад

Don’t you have to use he brake booster line closer to the intake because the Hyundai has a check valve in the line?

@ScottJ175 5 лет назад

Thanks for the demo and reminder on necessary GDI maintenance. Bought my first one last year in my wife's 2018 Mazda 6. Have awhile before it builds up though. She's only closing on 25,000 miles.

@ddg2256 5 лет назад

If I remember correct, Mazda actually doesn't have issues with carbon buildup. Something to do with how the PCV is designed.

@heyjonnypage 5 лет назад

@@ddg2256 they run the engines hotter than most manufacturers, and the carbon has a hard time sticking to the valves at higher temps

@yosef8377 2 года назад

So you guys wouldn't recommend intake cleaner or catch can on a new mazda??

@gerardoaguilar5050 5 лет назад

What happens on these with the carbon cleaner is that when spraying into the manifold or a vacuum line, some of the cleaner tends to pool up in the intake manifold runners that aren't open (has variable intake runners, short and long for air velocity changes). When you rev it, the manifold opens the other set of runners and chugs the rest of the cleaner at once, can be bad if it's a lot of cleaner, but that's the smoke you saw. Kinda scary at first but hey, it works well.

@acethetoolman1537 4 года назад

I appreciate your video. I have this issue with my 2013 Audi A7 and still gun shy about running this product or any other solvent cleaner through the supercharged engine. Do u or anyone an opinion on that?

@Voltrondefenderoftheuniverse 3 года назад

Will this work on my 2018 Tucson gdi 1.6 turbo engine?

@RodderFiles 5 лет назад

dont think that would of worked on mine, just took the intake off the 00 exploder started squirt coolant out the back today. i had to scrape the carbon out of all the ports im pretty sure we filled the cup lots of hard chunks, 1st time i ever did upper an lower intake , gotta put back together tomor fingers crossed lol, im whipped now most the scrapage was done that or seafoam may doit good when im done, how dow you feel about seafoam?

@thrownthekilled 3 года назад

Hey how did she perform after your used this product? Like a week or 2 later?

@gloe9362 4 года назад

Started Cracking up when I saw all that smoke hit your Buddy! LOL!

@coolimpala71 5 лет назад

did work on my wife's kia soul , why engineers didn't think of that need "oil catch can" i used cleaner and incresed gas mileage was awesome, still have more to do again in 10k miles. to keep clean.

@flavoredmoney8755 Год назад

I have a 2018 sonata with 93,000km on it and was thinking of doing this soon. It's the 2.4l naturally aspirated 4 cylinder. Do you think it's a good idea?

@cumshot247 4 года назад

The brake vacuum is hard to get to, can I use the PCV hose?

@frankmontez6853 Год назад

Have rough idling runs a lil rough even on the highway. Just started to do that two days ago had it scanned at auto zone and said needed EGR valve replacement. This mechanic said it might just need a simple cleaning but it’d might need carbon cleaning at the ports. Will have it replaced but was wondering if needs a engine ports cleaned as well. This other mechanic said the EGR valve keeps it from getting carbon in there. No need to clean engine? 2015 Ford Fusion SE 2.5 L engine I think it’s GDI engine

@97I30T 5 лет назад

11:08 was absolutely hilarious. That Veloster is soooooooo fast!!

@RoyaleDistrict 5 лет назад

Would this be safe to do with the turbo version of this car? Sorry don’t know a lot about cars

@joetaylor2394 5 лет назад

Marvel Mystery Oil leaves some smoke but does the same thing plus it gives off a nice minty fragrance

@christopherlamontagne1206 5 лет назад

Good work man. I also enjoy your videos!

@sachellebabbar9005 5 лет назад

There's a lot of imaginations running wild in this video in place of an endoscope.

@dcorman 2 года назад

Would this work if you went in through the air cleaner intake?

@tommyhoneycutt-ei2ic Год назад

I did my gdi clean today in my 1.6 Rio at 38k miles after letting it sit a hour I drove it to the hwy and got on it man so much smoke came out got home no more shack when at a stop

@6atlantis Год назад

What is the adapter they make, almost looks like a cone, instead of using a paper(or nothing) towel when spraying into intake lines?

@yosef8377 2 года назад

Would you recommend this over a catch can for a 2020 mazda 6,

@RenegadeAntonio 3 месяца назад

I have a 2016, just wondering if ur veloster is still running or if it burned out of oil and got the knock

@bigjon1558 3 месяца назад

I used this CRC on my 2011 Buick Regal twice and got more smoke the second time. She still kinda hesitates when throttling up. I just sprayed it in the air intake (post the maf of course). Would spraying it in the vacuum line produce better results?

@NimrodRodriguez 3 года назад

I have a 2020 Tucson, how do I know where is that vacuum line ?

@j4s0nmuzik 5 лет назад

Would this work on a Turbo car or is it bad for the turbo?

@glenbo2464 5 лет назад

Yep , those are noisy engines but very dependable and you can rap them out a bit and still get 30+ mpg

@robivanromero1565 Год назад

Could you tell if I can do same process in a 2007 Honda civic hybrid, it is possible?

@MySpace662 Год назад

If you use good Gasoline from reputable companies like Chevron, Shell and Arco, you don't need to worry about carbon build up in GDI engines.

@paulleblanc3301 2 месяца назад

Thanks for actually posting the good and the bad well what you thought was bad

@jean230775 2 года назад

I have a 2014 Optima Turbo. I've sprayed the CRC spray through the air intake after removing the clamp holding the air filter housing. Sprayed the product as directed. Heard a 'guggling' sound after some time. Followed all instructions as directed on the can again. Nothing noticeable after starting the car after the 1 hour wait. Took it for the 10m highway ride, had some rough handling like car stalling 2 or 3 times. No real change in the car handling, no fumes or whatsoever after that. No significant change in idling behavior or change in MPG. Has anyone done this with his Optima? Feedback much appreciated.

@DustanMoore 5 лет назад

2:18 Excellent product placement

@dakeda2024 4 года назад

I get that same noise during the end of the shooting process.like knocking .. .duno wat it is . I turnnit off if i hear it continue. Do you have a clue?what do u mean by rod.

@irisbaez1972 2 года назад

Do I need to do this on my Elantra 2008 with 155 K miles? I have never done it.

@Vikturus22 4 года назад

can we use this on a pre vanos bmw M62?

@haydenuk02 5 лет назад

Keep up the great work thanks for the content

@billgarrett1673 5 лет назад

Where is it listed for sale? I might be interested.

@jas1az18 5 лет назад

Do you sell the guys on craigslist or through used car dealership?

@BigZeus 5 лет назад

This any good for non GDI cars?

@RichieRouge206 5 лет назад

I might try that on my ‘06 Volvo. We don’t have CNC in the UK but we do have Wynnes?

@chrmnxpnoy 5 лет назад

Same process on the Veloster Turbo?

@JP-uu2rw 5 лет назад

My only comment is that your results were not proven really. A borescope photo before and after of the combustion chamber to determine if in fact the treatment eliminated any measurable amount of carbon. The fact that you say it drives better is anecdotal and not measurable since what one "feels" is purely subjective. Any of those additives introduced through a vacuum line into the intake are going to create a lot of smoke and is just a by product of the chemicals being ignited and not a measure of how much "cleaning" is occurring

@socomsfinest1184 5 лет назад

Where can I find the veloster for sale at?

@navi_exl 5 лет назад

This is perfect video because my 2017 Ford Focus SEL has a 2.0L GDI 160HP engine. Ford dealership wants to charge me like 140$ here and 170$ there for the carbon build up engine cleaning service.

@djsonicc 5 лет назад

That's because this cleaner won't do a damn thing.

@TheOzthewiz 4 года назад

Yeah, $12 for the cleaner and $128 to spray it in. Sounds reasonable to me!

@jetjazz05 5 лет назад

If my calculations are correct, when this baby hits 3,500 revolutions per minute... you're gonna see some serious shit.

@dakeda2024 4 года назад

Yes Doc of course

@MegaDylan33 5 лет назад

Hey I live in Wichita KS, would you ever sell the Volt?

@adamh7378 3 года назад

Hopefully this works for me either that or a throttle body clean out.

@Cole13517 4 года назад

you might as well be the brand ambassador for o'reilys lol

@scottmason7654 3 года назад

Did you spray into the breather hose going to the intake side of the turbo? Or did you spray into the PVC hose going into the engine intake?

@jand8303 2 месяца назад

He literally said brake booster line

@ChrisBlagdonIsABoss 3 года назад

I want to use this on my corolla but i don't have a tach lmao how important is it to stay in the rev range

@MrDemonchild71 5 лет назад

How long did it blow smoke for?

@atkinsonba1775 2 года назад

is this a possible fix for 2013 GLI you think?

@siamimam2109 4 года назад

What's the update with this car? How much did you sell it for?

@eliasarruda24 5 лет назад

Patiently waiting on you to get your hands on a 2jz in the Lexus is300 or like mine, gs300😎

@ut1004bp 4 года назад

I thinking you should have done a bore scope before hand for before and after results?...Maybe you didn't need to do this at all, Have you thought about what you are breaking off and throwing into your cylinder walls? I'm wondering if you have turbo and if particals might damage the heated turbo exchange

@daveleighton4683 4 года назад

I have owned cars since the 1970's and on all the cars I've owned I have done the same thing as you using brake fluid. Rev the engine and mist it through a vacuum pipe until you see a ton of smoke out the exhaust. Switch off and leave for a couple of hours then drive as normal. There will be smoke until it burns off.

@camerond8176 4 года назад

Use water/mist and steam clean the valves and pistons does the same thing, but even better and it's free from the tap............................all the smoke in the video was pale oil, same used in Seafoam. Gives you the feeling of a good cleaning, but really nothing has been done, he'll be married to this stuff every 3-5k until he actually removes the intake and cleans it properly - If he even has the car long enough to do that.

@jaywhite1850 5 лет назад

I can see you enjoying the NASCAR Experience. My wife got it for me as a present twice. Got up to 152 and 149 at Charlotte Motor Speedway. You’d love the chance to drive one of those monsters. Maybe drop a few hints to the girlfriend.

@kuljit2306 Год назад

Got new plugs, new air filter and oil change, so i put premium fuel and added a cleaner to the fuel. Now rpm has been limited to 2000. Engine light blinking. idk if this is connected but will be using the spray soon.

@dhues9747 3 года назад

If I were to use this on my 2000 Honda Accord V6 would it potentially solve the idle/stall problems? I recently replace the idle air control valve which was nice for a second but then went again. I’m hoping this might clear things up for it. Thank you

@myya8370 3 года назад

It definitely could. When there isn’t as much air intake due to the carbon deposit build on the intake valves, that can be a cause to idle/stall issues. Also, cleaning the MAPS or MAFS of your vehicle can help as well possibly 🌞

@greathornedowl3644 4 года назад

How long do you have to drive around before Jake appears? Then how long do you have to drive around for him to disappear?

@wefixit5906 4 года назад

does check engine light coming?

@radulescu21 4 года назад

You did not blow anything out, the smoke is simply the stuff you put in being burned by the engine. The knock also sounded more like pre-ignition, from that stuff being in the cilinders.