How to fix Cab Corners GMC Sierra Chevrolet Silverado

Подписаться 6 тыс.

Просмотров 44 тыс.

50% 1

A quick video detailing how I (a guy with average shop skills) replaced my rusted out cab corners on my "Trusty Rusty" 2005 GMC Sierra Z71 (without removing the bed). Slip on method.
Products I used...
Cab Corners amzn.to/3a5Uk2d
Panel Bond amzn.to/3wP6iHm
(Affiliate links) As an Amazon Affiliate I earn commissions from my links these small commissions help me to produce the helpful content on my channel
Video on rocker panels: • How to fix rocker pane...
If you found this video helpful and would like to show your appreciation hit the ($Thanks) button to leave a tip! :)

Опубликовано:

12 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 44

@hellomyson6886 Год назад

Thank you for being one of the very few RU-vidrs that get straight to the freaking point

@hemlocktree1 6 месяцев назад

Thanks for the concise and simple video. A lot of folks on Yuo Tube University want to include a lot of blah blah blah that just makes me fast forward through. One idea, one product reccomendation. I am going to cut a strip off the cab corner replacement and epoxy it on the inside lapping over the cut edge on the truck. That will give me someting to bond to on the top edge of the replacement. 3M Panel Bond has glass beads so you can't squeeze out too much. Also come in small sizes so you don't have to buy $120 worth of epoxy.

@peterhammond2704 4 месяца назад

I just got an 05 Sierra and this is what I’m going to do. Thank you!

@bikermike 4 месяца назад

Glad this gave you some ideas, cheap and simple for an older truck repair!

@hancockbrewer1465 2 года назад

Thank you. That’s what I needed a diy that ain’t gotta be perfect.

@bikermike 2 года назад

Exactly my intentions for a 17 year old truck! 👍

@odelldickey2218 Год назад

Thank you for your time in making this video . Good helpful information.

@4dirt2racer0 Год назад

if ur doing this repair, beat everything with a hammer to get the rust broke free before u waste any wire wheel or time on it i even use screwdrivers to get back in hard to get to areas

@Stoneyx420 3 года назад

nice video man just a tip if you grind away the paint on the truck where you want to weld it wont burn the paint and let off toxic fumes and also gives you a more cleaner and stronger welds

@bikermike 3 года назад

Thanks! It's just a 17 year old rust buggy repair though.. Not the STS 135 ;)

@Stoneyx420 3 года назад

Just looking out for your health safety third!! We don't need ya getting sick on us you need to put out more sweet videos

@llelewwewe6663 3 года назад

I like this way looks fairly quick and easy. Just the glue at the back and bottom? If you have to do corners and rockers what would you do first?

@bikermike 3 года назад

I would do rockers first but it probably doesn’t matter too much. I welded in my rockers though. Panel bond likley do the job too if have enough good metal for it to bond to. Just screw it in place while it adheres.