How to fix FLO problems (and other hot tub things)

Подписаться 139

Просмотров 64 тыс.

0% 0

The flow problem is happening because water is literally not flowing through the pipe. You probably see a "FLO" error code on your hot tub panel/display. It could be lots of different things, and I go through them in this video.
I made this video for the next poor soul who is trying to learn everything there is to know about their hot tub. I have an "Adventure Hot Tub" by L.A. Spas. More importantly, the control board is a Gecko IN.XE-5-11-H4.0.

Игры

Опубликовано:

7 июн 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@petetmn2053 7 дней назад

You gave more information on these silly packs over any dealer or tech online.

@alanstendal2962 2 года назад

Thank you for taking the time to document your repair. I learned a lot from it.

@toddalexander2354 Год назад

Thanks! I replaced the pack, but it was set for a spa with a circ. pump, and I didn't have one. I was able to program in the correct LL3 and it worked fine.

@walkjw44 4 года назад

Your video was very helpful. Holding down the pump button for 30 seconds then pressing the light button reset my spa, same control panel as you have. Thank you!

@rshillington 4 года назад

Glad it helped! Thank you for letting me know.

@ChauLy703 2 года назад

Thanks!! I have a diff control panel but I managed to change the LL code from 4 to 5, then set it back to 4. It fixed the heating issue I had.

@sethscofield 2 года назад

how did you change the LL code?

@rshillington Год назад

@@sethscofield That's explained in this video. Basically hold the Pump 1 button down for 30 seconds.

@zeropointzeroband 4 года назад

Thank You!

@1Patient 2 года назад

😃 <a href="#" class="seekto" data-time="591">9:51</a> Neighbor's Yard 😃

@patrickdubeau7131 2 года назад

Hi Ryan, Thanks for all your tips! I wonder if you can help? I had a tree that fell on my electrique lign and broke it...so since that event, my spa won't start! Like there's no électricity at all. I checked the fuses wich seems ok, all breakers on and the spa technicians are way expensive here in Québec. Do you have any tips?

@rshillington Год назад

If there's no electricity at all (use a voltmeter to check the incoming lines) then you need to trace back the power line. There's likely an on/off breaker for your hot tub that's nearby. If there's power coming in but the control panel isn't registering anything, then you're probably best getting a new control board.

@titoforsythe1033 3 года назад

Every once in awhile I go out to my tub and the jets that are suppose to always be running, pushing flow towards my filters, are not running. I turn off the power and they start up again. I read that they are alway suppose to be running. What would cause this, it’s not my filters I took them out and replaced them

@rshillington 3 года назад

No motor should ever be running all the time, 24 hours a day. It's neither economical nor good for the motor.

@charlesbakes2855 2 года назад

Where pump one is plugged into the Orange connector. How do you remove the plug I cannot get it out of the Orange connector?

@rshillington Год назад

Press down the tab at the top and wiggle it free.

@tomskerven5375 2 года назад

How do you know which LL program to run? I have changed my heater because of FLO code. Still same problem. Iam wondering if it's the LL program. I had it on 1. Pump 1 wouldn't turn off. I now have it on 4 now I can individually turn on and off each pump.

@rshillington Год назад

There's a piece of paper that comes with your pump that explains what the different LL values are. Watch out! They're different even for the same model but different software versions they've loaded on the control board.

@kennedymiller3627 Год назад

Wrench symbol and 3 dotted lines flashing in right top corner??? Same control panel same hot tub

@katrinadillard7282 3 года назад

I drained and cleaned my hot tub and everything worked fine. 2 days later I get the flo error and only one side of hot tub is working. Any suggestions?

@1Patient 2 года назад

Replace Flo Sensor and remove all air from the system...bleed the system

@rshillington Год назад

@@1Patient Yup. This! See the part about the red hoses that help bleed the system.