Тёмный

HOW TO FIX GARAGE DOOR FROM BENDING 

TRUSTMAN
Подписаться 9 тыс.
Просмотров 20 тыс.
50% 1

HOW TO FIX GARAGE DOOR FROM BENDING.
amzn.to/40JDui7
Other place you can order these support brackets is Amazon. Click on the link for the 16ft.
For the 8ft Support Bracket
amzn.to/3UcG0e6
Adjustable Support Pole
amzn.to/43Av8dO
In this highly informative video titled "HOW TO FIX GARAGE DOOR FROM BENDING," the expert addresses the common issue of a bent garage door, which can lead to poor performance and even safety concerns. The video begins with a comprehensive explanation of the factors that contribute to garage doors bending over time, such as poor maintenance, weather conditions, and accidental damage. The host emphasizes the importance of addressing these issues promptly to prevent further damage and ensure the longevity of your garage door.
The second segment of the video delves deeper into practical solutions for garage door bending. Our knowledgeable host demonstrates step-by-step techniques for identifying and rectifying the problem areas, which include reinforcing the door panels, adjusting the tension in the springs, and even replacing damaged components. Throughout the tutorial, the presenter emphasizes the importance of taking necessary safety precautions and seeking professional help when needed. By the end of the video, viewers are equipped with a thorough understanding of how to prevent and fix garage door bending, ensuring a functional and secure garage door for years to come.

Кино

Опубликовано:

 

24 июл 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 33   
@gonzo3618
@gonzo3618 Год назад
Good job , Thanks for the tip.👍
@heroknaderi
@heroknaderi 2 года назад
Very Helpful thanks.
@TRUSTMEN
@TRUSTMEN 2 года назад
Glad it help you out.
@heroknaderi
@heroknaderi 2 года назад
@@TRUSTMEN and if you’re interested in watching one of my videos here’s one I maderu-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-a_EXVxgo44g.html
@livyninja1015
@livyninja1015 2 года назад
Hello my friend I have some questions…my garage door look it same problem your garage door but my they at first rail Bottom..so how you order rail we need to make sure with and how many rail I need order right thank you for your help
@TRUSTMEN
@TRUSTMEN 2 года назад
What do you mean they at first rail bottom? On how many U-Bar Strut you will need. You will have to check to see where your garage door is bending. I would say one on each end of your garage door panels where its bending. You can measure your garage door to get the correct length bar for the door.
@RonMiki8
@RonMiki8 Год назад
I don't have a menards here in California. Home depot doesn't carry this either. Do you know where I can buy support bracket?
@TRUSTMEN
@TRUSTMEN Год назад
Only other place would be amazon but it cost more. Here is a link amzn.to/40JDui7
@gregd2spam
@gregd2spam Год назад
2:37 black and chrome spacer tool like the opposite of a bar clamp - what is that called and do u recall where you bought that?
@TRUSTMEN
@TRUSTMEN Год назад
Check out my video description. I added a link to a similar item.
@langanyu1476
@langanyu1476 2 года назад
Where did you find that reinforcement mental rod? I don’t see them in home depot or Lowe’s
@TRUSTMEN
@TRUSTMEN 2 года назад
Menards
@TRUSTMEN
@TRUSTMEN 2 года назад
www.menards.com/main/hardware/garage-door-parts-accessories/ideal-door-reg-overhead-garage-door-steel-horizontal-garage-door-support-struts/0150091/p-1245710551940459.htm
@ohioguy4326
@ohioguy4326 Год назад
Can I take this off my lower panel and move to the second panel down? My car is long and this is super close to taking out my paint job on the back of the car.
@TRUSTMEN
@TRUSTMEN Год назад
I don't think you should take off the one that is on the bottom panel because that panel may start bending.
@dannychan4625
@dannychan4625 Год назад
Did you have to adjust the springs or tension on the garage door with the new beam? I would think the garage door would be heavier now with the extra weight and would be harder on the motor
@TRUSTMEN
@TRUSTMEN Год назад
No, I did not need to adjust tension or anything. If you already have the correct tension on the door, it should slide up and down easily. A 1/2-horsepower garage door opener can lift approximately 300 pounds. The beams are so light that the garage motor will have no problem lifting up the door. 16.6 pounds wouldn't make a difference.
@bluev3nom
@bluev3nom Год назад
i ADDED mine and it stops about a foot from the floor. My garage door is straight now and it hits the little flapper on the way down that I think stops the garage door. It is either that or I need to adjust the down turn . What do you think? I wish I could show you via video real quick what it is doing. The middle of the garage door hits that sensory flapper. If i bring that sensor flapper back too much it will become aan issue from the garage door stopping at all.
@livyninja1015
@livyninja1015 2 года назад
Can you let me know web site I want order I living United States…my garage door width 192 inch…because I saw they bent from bottom rail and second rail…after they closing shaking and open too on the first panel….thank you for help man…
@TRUSTMEN
@TRUSTMEN 2 года назад
The link to buy is in the video description. I got my from Menard.
@livyninja1015
@livyninja1015 2 года назад
They not shipped to my location man do you another website I need help buddy thanks
@andy_o6133
@andy_o6133 2 года назад
the link shows that the price is 60 bucks plus? did they put the price up?
@TRUSTMEN
@TRUSTMEN 2 года назад
Thats Inflation for you.
@leynardryancariaso5445
@leynardryancariaso5445 3 года назад
Where you buy it?
@TRUSTMEN
@TRUSTMEN 2 года назад
i have added the link to the item
@migoalaso
@migoalaso 2 года назад
Where you two top panels bending or just the top?
@TRUSTMEN
@TRUSTMEN 2 года назад
Just the top. The lower one was already there.
@leynardryancariaso5445
@leynardryancariaso5445 3 года назад
Please give me info where to buy it?
@TRUSTMEN
@TRUSTMEN 3 года назад
Menard website
@TRUSTMEN
@TRUSTMEN 3 года назад
www.menards.com/main/hardware/garage-door-parts-accessories/ideal-door-reg-overhead-garage-door-steel-horizontal-garage-door-support-struts/0150091/p-1245710551940459.htm
@roger2276
@roger2276 Год назад
66 bucks now but still decent price
@roger2276
@roger2276 Год назад
I live in Arizona so we don't have a Menards .. I got mine for like 100 bucks from a garage door company it's one piece and my door is perfect! No pops or bending sounds
Далее
Garage door buckled bent broke - DIY fix
7:46
Просмотров 232 тыс.
Installing a 3 piece garage door strut kit
6:45
Просмотров 9 тыс.
Fix A Sagging Or Bowing Garage Door
4:56
Просмотров 30 тыс.
The Easiest Practical Inventions of the Year
12:40
Просмотров 23 тыс.
Top Garage Panel Bent DIY Fix
3:40
Просмотров 50 тыс.
Заячий Стон - Рот пятничный
0:55