Click HERE for the OBDLink MX+ OBD2 Bluetooth Scanner for iPhone, Android, and Windows amzn.to/3eNa4cF Click HERE for the AlfaOBD APP amzn.to/3JHh495 Click HERE for the Security Bypass Module for 2018+ Vehicles amzn.to/3tbciwR
I found this guy from upgrading/customizing my RAM. Been a fan since......Even liked the Dak until he went HEMI on me lol. Only Jelly cause my Dur N Go is still Magnum. I have enough HEMI products and too much invested in my 408 Mag.
Really appreciate what I've learned from your videos. I've been getting a 'rear brake light' out error message for a while and this should fix it. Thank you
Very informative video! Question I have a 2019 ram 1500 (5th gen) halogen package I updated my tail lights for alpharex and they didn't work do you think this can be a solution? Thanks
2012 is different. Look up door lamp and select Puddle Lamps. It wasn't the easiest to find, but it worked! Some features are just slightly different on different years. Glad I waited until today instead of last night at 2 AM when I wanted to! Got my mirror signals figured out and this. These stay on for a few seconds less than the dome light. My biggest goals for today! Now I only need my fog lights installed. I'd also like to figure out how to add interior lights so I have more than one tiny light. I have some USB ones from Govee, but I'd like something better and simpler.
Purchased a 2014 RAM that had LED rear lights. Before I purchased it it was throwing the 'parking light out' message while the lights were on and I used the left turn signal or break. I discovered that the resistor pack on the driver side was bad, I had no reading with my multi-meter. I replaced the rear lights with LED lights and now it gives me the same message for left & right turn signal as well as breaks. I like the video showing how easy it is to get into the system and change the settings, I'm sure it'll save me money in the long run over going to the dealer and having them look into it. Thanks for the information, I'm going to look into getting the OBDlink as well as the program.
I'm wondering the same thing. Can you turn the message off if all lights are working but still getting the error?@@nicholasvutsinas7386 @BoostedMotorsports
Hi friend After I was trying to put LES on my 2015 ram 1500 they don’t work and I put everything back with factory bulb now there is no power on my passenger side headlight and signal light I went crazy trying to find out what is causing the problem I saw something on line about the TIPM problems especially on the 2015 year Chrysler product Do you think that’s what happened ?Do I have another choice or definitely I need a to change that whole $400.00 TIPM? Thanks for all your videos and be waiting for your reply
Enjoyed your video on Led fix. Couple questions. I just put in led headlights and tail lights on my 2004 Dodge Ram 1500 Will this set up work with them.
I swapped out some LED and I am getting some codes now so i have purchased the scanner and a tablet to try this and see if it fixes it. Hope the app works as i am from canada, sometimes the stores are different. I do have a few questions. If I plan on changing some things out to LED in the future can I make the setting change right away or will that cause issues changing the tail lights for example from No to Yes in the app but I didn't swat out the bulbs yet? My next question is, can you get to all of these settigns with the free/demo or did you have to purchase the subscription to unlock these features?
Awesome video, thank you so much! Quick question, I do own a RAM 1500 with quad lights, do I still need a decoder if I decide go down to the alfaobd route?
You'll want to enable Veh config 3 high intensity discharge lights regardless of whether you are using led/hids. Also you should add to these videos to do a initial bcm backup so if something goes wrong you'll have a copy of the original configuration
Wow, thank you! This is the setting I was missing, for over a year if it got below 55°f my right headlight would go out. Changed this setting and the issue is gone now.
will this only work with the obdlink mx+ ? I have a different obd bluetooth that was used on my audi. Im wondering if i can use it or do i need to buy this specific one?
Hi, using your steps i was able to fix all the errors other than parking light error. All 4 corners parking lights give error every time i hit breaks or give the indicator to turn left or right. I made sure settings for these lamps are set to yes for leds. Any suggestion.
I upgraded from non power folding regular mirrors without the lights on them to power folding tow mirrors ( got door models from a different truck to get them to work) but now I get the turn signal light out message and it flashes fast on the dash but the only light that flashes fast is the light on the mirror…. Also the puddle lights don’t work not as important to me…Would love any advice to try to fix this if you know would be much appreciated
Great video like all ways. Love watching them. Would like to see more videos on the alfaobd for the ram. Are there other mods with alfaobd? Anything to unlock features on the radio? Anything to bump up the panel response to reduce the throttle response? Seen one for tire size change. Anything to get you some more views. Keep up the good work!
Throttle response is controlled by the PCM programming so you can't change that with alfa but you can enable/disable all kinds of features and do most dealer level programming with this 👍
Parking light out message. I use the obd change the settings but still showing error message when driving the highway. Any help would be greatly appreciated.
Is there an equivalent of that works for iOS that does the same thing for the headlights? Also, is there another security bypass we can get because the one you linked is unavailable?
I’m having parking light out error on my 2018 Ram 1500 limited cause I swap to marimoto xb taillight and they are all led but my stock lights were led in the top part and bulb in the bottom! Please advise! Thanks
Ok, do you know where to get a bypass that works with Ram? I have a 2019 1500 Classic and am already in for $250 just to change Tail lights to LED. Unfortunately AlfaOBD won't refund me so no matter what I lose $50 even if I return the OBDLink MX+
@@BoostedMotorsports Thanks, just got mine delivered today. Do you know the location of the security gateway module on a 2019 Ram Classic? I haven't been able to find mine.
So I just followed all the steps including using the bypass because mine is a 2018 Ram 1500 and even after letting it sit for hrs, it still gives me the error message “parking light out” only when the headlights are on and I use the turn signals. Any ideas?
I have a 2014 ram 2500 I messed with my car configuration when I bought it someone had led lights in it but I took the aftermarket lights out and messed with my settings cant get it back to factory settings. It hyperflash only when the headlights are on but when the headlights are off it corrects itself and I also have a park light off even with the lights out any suggestions?
Will this work for HID bulbs as well? I have the HID and resistor kits you recommended and have been getting "low beam light out" messages in the past couple of months, even tho every other light on my truck has been converted to LED but those never give me a "lamp out" message. And if this works, can I take the resistors off of the HID kit? Thanks in advance, love your channel!
Yes it will. Couple steps to do it but I can make a separate video for that! There is another comment here in the comments that talks about it as well!
Hey bud can you PLEASE HELP ME?? I bought a used 2014 ram 1500 hemi not knowing it had leds for low beams and fog lamps. But here's the problem.. my passenger side headlamp globe had condensation. So I took it out. Cleared the condensation. Plugged it back in and mounted it. After that I had no power to my low beam and when I turn my blinker on . My low beam. Blinks like the blinker now. I'm tight on money and don't know what to do. If I purchased this obd reader do you think it would solve my problem?
I had a very similar issue just from changing the halogen house into an LED housing. No no marker white marker my position right turn signal flasher is the Hy-Vee and I have no highway more movie just on the passenger side. Still trying to figure it out…..
MY 2015 Ram Laramie Longhorn 5.7 V8 will not allow the LED lights to work on the low beam They come on but go out after about 5 minutes High beam works great Do the LED bulbs pull too much power? Is there a fix?
Hey boosted. Do you know if there is a way that make the car starter last longer? After hitting car starter, it turn off within 10-15 mins. Is there a way to make it longer?
Fixed my 2015 RAM 5.7 after I added LEDs all around my truck. Lasfit brand from Amazon (high, low beams, fog, front turn/running, tail/brake, reverse, 3rd brake, dome, license plate) ALL reset inside with the OBD MX+... I'll give an update if something happens...
my blinker error on cluster pops up , even though i had morimoto a in for the last 4 yrs. just confused why it shows on dash saying left/right blinker error?
It doesn’t always work!! I have a 2015 Ram 1500 slt and I charge all lights to led and did the settings and still rear blinkers hyper flash but it doesn’t give me error on them! And I installed flash backs on the front they work fine but it gives me error message so maybe the app is not as good as many say or the truck system is not accepting those changes??? Can someone PLEASE HELP???
You can go 2ways on this 1 you can use resistors and canbus modules like i did before i bought AlphaOBD MX+ or use AlphaOBD MX+ to change the settings and not have to buy any resistors or canbus modules
I have a 2015 dodge ram and high beams are hooked up and work great no issues at all but my low beam lights will not work without flickering then stop working completely even with canbus hooked up
Hey, so I finally purchased the app $50 as well as an android $60 tablet and the OBD $120 scanner still cheaper than going to the dealership by far plus and can do cool things with it but after doing everything the flickering stopped and the lights look great both front and rear LEDs but the only issue I’m having is that I can’t get the Left turn signal and right turn signal out warning lights to turn off anyone have any suggestions? I have resistors handy but am wondering if anyone can get those warning lights out without having to cut into the lights
Question? If you already have all LED'S upgrades with all the resistors and canbus modules if you do this with AlphaOBD can i remove all the resistors and canbus modules once i do the setting changes ?
@John Vigliotti i used AlphaOBD MX+ to change my factory settings from Holengen to LED's a few days before i received my Alpharex Pro G2 headlights i had no issues so far i removed all my canbus modules and resistors from the previous LED's setup so far no issues as of yet
@John Vigliotti i didn't but once i used AlphaOBD mx+ and changed my stock holengen to LED's i removed the canbus modules and resistors had zero issues so far
I have a 2013 ram 1500 v6. I swapped out all my bulbs for led and had no issues except for my rear turn signals say bulb out when the headlights are on. I can’t find any Alfa obd setting that would change this. Any ideas? If so I’ll give you my email
From the Alfa website "AlfaOBD is a software for the diagnostics of the vehicles produced by Fiat Chrysler Automobiles (FCA) group. 1994-2021 Fiat / Alfa Romeo / Lancia cars, and 2005-2021 Chrysler / Dodge / Ram / Jeep cars are supported."
I have a 15 ram. Dealership said they can make the computer to where it allows LED but told me that the pcm doesn't put enough output power to power up LEDs. Can anyone verify this is a fix for the 2015 year model? I purchased morimotos full healifjt assembly. Works for about 15 minutes before cutting off.
I have a 2016 Ram 1500 that I replaced all lights except front turn signal bulbs with LED and I keep getting " parking light out " on my display. What is wrong?
Same here, actually i had them already changed an all working, just swapped for different led bulbs and those started giving me message and they blink fast, i restarted already truck several times, checked status, it has single setting for both L and R front park lamps and another for both front turn lamps they both confirm set yes to LED, but problem remains... this happened to me before and i don't know what i did, i think it eventually started working on it's own Update: i went play with that more, the leds i changed were front turn signals, so i switched in alfaObd leds to NO, about 5 minutes later back to YES, it didn't resolve the issue... but i noticed it's little more strange, yes the message appear on evic that front turns are out, but they actually blink normal speed outside, the only fast speed is mirror turn signals and dash arrows, everything else is normal speed, i'm clueless
You know that would have been a great excuse to swap to LED reverse lights. 🤣🤣🤣 Thanks for the tech tips. Got to order a bt dongle now. Do you have the free version or the full version?
Might have to soon! One of my factory oem led tails is burnt out though which is a bummer so I havent decided if I'll be just replacing the broken one or upgrading both to something else
From the Alfa website "AlfaOBD is a software for the diagnostics of the vehicles produced by Fiat Chrysler Automobiles (FCA) group. 1994-2021 Fiat / Alfa Romeo / Lancia cars, and 2005-2021 Chrysler / Dodge / Ram / Jeep cars are supported."
Me too. I just followed all the steps in the video mine is a 2018 so I used the bypass and set it all to LEDs and even set headlamps to HID and I let it sit for hrs and only when the headlights are on and I use the turn signals I get the “parking light out” message and I don’t know why. I was getting the same message before and it’s still showing up even after the adjustment. So I don’t know 🤷🏻♂️
@@alexlubbe I just took out the LED's in the tail lights and put originals back in and it went away. My concern were the headlights, because I live in the country.
