Sprinter NO START error repair karmanauto.com/product/merced...
Sprinter Stuff amzn.to/3MU0Wnb
In this How to Fix Mercedes Sprinter Start Error - Dodge Sprinter Start Error Repair. I will show how the repair is done and what tools are needed for this no start repair. If you don't have the tools you can have this service done link here www.karmanauto.com
Mercedes Sprinter 'START ERROR' repair service for the following years / models / series: 2001-2006 / T1N W901 / Mercedes Sprinter (Dodge Freightliner) 2500 3500 / L5-2.7L DSL Turbo OM612 and OM647 (CR3), with TEMIC immobilizer system. TEMIC immobilizer system was used on 2001-2006 / T1N W901 / Mercedes Sprinter (Dodge Freightliner) 2500 3500. Common issues are: no start, START ERROR on dash.
This, START ERROR repair service will test and synchronize keys, WSP (SKREEM) and ECM. All codes and immobilizer counters cleared. The items will be Plug n' Drive and will require no additional programming. Old keys will work. Simply install the the WSP (SKREEM) and ECM, and start the car.
Mercedes Start error on your Sprinter can happen whilst trying to jump start you van.
We can repair this Mercedes Sprinter start error and get your vehicle working again.
All your vehicle data will remain the same like the Vin, mileage and other factors.
ECU (normally mounted behind/underneath the glove compartment) Must be CR1 , CR2 or CR3 as show in the video
WSP (clamped to the back of the instrument cluster)
Whilst you are sending in your components you might consider having your vehicle remapped and get a spare key
It is important that you remove the key before attempting to remove any components ! It is advisable to disconnect the battery when removing or re-fitting the components. It is important that you have two +12V supplies to your WSP please check as in the diagram below before sending. Contact us if you do not have the supplied there.
Pin 3 is battery +12V , Red/Yellow Wire
Pin 7 is ignition +12V, Black /Yellow Wire
14 мар 2022
