How to Fix: Mouse Double Click Problem 

*Ok. I tried this, successfully.* I have to say, those components are smaller than I thought and I had to use some additional light source and even my phone's macro lens (plus zoom) to be able to see it correctly. As you say, arching the "H" on the plate is enough to give more tension to the spring (the "U" from beneath is the actual spring but arching the H is way easier and safer) This gives more resistance to the click but you will get use to it fairly quick. The intervention was safe. There's barely any risk of damaging components, just be careful when prying open the switch casing. After the procedure I put everything back on its place, put the same gliders on and we are rolling. Advices: - Take a moment to clean your mouse as it's probably full of dead skin, dust and hairs. - Take pictures of your progress in case you need to take a step back or don't remember the case or spring plate orientation.

Ojalá hubiera encontrado este vídeo antes, cuando mi g300s empezó a fallar pensé en comprar otro pero este modelo había duplicado su precio así que compré un mouse onikuma de calidad inferior, después de un año el onikuma empezó a fallar también así que decidí tratar de reparar el g300s y este vídeo fué de mucha utilidad, ahora puedo usar mi mouse de nuevo, muchas gracias!!

Just tried your method and it's working well now. Thank you :) by the way, for whoever is gonna try fixing it, you should have a really small screwdriver. I couldn't at home so I opened screws with a knife. If you haven't done it before I'm son recommending. and the metal part is really small so careful :) thank you for the video

Yes can confirmed it worked, but not without pain. Do not pull the metal tab too much or it can be released accidentally from the trap and wasted hours putting it back. Opening and putting back the plastic casing is also painful in this model. Had I known the amount of blood and sweat and time needed to fix the double click issue, I would have just simply order a bunch of $10-20 (hopefully non-omron switch) mice and move on with life.

Excellent tutorial! Really, thank you very much! 💯 Unfortunately, the switch on the Redragon Cobra-chroma M711 mouse cannot be opened. They even look a little different. Most likely; it can only be fixed by desoldering and replacing it. The only thing I could do was spray it with some electronic cleaning oil [Silijet E-plus]. I don't think it will work; but it was the only thing I could do. If it doesn't work with the cleaning oil; I don't know how convenient it would be to change the switch since the mouse cost me $600 MXN [$30 USD]. - Ramón 🇲🇽

You saved my life, thank you, now the left clic is working perfectly, for the people looking in comments, you have to use a really small screwdriver to lift the metal part that closes the circuit, I personally used the Truper JOY-32, and other recommendation is to not lift so much the circuit plate because the laser might fall off. Salvaste mi vida, gracias, ahora el clic derecho esta trabajando perfectamente, para las personas leyendo los comentarios, tienen que usar un desarmador muy pequeño para levantar la parte de metal que cierra el circuito, yo personalmente usé el Truper JOY-32, y otra recomendación es no levantar mucho la placa de circuitos porque el laser se puede caer.

Bought omron d2fc K 50m, switch that's rated for 5x the one it came with, for less than 1.5 usd for 2, desoldered and swap both left and right click. The best thing about swapping the switch yourself is, the experience and confidence you get to repair your own thing for other product.

Thank you! It helped. It it reduced around 85% double clicks(probably could have done better but oh well good enough). I did lose the white thingy when it popped open but I found in the end😁.

thanks now my mouse is working again thank you thank you thank you best of best azbest

Worked like a charm. Thank you very much.

G102 try this and success thank man

Thx, it works on Logi G603

its working now! thanks

this method did work incredibly.. but I'm not as delicate as you, So the thin metal thingy flew off of its' place. I manage to put it back in, the mouse works great, but now it silent 😅😅😅😅😅😅😅😅

I took small piece of paper and put few drops of isopropyl alcohol on it and squize it between joints when they were closed and move it few times, that cleaned and degreased surfaces, seemd worked for me perfectly

It appears that Logitech put the mouse switches right below the mouse buttons, where you can't reach them in the G305. But your video was informative nonetheless.

exactly my issue and after fix it looks ok, thanks man!

the spring jumped out, I spent 1 hour to fix it, and finally I did it 😆

Thanks! it helped..i'm using razer abyssus~

I did exactly what you show, with the same mouse, and now it's worse than ever. I have 95% times double click when I click once, while it was maybe 25% before. It's time to buy a new one I guess.

Great job thank you. Keep it up

2 años de uso y me paso lo mismo. Lo arreglé ya volvio a pasar al poco tiempo. Nosé si es buena idea volver a comprar el mismo le tomé mucho cariño :/

I opened mine and discovered that it was broken, sad day...

it workssss , thank you 🥰

Grear video, really helpful, thanks a lot. Cheers.