Thank you for sharing this knowledge. I have a TV that is stuck on the Sharp logo and have tried the hard resets and whatnots. I have not tried the firmware update yet. I was wondering where I would be able to get a copy of the firmware. I have looked around and have been unsuccessful looking for this. The model of TV I have is LC-65LE654U.
Thank you for posting this video. I have a PN-LE701 Sharp TV that has the frozen/stuck SHARP logo when powered on. I've tried formatting my 4GB flash drive, adding the firmware update, and get the TV to start the update/install. It powers off & back on, but never breaks out of the frozen/stuck logo issue. Any advice would be greatly appreciated!
Have a 65 inch sharp tv . With no remote . Can get it to power on with button . And when it powers on cant get the buttons to do anything else . Have screen and it searches for internet ?
FIX] Sharp LC-65LE645U Stuck on Sharp Screen I just wanted to create a post in case some one comes into the same situation I did. Backstory: Went to update the firmware on the Sharp LC-65LE645U and the TV froze for an hour. Ended up unplugging it and replugging it in and it only showed the Sharp screen. So I tried to do the whole factory reset and held the input and volume down buttons at the same time and plugged the TV in, but instead of getting the little K on the screen I got the Sharp logo. I tried looking up the firmware on the Sharp support site but there was none. So I called Sharp support line and they said since the firmware was not available I had to call a TV repairman to get it fixed. The TV repairman wanted $90 just to come over and was telling me it will probably be the main board on the TV that needs to be replaced which costs like $200 without the labor. So I decided not to have them come out and did a little digging. The fix: So I found another Sharp TV that had the same specs and everything and the model was similar. It was the Sharp LC-65LE654U model. I downloaded the firmware on the computer and extracted the zip file using 7zip (you can also use WinRar) and changed the name to "install.img" (no quotation marks). I then formatted the flash drive on my computer to FAT32 and copied the file over. I unplugged the TV and inserted the flash drive into the USB slot on the side of the TV and plugged the TV in. The firmware started to install and the TV is working again. *I also wanted to note that I came across the same solution while digging 20+ pages in Google on a random forum. So props to that user for confirming my thought process. I came to this subreddit earlier looking for some sort of fix and came across nothing, so I wanted to post this just in case someone gets themselves in the same situation I was in. UPDATE 1/18/2021: I have gotten message from several people since this post. I believe Sharp has removed the software from their website. I still have it and the link for it is here. I hope this helps. TV is still working and we use it everyday!
I have the lc-65le654u and having the same issues. I have tried the USB thing but I think I'm doing it wrong. I'm using a 32 gig flash drive. Is that too big of a flash drive? And do I need to rename the file? I use to be good at doing this but guess getting older has dulled my computer sense lol.
It worked! Thank you a million!!!! It did not work the first 3x. 3rd attempt I unplugged the television held the power button down for 30 seconds to drain all the power….then the screen was just black. 4x I unplugged the television removed the usb drive and tried again. Miraculously the television started updating the firmware. I was in complete disbelief. Television is working like normal.
I have the Sharp LC-65LE645U 65" TV. I can turn it on (via remote or backside of TV), "Sharp" logo displays continuously. No functions work; I must unplug TV to stop frozen logo display. I downloaded a firmware version to a FAT32 formated USB drive but I can't get beyond the Logo screen to try to refresh the firmware. I've tried unplugged for 10+ minutes, and various combinations of button presses whilst powering on.... still no joy. 😢 Any advice...? Thank you
Hi !e I have a Sharp 55 stuck on the logo. i get the firmware but didnt want to do nothing . its constantly up the logo, didnt restart the tv. any idea are welcome
Hi, Any idea what two slow blinks means on LC-60LE636E? Psu seems to have all the right voltages except backlight and only turns on for about 30sec without any picture
Hello, there! Same issue here for our Sharp LC-32LE375X. Do you happen to know where we could download its software to resolve this issue? Any help for this is highly appreciated.
Roku uses different model and serial numbers than Sharp. You can only get them if you can turn on your tv. Changed all boards still didn't fix the endless loop after factory reset. Sharp and Roku refused to help..both websites have the firmwares for other model but not my 1 year old LC 58G7370U Sharp Roku TV. I can pay you if you can give me the firmware file
great video and thanks. My Sharp Roku TV just shows the "Sharp Roku TV" every 30 seconds with a black screen in the background, I went to the Roku website for the firmware but the site is asking for a model number that has a letter and 4 digits but I cant find it, I opened the back of the TV and could not find it either, how can I get this? Thanks
Problem is even if you get Roku Model # & Serial Number... you cant get to system menu to initiate upgrade. Would need a bootloader from USB stick to automatically trigger firmware update. Apparently TV manufacturer says ROKU is responsible for all things SW & firmware related.
I need the firmware for Sharp model LC-65LE645U, main board model 3665-0162-0150 / 3665-0162-0395. Any suggestions how I could obtain this. Not available through sharp's web-site.
I update my sharp andoid tv after that only appering is android tv in the screen and the power is open, i waited bout 30mins still the same i unplug it also still the same..?. Whats the problem of my tv?
Dear sir, thanks for reaching out here. I have understood your problem. Don't worry. It will be okay. Just reset it to the factory settings. Go to boot menu and then clear cache memory and reset it to the factory settings. If this is helpful please like and share the video with your friends and subscribe to the channel for next tech video.
Hi didi, please unplug the tv power cable from electric outlet. And wait for 5 minutes and recheck. If not work then apply to flash firmware. Search on website via main board serial number. Any difficulties please let me inform. Kindly like subscribe and share this helpful video with your friends and social media.
Thanks for info. My problem is the first one. Do I just download to the usb then plug it in? Because I obviously can’t get past the logo screen so it must update on its own? I saw a video about upgrading the firmware but his tv was showing menus. Any help would be great 😊
Hi johnson wavut, please apply power cable unplugging method. After applying above then recheck the tv problem. If not work then reinstall tv firmware. Also here is another reasons for the same problem that is main board incorrect voltage supply. In that case required to repair the main Board bad IC, capacitor or transistor. So please recheck again. Any further information please let me know by comments here. Please subscribe the channel, like and share this video with your friends
Dear sir, thanks for reaching out here. Please open tv back cover . Check mainboard serial number. Search this number on Google. Found the firmware. Then install it. If you are not expert. Then dont try please. Any further support required please inform me. I will be happy to help you. If this is helpful please like and share the video with your friends and subscribe to the channel for next video.
Hello, my 65” sharp tv flashes sharp then goes off and on off and on. I can’t reset anything because the screen won’t “start” or allow me to get to any functions. What should I do? I replaced power supply and it didn’t work
Hi friend, thanks for reaching out to me. Your Tv is not turning on after flash. Now you required to Re install the tv firmware via flash drive. Check following process. 1. Format the flash drive by Fat32 format 2. Download the tv firmware. Search online via tv main board serial number. 3. Transfer the firmware to flash drive. 4. Plug in the flash drive to tv 5. Turn on the tv and wait. Now install the tv New firmware automatically. If required select yes or ok . Hopefully this will help you to solve the problem. If the information is helpful please hit the like button and subscribe to the channel. Kindly share this video with your friends and social media to help your friends.
I have a share aquas LC-70le657u. First the TV started and light flashing 3 slow 1 fast. Then I called sharp support and they asked me to press channel down and volume up button together while plugging in the TV. Now the TV starts and stuck on SHARP logo. Please help. Do I need to change parts? Thank You
hi there and good evening. i have a sharp LC-50LE570X model smart LED-TV (firmware v2.13) which after a factory reset (restores TV to factory settings) now can't update apps stating that the storage is full (which in fact has 4.4GB of memory available after the reset). Is there a firmware update to supercede the current firmware and hopefully rectify this problem?
Why not work. Before this you have to format the usb drive in fat 32 format or ntav format. Kindly check actually i have forgotten the format name. Now try and thanks. Please like and share the video with your friends and subscribe to the channel.
How do I open the back of the TV to get to the bar code needed for the USB upgrade? My tv is stuck in the mode where I see the Sharp logo. If I can upgrade something through USB I would like to know the steps to access that information and how to load it into my tv. Thank you!!
Please unplug the tv power cable from electric source and wait for 5 minutes. Now recheck. If not work then check below: This is happening due incorrect voltage supply from power supply board or main board. Hardware issues please contact with tv repair man. Any difficulties please let me know and like subscribe and share this helpful video with your friends and social media.
I've a Sharp Android TV 55BL2EA. It powers on shows SHARP logo then ANDROID logo a couple of minutes then it shuts off. I presume it has occurred after a firmware update. Any help will be appreciated.
Hello! Need help! Have 2013 Sharp Aqous LC-70C6500U, TV acted up at first by losing sound, then progressed to picture (weird color patterns) and would go out. Now it only boots up to "Sharp" logo, then goes black. Getting 3 slow, 1 fast power light blinks. Can not find the info for trying the firmware update, nothing on main board nor back of tv like your video.
Hi David Austin, update tv software via usb drive. Any support needs please let us inform. Thanks 🙏 for subscribing to the channel and share this helpful video with your friends and social media for helping others.
@@FIXNETFLIX Per Sharp support there is no software update for our 2013 model, updates are for 2014 and newer only! Is there any way to test main or power boards to see which ones need replacing? Someone on youtube found the power board regulator to be the issue!
My Sharp tv LC-49CFG6021K is stuck at the Sharp Logo and sometimes restarts back to the Sharp logo. Got the firmware from Sharp but the TV doesn't seem to even recognise the firmware when usb is inserted. 2 different USBs used. Formatted to Fat, Fat32, NTFS still no luck. Help plz
Hello! Can you help me about what happened to my sharp lc32le375x? I reset my TV then after a minute it restart and stuck in sharp logo. Sometimes it turns off automatically and turn on. Please help
I have a sharp tv having the logo only issue, I have put a usb drive into the tv but the tv never showed any sort of evidence of taking the firmware update. It’s an older tv that was never updated, when added to WiFi it tried to update but had no firmware to build off and won’t turn on. Any ideas? TIA
my issue is stuck on sharp logo. firmware update is not working, i tried opening and reseating all wires and still not working. i am using 16gb usb stick FAT32 i also try 8gb usb stick also does not work, volume down and input method not working, dont know what to do pls help
Hi bro, thanks for reaching out. Please follow the below instructions step by step: 1. Turn on tv. 2. After 1 minutes later disconnect the power cable of from wall outlet . 3. Hold the power button or remote power button for 10 seconds. 4. Wait few minutes then plug in back the tv power cable and turn on the tv. 5. Now recheck the issue Hopefully this will help you to solve the problem. If not work then reply me immediately. I will be happy to answer your query. If this information is helpful please please like, subscribe and share this helpful video with your friends and social media.
Hi Friend, currently I have not available the desired tv model firmware . Kindly search the firmware via tv main board serial number on tv forum sites or company websites. Thanks for subscribe like and share this helpful video with your friends and social media for helping others.
FIX] Sharp LC-65LE645U Stuck on Sharp Screen I just wanted to create a post in case some one comes into the same situation I did. Backstory: Went to update the firmware on the Sharp LC-65LE645U and the TV froze for an hour. Ended up unplugging it and replugging it in and it only showed the Sharp screen. So I tried to do the whole factory reset and held the input and volume down buttons at the same time and plugged the TV in, but instead of getting the little K on the screen I got the Sharp logo. I tried looking up the firmware on the Sharp support site but there was none. So I called Sharp support line and they said since the firmware was not available I had to call a TV repairman to get it fixed. The TV repairman wanted $90 just to come over and was telling me it will probably be the main board on the TV that needs to be replaced which costs like $200 without the labor. So I decided not to have them come out and did a little digging. The fix: So I found another Sharp TV that had the same specs and everything and the model was similar. It was the Sharp LC-65LE654U model. I downloaded the firmware on the computer and extracted the zip file using 7zip (you can also use WinRar) and changed the name to "install.img" (no quotation marks). I then formatted the flash drive on my computer to FAT32 and copied the file over. I unplugged the TV and inserted the flash drive into the USB slot on the side of the TV and plugged the TV in. The firmware started to install and the TV is working again. *I also wanted to note that I came across the same solution while digging 20+ pages in Google on a random forum. So props to that user for confirming my thought process. I came to this subreddit earlier looking for some sort of fix and came across nothing, so I wanted to post this just in case someone gets themselves in the same situation I was in. UPDATE 1/18/2021: I have gotten message from several people since this post. I believe Sharp has removed the software from their website. I still have it and the link for it is here. I hope this helps. TV is still working and we use it everyday!
hi sir can you help me please.. my sharp aquos is also freeze until na logo appearance after resetting..can I ask if you can assist me please..model type Sharp Smart Aquos LC-32SA4500X
Hiii sir When I reset my sharp smart led. When I do turn it It showing sharp logo on the screen. And it's aromatic get off and on. Can u give me any solution . Sir
Hello I have a Sharp LC-60LE660U I have the "Stuck on sharp logo" screen issue. I have the firmware unzipped on a USB key, plugged in and turned on but no change, USB drive doesnt flash but does light up... anything you can suggest would be appreciated.
i have same problem on my sharp aquos 2T-C45AE1X...but no firmware available to download..can you pls help me? where can i download 2t-c45ae1x firware...🥺
Hi, I've tried to update my Sharp TV my a USB key but now it is stucked : black screen and blinking power light. How can I perform a firmware reset ? thanks for your help guys.
Hi hashim, recently i don’t have the firmware for this model. You can download is from various forum or company website. However any additional information need please let us inform. And thanks for your nice subscribing and sharing this helpful video with your friends and social media for helping others.
Hi kirby taylor, if you’re are facing the same problem then install tv firmware via usb drive. After install the firmware tv doesn’t open then check main board. Contact with tv Technitian. Any difficulties please feel free to ask me. Thanks for like 👍 subscribe and share this helpful video with your friends.
You are most welcome dear pain. Any troubleshooting support needs please let us inform and subscribe the channel for next update. Please share this helpful video with your friends and social media for helping others.