HOW to FIX Steering on 2016 Yard Machines 42" Riding Mower

Подписаться 5 тыс.

Просмотров 7 тыс.

50% 1

Thank you for watching! If you enjoyed the video, or found it useful, feel free to like the video and subscribe for more content! I recently launched my merchandise shop! The quality of the merchandise is great and the designs look amazing! Feel free to check them out! All support is greatly appreciated :)
L&M Store Link: landmrepair.my...
A customer brought in a 2016 Yard Machines by MTD 42" riding lawn mower. The steering was messed up. When you turned the steering wheel, the tires would not turn. I go step by step on replacing the steering shaft and bushing.

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 19

@roybo99 2 дня назад

Great video man! Inspecting mine tomorrow. Now I know what to do. Thank you for this.

@samkitty5894 4 месяца назад

Steel steering shaft inside metal bushing with NO lubrication. What could go wrong??? What an idiotic design. I had 44 year old Simplicity that gave me no problems ever. Original seat, bearings, deck, ball joints. It was made in the USA when people cared about the quality. Now I too have a newer piece of crap mower and I have to replace this bushing every season.

@jameshausler5259 4 месяца назад

The one I did on an MTD Toro had a separate steering gear on the shaft. Much easier to put in than this one. I only needed to remove the deck and no other components other than the gear.bushing itself.

@EdHallPhotoFL 4 месяца назад

Thanks that was very helpful. Got to do this when the parts come in. One question what was the tool you used when you hit the screw on the underside of the mower and why?

@The_G 4 месяца назад

@EdHallPhotoFL - It is a manual 'Impact Driver' - By hitting the large main body with a hammer, the force is transmitted through to the driver end, causing a small movement that turns (clockwise or anticlockwise) and the force of the hammer hitting the main body also sends a shock to the nut or screw that aids it to loosen. I found a RU-vid video about it here that may explain it better... ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-q-rOkpWcDR8.html

@philliphall5198 2 месяца назад

Once you get it out put a regular bolt back and blue lock tight liquid 😊

@philliphall5198 2 месяца назад

The bronz bushing is way too small and it’s made too fail in a short amount of time MTD is not as good as the China companies 😢😢😢 Wish Murray would come back ❤❤❤

@philliphall5198 2 месяца назад

I’ve replace over a hundred in the last several years 😢😢😢

@The_G 4 месяца назад

Thanks for this video - just about to order the parts and carry this out - much appreciate the time and effort you put in to explain this repair.

@lmsmallenginerepair4471 4 месяца назад

Glad it helped

@dragthis2006 3 месяца назад

😊 thank you so much sir. My mower has been broken for years now. At least 7 years It's a 1990s husky with a Tecumseh motor and I've always been intimidated to fix it but now I can. Thank you!

@lmsmallenginerepair4471 3 месяца назад

Glad it helped

@jeffe9499 2 месяца назад

i got a 38 inch 2008 bolens mower replaced steering shaft and bushing also plate and tie rod still popping and stripping steering shaft am i doing something wrong or could there be more that im not seeing

@lmsmallenginerepair4471 2 месяца назад

how is the gear plate

@jeffe9499 2 месяца назад

@@lmsmallenginerepair4471 brand new

@jeffe9499 2 месяца назад

i am currently going to buy a new mower just tired of putting cash into this thing and getting the same results could be the axles are bent as well im just not sure but i replaced all the parts in the steering except the axles and bushings