How to Fix Trigger Buttons on Xbox Elite Series 2 Controller | LT RT Sticking Stuck Repair Replace

Подписаться 55 тыс.

Просмотров 16 тыс.

50% 1

You Elite Xbox controller (PC Xbox One, Series X or S) you may be experiencing issues with the LT and RT buttons, such as not registering a press, stuck in down position (jammed), stuck in up position, one button activates the other, too easily activates, activates on it’s own, loose button, makes a noise, limited bounce, goes to 100% to easily, never reaches 100%. This tutorial shows many ways to fix the issue, which range from cleaning, to inspecting and replacing internal parts.
• How to Configure an XB...
Patreon:
/ kevinsthreechannels
Use "Buy Me a Cup of Coffee" to make a one-time donation:
www.buymeacoffee.com/HowToX
Replacement Parts and Tools:
Entire LT & RT Button: amzn.to/3T8ZUql
Top of LT & RT: amzn.to/3T2USvq
Springs: amzn.to/4a7Zk2W
Screws: amzn.to/3Ttv2Cf
Repair Kit: amzn.to/3TtYrur
My Recording Setup:
Sony Lapel Microphone: amzn.to/3T7M2wF
Wireless Microphone: amzn.to/3xG04uO
Webcam: amzn.to/3vLgGDO
Microphone stand: amzn.to/40RR047
Narration Mic: amzn.to/4c7Exys
Camera Tripod: amzn.to/3QUA1JE
Splitter for PS3 and Vita: amzn.to/49RKbn5
Sony ZV-E10 Camera: amzn.to/3uuBRtv
PC Cart: amzn.to/40SOH0G
All Amazon links above are affiliate links. I get a small amount of money if you end up using them to make purchase (it does not have to be for the item I link to, as long as you click my link then move to another item, it works)
..............................................................................................
Timestamps:
00:00 What This Video Covers
01:14 Four-Step Cleaning
02:20 Cotton Mashing
03:11 Configuration Changes
07:31 Getting Inside
11:49 Inside Work
..............................................................................................
#xbox #controller #xboxseriesx

Игры

Опубликовано:

5 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 27

@HowToX 4 месяца назад

Things you might need: Entire LT & RT Button: amzn.to/3T8ZUql Top of LT & RT: amzn.to/3T2USvq Springs: amzn.to/4a7Zk2W Screws: amzn.to/3Ttv2Cf Repair Kit: amzn.to/3TtYrur All Amazon links above are affiliate links. I get a small amount of money if you end up using them to make purchase (it does not have to be for the item I link to, as long as you click my link then move to another item, it works)

@griffinmaynard2358 2 месяца назад

its ridiculous that such an expensive controller has so many problems

@lllULTIMATEMASTERlll Месяц назад

I would recommend anyone to not get the controller. It’s great but there are so many issues. I wanted to just map on of the paddles to screenshot and then hold for recording a clip. Can’t do it. Also can’t dim the light to turn off. And also I’ve had sticky triggers twice. They need to make a series 3 and make it not have this many issues.

@CadenBeasley-ir2nw 5 дней назад

Mine dosent have any problem, I just dropped mine and the joy stuck won’t push down, just a simple fix.

@Axel.U 2 месяца назад

Thanks a lot man, I couldn’t figure out how to get that rod out without damaging the plastic and when looked online I couldn’t find any “how to” or “guides” how to get it out, not even on IFixIt, then I found your video and with your help I managed to get the rod out and replaced my broken trigger with a new one, my controller is now working! Great video, very informative. Thanks again!

@roundchelsea8403 3 месяца назад

Absolute lifesaver fixed my stuck trigger and it works like a charm again 🎉

@MrBenAttenborough 2 месяца назад

Thanks so much for this, seems there was some bit of dust or grit behind my left trigger that was forcing it to be stuck on. A bit of cardboard did the trick. I didn't even need to buy tools to open it up!

@Epsilon7981 Месяц назад

Yo thanks man, I tapped the side of the controller and it fixed quick! Much appreciated!

@charliemiskelly7053 Месяц назад

Great video I didn’t have any pliers so I used some old crappy tweezers and it did the job came it really quick just need to buy a spring for it now

@juniebean9920 Месяц назад

Thank you! This helped so much!

@Chad-56 17 дней назад

Thank u so much

Месяц назад

Any possibility to fix mechanical deadzone? I'm having a hard time setting it up to work on lowest sensitivity, the pad doesn't register clicks consistently and I don't really want to delve into software adjustments, as it''s only a workaround.

@MyBryant123 27 дней назад

I clean mine very well is a new controller i just open to see if something bad , but , the problem is only in the 3 short mode , is not reading properly only when i bend a little bit the LT , but if press normal without bend , is not reading , in the other modes read perfectly

@jjsnots7593 2 месяца назад

Thanks

@bryanjacobs1423 Месяц назад

There's also a switch on the back that makes the button stuck, check if it was inadvertently pressed

@emparow2978 Месяц назад

I’ve done it first attempt, i m so good, i can coach you if you want .

@alessbc1781 3 месяца назад

Thanks for the video. My LT button registered 1.0 on the first two levels of the hair-trigger lock but 0 = no response for the last one. Is there any way to fix it?

@MrAwMan 3 месяца назад

Bro i had the same problem but I fixed by changing the deadzone ( 25 - 100) i hope you can fix it too

@NotProPlayer1 3 месяца назад

Same problem with my RT last point doesn't work

@NotProPlayer1 3 месяца назад

@@MrAwManI'll try that method

@magnusarnason7105 Месяц назад

i love you

@MrAwMan 2 месяца назад

Bro question can you show ways to fix unresponsive paddles on this controller pls?

@HowToX 2 месяца назад

I haven't done that before, but I suggest you clean the areas when the paddles connect to the controller. Go inside if needed and clean them from the inside.

@MrAwMan Месяц назад

Bro I fixed it by putting a piece of paper on the button outside in the back and now I can feel the click