How to Fix Uneven Frets | Guitar Tech Tips | Ep. 41 | Thomann 

What influence does the truss rod tension have on this? Is it relevant for measuring the height, may I loose it before checking the heights?

That’s a great video. Really clear explanation. I’ll check this on my guitars 👍

Thank you! After watching other YT videos on this topic, I was prepared to do some heavy filing. But your approach is much, much better!

Loved the tone you got out of that at the end. And thanks for the high fret tip!

Best simple tip I've seen Excellent !!! Thank you

Thanks for the advice! I've got a Strat style guitar that I've owned for over ten years. I'm not much of a player, but I'm working on my own music now, so sometimes I need to record stuff. I only recently discovered some fret issues because I'm finally starting to play higher up the neck, on frets that frankly have never been used on this guitar. There are two frets that are out of line, and it only affects two of the strings. I've messed around a lot with the truss rod and it doesn't help. I have to raise the action on those strings significantly above the others to avoid the issue, or just raise all of the strings to that level. I don't know if anyone loves high action if they can avoid it. I don't love it. Action changes intonation anyway, taking A Bridge Too Far. I really shoehorned that joke in there. But yeah, basically when I raise the action high enough to get all the frets working on those two strings, I can't get proper intonation because the springs are fully compressed before I can get them where they need to be. Trimming the springs could be a thing, but I don't love making a priority out of high action. I'm bad enough at playing this instrument already without making it more difficult and annoying to use. So I do think it's finally time to start applying solutions that will semi-permanently affect the guitar. ("Semi" since frets can be replaced but blechhhh.) It's a very inexpensive guitar, so it's not really worth having it done professionally. I'll just wing it, and if I screw it up, I can finally buy a prettier axe that should improve my licks at least like 500%, conservatively.

Hey Chris excelent video! Easy way to fix it!! Thanks!!!

Thanks a lot for your tips, very easy to understand!

Love your videos! Thanks again

Thank you man, excellent work. Good. Continue

I like your approach...I have seen folks use leveling tool to sand entire neck...ok in extreme cases but checking to see if its 1 to 2 rogue frets could save loads of time to produce same result.. I have all the simple hand tools to sand check neck and fret level... but going to order fret crowning tool now...

Good instructions, thanks. I am a home hobbyist and trying to decide if hammering the fret or filing it were the right choice. I will hammer it first and follow up with a file. :-)

Hi, Thank you for this very interesting vídeo. I wonder if this kind of repair can also be applied to any classical guitar? I also wonder what can be done if instead of the 2nd fret being too high (as you mentioned in this video) the problem was on the 3rd fret that is too low? Can you please do a video on leveling all frets on a classical guitar? Thank you I'll be looking forward for your next video about leveling all frets, if possible.

Great video! I really appreciate the fact that you didn't start this video with the file. In my case all my frets seem to be good, only one fret is popped up a little bit and you can see on the side that it's popped up that there's a tiny Gap. If you go straight to a file in that case you may fix the buzz but not address the gap. and on the high string side, a string could get caught. Or anything for that matter and make the problem worse.

Great video.

Very nice demo riff 👍

That rocking tip is great. thx.

Thank you for sharing the video! Greetings from Latvia! Marko

Great tips and save a lot of time

Great video,helped me pinpoint a high fret

good stuff.and playing too.

dude, that's the first intro lick i've actually rewound to listen to a 2nd time! haha nice one ✌🤠

Nice one I bought a pack of fret erasers & got one of these rockers in it .. But I didn't know what it was for until now Lol I have a long notched fret twin sided " Straight edge " ? but I know that for myself I can only really tackle small jobs on a guitar .. Fret sprout & rough edges etc One thing I don't understand when it comes to intonation etc especially on acoustic guitars is why do more guitars not have a Zero Fret & why after 40 years are we suddenly all having compensated bridges ? I use my acoustics for different uses .. some open tunings & some for slide .. So I wonder why there are not string sets designed for this use like DADGAD & Open E major tuning ? Really enjoy the tech tips series Thanks a lot . Much easier to take in small segments . Stay safe & let's hope we all have a better summer this year . Bye

Did it by myself this morning. Very slowly , on step at à time filing , checking , filing and checking again. Result is absolutely perfect. Thank you so much. Only issue. 1000 fret gum not sufficient for a good polishing

Love it now I know what I’m Paying my luthier for ! 👍🏼 Craftsman!

Good video. Any particular advice when working stainless steel frets?

Awesome! Can you show how to fix a broken wood point between the nut and the end of the fretboard on a stratocaster style? I broke a small piece of my HB ST62 when replacing the nut.

Thank you!

As I understand it, if you have buzz on frets between fret 1-12 a trussrod adjustment could fix it. In my case I have a buzz when fretting the 13th fret. Using a creditcard's short side as a "rocker", I suspect that fret 14 is too high since it rocks between frets 13-15, the surrounding frets are fine. I will try the "hammer on" technique 😀

I was shocked when I first entered luthiers cave and saw him smashing 1.5k € strat with a hammer Two years later I was smashing Epiphone custom with hammer myself 😅 I love how you show proper way to do stuff with every safety precaution. Taking strings off before hitting is really important. You really want to avoid having frets marked by string smacked in by a hammer

Do you work for Thomann? ..... if you do - I have to say I bought a Harley Benton Bass recently and the set up was the best I have ever seen for a "cheap" range bass - seriously better than many expensive range basses - I only bought it as a back up bass to practice on - but am really impressed with the set up and build quality. I am a converted fan!!

hi kris. thanks for the informative video as usual! i have the same issue with the 7th fret on a strat type guitar, but i think that the fret is too low. a guitar tech recommended that i do a plek job. would you do the same thing? also.. a plek setup could be a nice topic for a video :) cheers!

Muito bom trabalho

Amazing tips here, can't you also share a link for a suitable brass hammers?

I have looked at a couple fret repair videos on you tube. Yours is the only one that suggest reseating the fret before taking a file to them. Do you suggests adding any super glue to the reseated fret when using the brass hammer? Is there any technique on adding the super glue if you do? Thank you for the video.

Thank you Thank you!

Hallo. I bought a new Epiphone 50sLes Paul Gold Top a month ago and l'm in love with this guitar bit playing l noticed that on the 15th and 20th fret the hi E string buzzes but only when l play bendings... What can l do??? Thanks a lot... Great youtube channel👍👍👍

Excellent video Kris! Where can we get this brass hammer? Couldn't find it on Thomann website.

Great tech tip Kris! Pesky high frets, take that! 😊👍

Does Thomann sell a fret levelling kit and a nut adjustment kit for Squier Jaguar guitars? (not sure whether it's guitar specific)

Hi Kris :) Thanks so much for the videos. I have learned a ton and have been able to start setting up my guitars much better than in the past. Question: I am finally at the stage where I want to try fix my uneven frets. I am trying to buy the tools used in this video, but see many different types of fret files. Which one(or maybe I should say what type?) are you using in this video? Does it depend on the type of frets on the guitar? Thanks in advance :)

Great explanation! A question: I have buzz from the 12th fret to the last ones. I suspect the last fret is high. How can I make sure that's the case? The fret rocker won't help there.

I wish you were my neighbor Kris. Nice job as always!

on my acoustic MATON, B string is buzzing only at first 3 fret position. what to do ? shim the nut for B string ? polish the frets ?

What camera and lens did you use? Great picture.

Thanks for the channel and your valuable knowledge. I have a stupid question. If we have to push with a hammer a freet, what will happen with the glue it is supposed that the freet was glued during guitar assembly? Could that freet will be susceptible of falling?

Can you do a vid on shielding a jazz bass??

Hello Kris! 🤘 Truss rod buzz-ra milyen kezelést javasolnál? // Therapy suggestions against truss rod buzz? 👀

Could u tell what to do to fix a fret board which is curved inwardsnear the sound hole

If there are several high frets at what point would u level all the frets ? Thx

What would you recommend for a fret that's worn down more than the others, or has a big low spot? I'm starting to see this on my oldest bass where the strings are wearing down areas of the frets, similar to what you'd see on very old stairs.

Can you use a plastic hammer on the frets. or only brass?

Can't find the File u used in the description Box. Can u send me a link?

You need to take the strings off first and the then adjust the truss rod, use a notched straight edge (matched for the fret spacing) to get the fret board flat, before you start using the fret rocker.

Great Kiris, you've pulled the sheet off one of the mystery's concerning fret maintenance. Does Thomann sell a fret rocker kit ?

Anyone can help me.? My Harley Benton Sc 450 plus is always out of tune ( G string) when fretted chords. I Intonationen it, sanded the nut, and etc. but still it does the same problem. What could be the reason of this ? Thanks ahead.

Love these videos. But how do you know if the fret is too low? You didn't mention that in the video.

Cool

If you hammer the fret down, how do you make sure it doesn't pop up again after a while? Also, what is the cause of high frets? How come even guitars with very good quality control sometimes end up with a high fret?

if one of the fret isn't straight, mean a little bend to left .. is there a solution for it without removing the fret ? .. i mean like pushing it with hammer or something ?

Is there a video for nut adjustment? Height of nut, filling ...?

Is it important to use the correct size crowning file, or can you just as easily to it with the 3mm?

I dont know how you put those strings back on, would have loved to have seen it.

please tell us what to do if the first fret is loo low? You have to raise it. How to?

What crowning file is that?

NOTE: Some times a fret that you hammered back down will raise back up over time. Something too think about if you're working on a customers guitar.

Nice! I would, however, recommend taping between the frets, no matter what type of fretboard you have. A scratch is a scratch.

Me on my telecaster; i'd adjust only the saddle bridge allen screws and the one buzz on my g string on 9th string has gone and cheers 🍷.

Good video, where can i buy that file?

Thanks for this fix! Very helpful. Isn't it true you shouldn't take all 6 strings off of a guitar so you don't damage the neck?

I mean the fretfile you are using?

What about the truss rod tension ? Do you release it beforehand ?

Uneven fret is a fret that slipped out its groove. The best way to fix this problem is to use super glue medium viscosity and a spring clamp. If it slipped out, you can hammer it, it will slip out again later. Another solution is to take the fret off, use a fret crimper to widen the tang, and put it back.

Da hab ich angst, das laß ich lieber den gitatrenbauer machen, der hat's voll drauf 😄 ( Sehr schönes pick und so leicht zu finden 😄 ) 🐈

That guitar sounded great.

So i started tapping the frets as instructed and they started coming out of the slot on the fret edges, as if the glue is not holding it down anymore. Now what???

What Hosco file is that you used?

Brass will ding a nickel fret, I think you meant brass will not ding a stainless steel fret. I would have used a hard rubber or plastic mallet. But I like the information on your video anyways, especially how to check if the fret is high or actually the subsequent fret is low. Good job.

i just got into fixing my own guitars after 40 years of playing, and your video's are amazing!! could you tell me the weight of the brass hammer you used in this video? i was thinking about a 4 or 6 oz weight, but i wasnt sure. any advise would be greatly appreciated! thank you again for your wonderful video's!!!

good job, but I would always use a permanent maker, just to be completely sure.

I used a red ended plastic flooring hammer and it created a flat spot. To be fair this is on a kit explorer and I kinda think the frets weren't seated 100% but after leveling it a little I'm afraid to make anything worse then it is as now its on the a string on the 15th fret and that's it really. Just saying this, be careful lol. Don't go crazy because you can create a dent that will be ery hard to get rid of. Did the same thing on a cheap Amazon strat with no issues so just be careful

If you don't make the neck flat before you check height with the rocker and start filing, you just "F"ed up the whole process.

Does temperature and humidity changes causes uneven frets?

What fret crown file did you use?

What's the crowning tool you use?

let's say the 2nd fret was lower then the other ones what would you do then?

on my second string I have 3 frets that sound the same note. hahaha. ??? the 21-22-23 what to do? theres zero videos on this.

can I Use a plastic hammer?

My Hofner violin bass needs some of this bashing and crowning - it's a shame that the original 'luthier' was somewhat incompetent. ;)

What if the problem isn't a high fret, but a low one? You have to take some off of every other fret?

Your playing was great but I felt like the sound was a bit muddy. Is it because of pick ups or some other reason you think ? Maybe it’s just me.

Mines not doing hammer ons on the e. Frets high I bet.

Looks like you are using an end dressing file to re-crown. Note sure that is correct.

How would you tell if a fret is actually low instead of high?

My fret on Acustic doesn't even play it's just a dull muted sound

How do you do if the 1st fret is too high?

Don't you want to make sure the fret is lifting before you start hammering?

At what point should you just go for a fret leveling job like you do in this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BxuHZwoZ6S8.html

well shit, with the help of a credit card a rubber hammer i got a problem fret (17, b string) to work agian! kudos!

I’m confused between this method and using a beam