Welcome to your new flow-wand! Here you'll find an overview of the wand and some tips on getting started with your flow.
2:43 How to :: convert to long string flow-wand
If you're interested in converting from short string to long string wand, we'll show you how in the second part of the video. Watch until the end for some tips on starting your long string wand journey!
Depending on which method you're using, you'll need:
scissors
paper clip or ballpoint pen
lighter
INSTRUCTIONS:
2:53 Method 1: convertible/temporary long string setup
3:15 Remove string from included string pack and find your preferred length
3:35 Tie slip knot
3:58 How to undo slip knot
4:05 Remove swiveled finger loop
5:01 Attach long string loop to short string loop
5:22 Convert back to short string from temporary setup
5:56 Reinstall swiveled finger loop
6:13 Method 2: dedicated long string setup
6:17 Cut short string loop off wand
6:42 Feed string through using paper clip (tip 1)
7:16 Feed string directly through, using ballpoint pen to widen hole (tip 2)
8:45 Find your preferred length with long string threaded through
9:20 Tie half hitch or figure 8 knot
10:10 Cut excess string
10:22 Melt ends to secure knot
10:33 Install o-ring
===========================================
Access the full flowtoys range of LED & day props at: flowtoys.com/p...
Learn more about flowtoys, our mission & design values: flowtoys.com/a...
Discover the stories behind the toys: flowtoys.com/t...
Enjoy reading the history of our small company: flowtoys.com/h...
find more inspiration, tips and awesome stuff at www.flowtoys.com
4 окт 2024
